Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

Rubidium spectroscopy with 778- to 780-nm distributed feedback laser diodes

Anselm J. Deninger, Sebastian Kraft, Frank Lison, Claus Zimmermann

Published Apr 28, 2005• 2 citations
Publisher

Abstract

Distributed feedback (DFB) laser chips have recently become available at wavelengths that match the D1 and D2 resonance transitions of alkaline atoms. We investigated the spectral properties, tuning characteristics and modulation behavior of continuous wave, single-mode DFB diodes at 778-780 nm and performed high-resolution spectroscopy of Rubidium vapor. The mode-hop free tuning range of the DFB diodes was as large as 2.4 nm (1186 GHz). The line width of the laser diodes was examined both with a heterodyne beat experiment and with high-resolution Doppler-free two photon spectroscopy, yielding a half width of 2-2.5 MHz. The saturation spectra of the D2-line of 85Rb and 87Rb were recorded with a resolution close to the natural line width. The emission frequency was actively stabilized to Doppler-free transitions with a relative accuracy of better than 4 parts in 109 using commercially available servo devices only. The output power of 80 mW was sufficient to allow for two photon spectroscopy of the 5S-5D-transition of 87Rb. We conclude that the performance of the DFB laser equals that of grating-stabilized external-cavity diode lasers (ECDLs), without the mechanical complexity of the latter systems. The DFB diode is thus well-suited to high-resolution applications in alkaline spectroscopy, including laser cooling and optical manipulation of ultra-cold atoms.

DOI
10.1117/12.590386

Related papers

Rubidium spectroscopy at 778–780 nm with a distributed feedback laser diode

Sebastian Kraft, Anselm J. Deninger, Christian Trück +3 more

We have performed high resolution spectroscopy of rubidium with a single mode continuous wave distributed feedback (DFB) laser diode. The saturation spectrum of the D 2 -line of 85 Rb and 87 Rb was recorded with a resolution close to the natural line width. The emission frequency was actively stabilized to Doppler-free transitions with a relative accuracy of better than 7 parts in 10 9 using commercially available servo devices only. An output power of 80 mW was sufficient to allow for two-photon spectroscopy of the 5S-5D-transition of 87 Rb. Further, we report on the spectral properties of the DFB diode, its tuning range and its frequency modulation properties. The line width of the diode laser, determined with high resolution Doppler free two photon spectroscopy, was 4 MHz without applying any active stabilization techniques. For time scales below 5 μs the line width drops below 2 MHz.

arXiv:physics/0410256•Laser Physics Letters•Nov 3, 2004•37 citations

778.1 nm distributed feedback lasers for Rb two-photon atomic systems with sub-4 kHz linewidths

Eugenio Di Gaetano, Brendan Keliehor, Kevin Francis Gallacher +4 more

A new epitaxial layer design with a double mode expander layer, high refractive index claddings, and an aluminum-free active area has been used to demonstrate distributed feedback lasers operating at 778.1 nm wavelength with reduced Lorentzian linewidth aimed at miniature atomic clock applications. The design also reduces the vertical beam divergence to improve the modal matching with optical fibers as well as maintain the high power output and reduce the emission linewidth. The lasers demonstrate single-mode operation with an over 35 dB side-mode suppression ratio, a power output ≤58 mW, a coupling efficiency to tapered fibers ≤40%, and a Lorentzian linewidth of 3.7 kHz. The performance allowed the free-running distributed feedback lasers to demonstrate spectroscopy of Rb vapor, which resolved the 85Rb and 87Rb two-photon transitions.

APL Photonics•May 1, 2024•12 citations

Two-photon spectroscopy of rubidium using a grating-feedback diode laser

Abraham J. Olson, Evan J. Carlson, Shannon K. Mayer

We describe an experiment for investigating the 5S1∕2→5D5∕2 two-photon transition in rubidium using a single grating-feedback diode laser operating at 778.1nm (385THz). Continuous tuning of the laser frequency over 4GHz allows for the clear resolution of the Doppler-free spectral features and allows accurate measurement of the hyperfine ground-state splitting. A direct comparison between Doppler-broadened and Doppler-free spectral features is possible because both are distinctly evident in the two-photon spectra. By independently modifying the polarization state of the two laser fields, the impact of electric dipole selection rules on the two-photon transition spectra is investigated. This experiment is a valuable addition to the advanced undergraduate laboratory because it uses much of the same equipment as the single-photon saturated absorption spectroscopy experiment performed on the 5S1∕2→5P3∕2 transition in rubidium (λ=780.24nm) and provides students with an opportunity to investigate characteristics of atomic spectra not evident in the single-photon experiment.

American Journal of Physics•Feb 14, 2006•54 citations

Narrow Linewidth Distributed Feedback Diode Lasers for Cooling in Cold Atom Systems

Scott Watson, Eugenio Di Gaetano, Euan J. McBrearty +2 more

Distributed feedback (DFB) lasers have been realized emitting at a wavelength of 780.24 nm which demonstrate powers in excess of 60 mW with 612 kHz linewidth for use in rubidium (87Rb) cold atom systems.

Conference on Lasers and Electro-Optics•Jan 1, 2020•2 citations

Development of an external cavity diode laser for application to spectroscopy and laser cooling and trapping of rubidium

G. N. Botha

In the presented study a diode laser was characterised and used for spec- troscopy, measuring the resonance lines of atomic rubidium. The characteristics of diode lasers and external cavity diode lasers (ECDL) for the purposes of ab- sorption spectroscopy were investigated and an experimental setup for tunable diode laser spectroscopy using an ECDL was developed. In external cavity diode lasers, the advantages of low cost, small size and e ciency of a diode laser is combined with tunability and a narrow frequency bandwidth. The ECDL was applied in experimental setups for absorption spectroscopy and saturated ab- sorption spectroscopy. Measurement of the absorption of atomic rubidium's D2 line near 780 nm is discussed. The Doppler broadened, as well as the Doppler free spectrum of the ne and hyper ne structure of the D2 line were measured and is discussed. Finer control of the ECDL's stability and frequency, using a servo circuit, were investigated and tested. An overview is given of laser cool- ing and trapping of neutral rubidium atoms, which is the main application the ECDL were developed for.

•Mar 1, 2009•0 citations

Frequency-modulation spectroscopy of rubidium atoms with an AlGaAs diode laser

Shunsuke Nakanishi, H. Ariki, Hiroshi Itoh +1 more

Frequency-modulation (FM) spectroscopy has been performed on the D(2) transitions of rubidium atoms with an AlGaAs diode laser at 780 nm. Doppler-broadened hyperfine-structure transitions of (85)Rb and (87)Rb were resolved with no residual amplitude-modulation-induced background signal by modulating the injection current of the laser diode at a low frequency (20-50 MHz) compared with the Doppler width. To obtain Doppler-free spectra, we combined FM spectroscopy with saturation spectroscopy. The results show that the FM spectroscopy technique is sensitive and should be useful for high-resolution spectroscopy, although the resolution was instrument limited and unusual double peaks were observed.

Optics Letters•Nov 1, 1987•10 citations
Distributed feedback (DFB) laser chips have recently become available at wavelengths that match the D1 and D2 resonance transitions of alkaline atoms. We investigated the spectral properties, tuning characteristics and modulation behavior of continuous wave, single-mode DFB diodes at 778-780 nm and performed high-resolution spectroscopy of Rubidium vapor. The mode-hop free tuning range of the DFB diodes was as large as 2.4 nm (1186 GHz). The line width of the laser diodes was examined both with a heterodyne beat experiment and with high-resolution Doppler-free two photon spectroscopy, yielding a half width of 2-2.5 MHz. The saturation spectra of the D2-line of 85Rb and 87Rb were recorded with a resolution close to the natural line width. The emission frequency was actively stabilized to Doppler-free transitions with a relative accuracy of better than 4 parts in 109 using commercially available servo devices only. The output power of 80 mW was sufficient to allow for two photon spectroscopy of the 5S-5D-transition of 87Rb. We conclude that the performance of the DFB laser equals that of grating-stabilized external-cavity diode lasers (ECDLs), without the mechanical complexity of the latter systems. The DFB diode is thus well-suited to high-resolution applications in alkaline spectroscopy, including laser cooling and optical manipulation of ultra-cold atoms.
We have performed high resolution spectroscopy of rubidium with a single mode continuous wave distributed feedback (DFB) laser diode. The saturation spectrum of the D 2 -line of 85 Rb and 87 Rb was recorded with a resolution close to the natural line width. The emission frequency was actively stabilized to Doppler-free transitions with a relative accuracy of better than 7 parts in 10 9 using commercially available servo devices only. An output power of 80 mW was sufficient to allow for two-photon spectroscopy of the 5S-5D-transition of 87 Rb. Further, we report on the spectral properties of the DFB diode, its tuning range and its frequency modulation properties. The line width of the diode laser, determined with high resolution Doppler free two photon spectroscopy, was 4 MHz without applying any active stabilization techniques. For time scales below 5 μs the line width drops below 2 MHz.
A new epitaxial layer design with a double mode expander layer, high refractive index claddings, and an aluminum-free active area has been used to demonstrate distributed feedback lasers operating at 778.1 nm wavelength with reduced Lorentzian linewidth aimed at miniature atomic clock applications. The design also reduces the vertical beam divergence to improve the modal matching with optical fibers as well as maintain the high power output and reduce the emission linewidth. The lasers demonstrate single-mode operation with an over 35 dB side-mode suppression ratio, a power output ≤58 mW, a coupling efficiency to tapered fibers ≤40%, and a Lorentzian linewidth of 3.7 kHz. The performance allowed the free-running distributed feedback lasers to demonstrate spectroscopy of Rb vapor, which resolved the 85Rb and 87Rb two-photon transitions.
We describe an experiment for investigating the 5S1∕2→5D5∕2 two-photon transition in rubidium using a single grating-feedback diode laser operating at 778.1nm (385THz). Continuous tuning of the laser frequency over 4GHz allows for the clear resolution of the Doppler-free spectral features and allows accurate measurement of the hyperfine ground-state splitting. A direct comparison between Doppler-broadened and Doppler-free spectral features is possible because both are distinctly evident in the two-photon spectra. By independently modifying the polarization state of the two laser fields, the impact of electric dipole selection rules on the two-photon transition spectra is investigated. This experiment is a valuable addition to the advanced undergraduate laboratory because it uses much of the same equipment as the single-photon saturated absorption spectroscopy experiment performed on the 5S1∕2→5P3∕2 transition in rubidium (λ=780.24nm) and provides students with an opportunity to investigate characteristics of atomic spectra not evident in the single-photon experiment.
In the presented study a diode laser was characterised and used for spec- troscopy, measuring the resonance lines of atomic rubidium. The characteristics of diode lasers and external cavity diode lasers (ECDL) for the purposes of ab- sorption spectroscopy were investigated and an experimental setup for tunable diode laser spectroscopy using an ECDL was developed. In external cavity diode lasers, the advantages of low cost, small size and e ciency of a diode laser is combined with tunability and a narrow frequency bandwidth. The ECDL was applied in experimental setups for absorption spectroscopy and saturated ab- sorption spectroscopy. Measurement of the absorption of atomic rubidium's D2 line near 780 nm is discussed. The Doppler broadened, as well as the Doppler free spectrum of the ne and hyper ne structure of the D2 line were measured and is discussed. Finer control of the ECDL's stability and frequency, using a servo circuit, were investigated and tested. An overview is given of laser cool- ing and trapping of neutral rubidium atoms, which is the main application the ECDL were developed for.
Frequency-modulation (FM) spectroscopy has been performed on the D(2) transitions of rubidium atoms with an AlGaAs diode laser at 780 nm. Doppler-broadened hyperfine-structure transitions of (85)Rb and (87)Rb were resolved with no residual amplitude-modulation-induced background signal by modulating the injection current of the laser diode at a low frequency (20-50 MHz) compared with the Doppler width. To obtain Doppler-free spectra, we combined FM spectroscopy with saturation spectroscopy. The results show that the FM spectroscopy technique is sensitive and should be useful for high-resolution spectroscopy, although the resolution was instrument limited and unusual double peaks were observed.