Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Fiber Lasers and Glass Photonics: Materials through Applications

Effect of bi-directional excitation and external feedback on the mode structure of distributed-feedback lasers

Jerry Yeung, Anirban Sarkar, Markus Pollnau

Published May 25, 2022• 1 citation
Publisher

Abstract

Rare-earth-doped solid-state lasers utilize distributed-feedback (DFB) resonators to generate ultra-narrow-linewidth emission down to a few kHz. The longitudinal modes of a single Fabry-Pérot and a DFB resonator are influenced by the structure, the optical excitation configuration, and external feedback, as has been observed experimentally. Here we investigate the influence of bi-directional launching of light and external feedback on the longitudinal modes of single Fabry-Pérot, double Fabry-Pérot, and DFB resonators. These results can be exploited for the technological advancement of DFB lasers.

DOI
10.1117/12.2621959

Related papers

Static and Dynamic Optical Bistability in Fabry-Pérot and Distributed Feedback Resonators with Quantum Well structures

F. Castelli, L. A. Lugiato, Gian Paolo Bava +1 more

Recently relevant results on optical bistability in Multiple Quantum Well (MQW) structures at room temperature have been reported [1]. In this paper a rather complete model for optical bistability in Fabry-Pérot (FP) and Distributed Feedback devices (DFB) including a MQW structure is described. It includes the optical dielectric response of the MQW structure, the static output power vs. input power and finally the dynamical behaviour.

Nonlinear Dynamics in Optical Systems•Jan 1, 1992•0 citations

Combined distributed feedback and Fabry–Perot structures with a phase-matching layer for optical bistable devices

Jian‐Jun He, Michael Čada

A combined distributed feedback and Fabry–Perot (DFB/FP) structure with a phase-matching layer is proposed for optical bistable devices. Using a simple and versatile nonlinear transfer-matrix method, we demonstrate that the DFB/FP structure can have a much lower bistability threshold than a single DFB structure with a comparable total thickness. The combined structure can also have lower threshold and less sensitivity to absorption than a traditional nonlinear Fabry–Perot etalon.

Applied Physics Letters•Nov 2, 1992•91 citations

Rubidium spectroscopy with 778- to 780-nm distributed feedback laser diodes

Anselm J. Deninger, Sebastian Kraft, Frank Lison +1 more

Distributed feedback (DFB) laser chips have recently become available at wavelengths that match the D1 and D2 resonance transitions of alkaline atoms. We investigated the spectral properties, tuning characteristics and modulation behavior of continuous wave, single-mode DFB diodes at 778-780 nm and performed high-resolution spectroscopy of Rubidium vapor. The mode-hop free tuning range of the DFB diodes was as large as 2.4 nm (1186 GHz). The line width of the laser diodes was examined both with a heterodyne beat experiment and with high-resolution Doppler-free two photon spectroscopy, yielding a half width of 2-2.5 MHz. The saturation spectra of the D2-line of 85Rb and 87Rb were recorded with a resolution close to the natural line width. The emission frequency was actively stabilized to Doppler-free transitions with a relative accuracy of better than 4 parts in 109 using commercially available servo devices only. The output power of 80 mW was sufficient to allow for two photon spectroscopy of the 5S-5D-transition of 87Rb. We conclude that the performance of the DFB laser equals that of grating-stabilized external-cavity diode lasers (ECDLs), without the mechanical complexity of the latter systems. The DFB diode is thus well-suited to high-resolution applications in alkaline spectroscopy, including laser cooling and optical manipulation of ultra-cold atoms.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Apr 28, 2005•2 citations

Optical bistability in a multiple-quantum-well structure with Fabry-Pérot and distributed-feedback resonators

Gian Paolo Bava, F. Castelli, Pierluigi Debernardi +1 more

The system we analyze has the structure of a planar optical waveguide containing a multiple quantum well, with the planes of the wells parallel to the direction of propagation. We consider the two different configurations of a Fabry-P\'erot cavity and distributed-feedback device. The optical nonlinearities are described by means of the first-principles theory developed by Haug, Koch, Schmitt-Rink, and co-workers, generalized to include the finite width of the wells. The dynamics of the system is described by the equations that govern the evolution of the two counterpropagating fields, coupled with the carrier-density equation, and accompanied by the appropriate boundary conditions. The steady-state behavior is analyzed as a function of the control parameters of the system for the case of a GaAs/${\mathrm{Al}}_{1\mathrm{\ensuremath{-}}\mathit{x}}$${\mathrm{Ga}}_{\mathit{x}}$As/AlAs structure. The system develops bistability even when the input field is in resonance with the excitonic peak, but the phenomenon becomes more pronounced in the detuned configuration. The hysteresis cycles obtained in the case of distributed-feedback device turn out to be competitive with those displayed by the Fabry-P\'erot system.

Physical Review A•Apr 1, 1992•9 citations

Optical injection effects and all-optical set-reset operations in two-segment strained multiquantum-well distributed feedback bistable lasers

Jianying Zhou, Michael Čada, G. P. Li +1 more

Optical injection effects and all-optical set-reset operations in two-segment strained multiquantum-well (MQW) distributed feedback (DFB) bistable lasers were experimentally investigated. The optical bistable characteristics under detuned optical injection, of strained MQW DFB bistable lasers, show the effect of the residual Fabry–Perot side modes of the DFB structures; optimizing the input wavelength and the input power is suggested for applications. The switching properties of dynamic optical set-reset operations with pulsed optical injection were reported, which appear to be related to the optical bistable characteristics under cw optical injection; however, the switching transients are found to be essential to full understanding of these switching properties.

Journal of Applied Physics•Apr 15, 1996•3 citations

Effect of mode nonorthogonality in Fabry-Perot/distributed feedback laser

Anna Tyszka-Zawadzka, Paweł Szczepański, Wiesław L. Woliński

A fundamental source of quantum noise in laser devices is spontaneous emission from upper level atoms. It is well known that the nonorthogonal nature of the laser modes can enhance a coupling of the spontaneous emission from the active medium to the lasing modes.1,2

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jan 1, 1994•0 citations
Rare-earth-doped solid-state lasers utilize distributed-feedback (DFB) resonators to generate ultra-narrow-linewidth emission down to a few kHz. The longitudinal modes of a single Fabry-Pérot and a DFB resonator are influenced by the structure, the optical excitation configuration, and external feedback, as has been observed experimentally. Here we investigate the influence of bi-directional launching of light and external feedback on the longitudinal modes of single Fabry-Pérot, double Fabry-Pérot, and DFB resonators. These results can be exploited for the technological advancement of DFB lasers.
Distributed feedback (DFB) laser chips have recently become available at wavelengths that match the D1 and D2 resonance transitions of alkaline atoms. We investigated the spectral properties, tuning characteristics and modulation behavior of continuous wave, single-mode DFB diodes at 778-780 nm and performed high-resolution spectroscopy of Rubidium vapor. The mode-hop free tuning range of the DFB diodes was as large as 2.4 nm (1186 GHz). The line width of the laser diodes was examined both with a heterodyne beat experiment and with high-resolution Doppler-free two photon spectroscopy, yielding a half width of 2-2.5 MHz. The saturation spectra of the D2-line of 85Rb and 87Rb were recorded with a resolution close to the natural line width. The emission frequency was actively stabilized to Doppler-free transitions with a relative accuracy of better than 4 parts in 109 using commercially available servo devices only. The output power of 80 mW was sufficient to allow for two photon spectroscopy of the 5S-5D-transition of 87Rb. We conclude that the performance of the DFB laser equals that of grating-stabilized external-cavity diode lasers (ECDLs), without the mechanical complexity of the latter systems. The DFB diode is thus well-suited to high-resolution applications in alkaline spectroscopy, including laser cooling and optical manipulation of ultra-cold atoms.
The system we analyze has the structure of a planar optical waveguide containing a multiple quantum well, with the planes of the wells parallel to the direction of propagation. We consider the two different configurations of a Fabry-P\'erot cavity and distributed-feedback device. The optical nonlinearities are described by means of the first-principles theory developed by Haug, Koch, Schmitt-Rink, and co-workers, generalized to include the finite width of the wells. The dynamics of the system is described by the equations that govern the evolution of the two counterpropagating fields, coupled with the carrier-density equation, and accompanied by the appropriate boundary conditions. The steady-state behavior is analyzed as a function of the control parameters of the system for the case of a GaAs/${\mathrm{Al}}_{1\mathrm{\ensuremath{-}}\mathit{x}}$Gax{\mathrm{Ga}}_{\mathit{x}}Gax​As/AlAs structure. The system develops bistability even when the input field is in resonance with the excitonic peak, but the phenomenon becomes more pronounced in the detuned configuration. The hysteresis cycles obtained in the case of distributed-feedback device turn out to be competitive with those displayed by the Fabry-P\'erot system.
Optical injection effects and all-optical set-reset operations in two-segment strained multiquantum-well (MQW) distributed feedback (DFB) bistable lasers were experimentally investigated. The optical bistable characteristics under detuned optical injection, of strained MQW DFB bistable lasers, show the effect of the residual Fabry–Perot side modes of the DFB structures; optimizing the input wavelength and the input power is suggested for applications. The switching properties of dynamic optical set-reset operations with pulsed optical injection were reported, which appear to be related to the optical bistable characteristics under cw optical injection; however, the switching transients are found to be essential to full understanding of these switching properties.