Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

npj Quantum Information

Surface loss calculations and design of a superconducting transmon qubit with tapered wiring

John M. Martinis

Published Mar 7, 2022• 27 citations
Publisher

Abstract

Abstract Analytical formulas are presented for simplified but useful qubit geometries that predict surface dielectric loss when its thickness is much less than the metal thickness, the limiting case needed for real devices. These formulas can thus be used to precisely predict loss and optimize the qubit layout. Surprisingly, a significant fraction of surface loss comes from the small wire that connects the Josephson junction to the qubit capacitor. Tapering this wire is shown to significantly lower its loss. Also predicted are the size and density of the two-level state (TLS) spectrum from individual surface dissipation sites.

DOI
10.1038/s41534-022-00530-6

Related papers

Optimal design of a superconducting transmon qubit with tapered wiring

John M. Martinis

Analytical formulas are presented for simplified but useful qubit geometries that predict surface dielectric loss when its thickness is much less than the metal thickness, the limiting case needed for real devices. These formulas can thus be used to precisely predict loss and optimize the qubit layout. Surprisingly, a significant fraction of surface loss comes from the small wire that connects the Josephson junction to the qubit capacitor. Tapering this wire is shown to significantly lower its loss. Also predicted are the size and density of the two-level state (TLS) spectrum from individual surface dissipation sites.

arXiv:2104.01544•Apr 4, 2021•4 citations

Wiring surface loss of a superconducting transmon qubit

Nikita S. Smirnov, Elizaveta A. Krivko, Anastasiya A. Solovyova +2 more

Quantum processors using superconducting qubits suffer from dielectric loss leading to noise and dissipation. Qubits are usually designed as large capacitor pads connected to a non-linear Josephson junction (or SQUID) by a superconducting thin metal wiring. Here, we report on finite-element simulation and experimental results confirming that more than 50% of surface loss in transmon qubits can originate from Josephson junctions wiring and can limit qubit relaxation time. We experimentally extracted dielectric loss tangents of qubit elements and showed that dominant surface loss of wiring can occur for real qubits designs. Finally, we experimentally demonstrate up to 20% improvement in qubit quality factor by wiring design optimization.

arXiv:2311.16794•Scientific Reports•Mar 27, 2024•18 citations

Shape optimization of superconducting transmon qubits for low surface dielectric loss

Sungjun Eun, Seong Hyeon Park, Kyungsik Seo +2 more

Abstract Surface dielectric loss from superconducting transmon qubits is believed to be one of the dominant sources of decoherence. Reducing surface dielectric loss is crucial for achieving a high quality factor and a long relaxation time (T 1), which can be engineered by carefully changing the geometry of a transmon. In this paper, we present a shape-optimization approach to reduce surface dielectric loss in a transmon qubit. The capacitor pads and junction wires of transmons are shaped as spline curves and optimized through the finite-element method and a global optimization algorithm. We find that the participation ratio of capacitor pads and junction wires can be reduced by 15 % − 18 % and 22 % − 26 % compared to previous designs, while the overall footprint and anharmonicity are maintained at acceptable values. As a result, the two-level system-limited quality factor and the corresponding T 1 were increased by 21.6%.

arXiv:2211.14159•Journal of Physics D Applied Physics•Sep 8, 2023•12 citations

Suppressing the Dielectric Loss in Superconducting Qubits through Useful Geometry Design

Haoran He, Weilong Wang, Fudong Liu +2 more

Dielectric loss from different interfacial layers in the superconducting circuit and from external environment may cause superconducting qubit decoherence. Compared to modeling the entire device at once with a numerical solver, quantitatively formulating the dielectric loss can both describe all loss mechanisms and make the optimization more transparent. In this paper, we first analyze the expression formula of dielectric loss, and obtain a design scheme that can reduce the dielectric loss of qubits. That is, we replace the straight junction wires with the tapered junction wires. Based on this scheme, we perform a simulation to optimize the design of junction wires. Finally, a real experiment is conducted to verify our design. The results show that both the T1 time and T2 time of qubits are significantly improved.

Entropy•Jul 8, 2022•9 citations

Geometric Limits of Surface Loss in Transmon Wiring: Analytical Framework and Design Rules

A. R Hossain, Tanu Arefin

Dielectric surface loss from junction wiring represents a critical secondary limit for superconducting transmon coherence. We present a quasi-one-dimensional analytical framework to minimise this loss, enabling rapid optimisation without computationally expensive 3D simulations. We compare uniform strips (V1) against linear (V2–V3) and optimised hybrid tapers (V4–V5). We demonstrate that geometric tapering suppresses wiring participation by up to 99.6%, reducing it from 0.0756 ppm (V1) to 0.0003 ppm (V4). Crucially, however, a simple linear taper (T1 ≈ 127.306 μs) yields coherence virtually indistinguishable from theoretically optimal complex profiles (T1 ≈ 127.323 μs) in the current pad-dominated regime. We thus establish a definitive design rule: standard linear tapering is sufficient to eliminate wiring loss as a bottleneck, rendering fabrication-sensitive complex shapes unnecessary for next-generation, low-loss devices.

•Apr 22, 2026•0 citations

Compact vacuum gap transmon qubits: Selective and sensitive probes for superconductor surface losses

Martin Žemlička, Elena S. Redchenko, Matilda Peruzzo +4 more

State-of-the-art transmon qubits rely on large capacitors which systematically improves their coherence due to reduced surface loss participation. However, this approach increases both the footprint and the parasitic cross-coupling and is ultimately limited by radiation losses - a potential roadblock for scaling up quantum processors to millions of qubits. In this work we present transmon qubits with sizes as low as 36$ \times $39$ μ$m$^2$ with $\gtrsim$100 nm wide vacuum gap capacitors that are micro-machined from commercial silicon-on-insulator wafers and shadow evaporated with aluminum. After the release in HF vapor we achieve a vacuum participation ratio up to 99.6\% in an in-plane design that is compatible with standard coplanar circuits. Qubit relaxation time measurements for small gaps with high vacuum electric fields of up to 22 V/m reveal a double exponential decay indicating comparably strong coupling to long-lived two-level-systems (TLS). The exceptionally high selectivity of $>$20 dB to the superconductor-vacuum surface allows to precisely back out the sub-single-photon dielectric loss tangent of aluminum oxide exposed to ambient conditions. In terms of future scaling potential we achieve a qubit quality factor by footprint area of $20 μ\mathrm{s}^{-2}$, which is on par with the highest $T_1$ devices relying on larger geometries and expected to improve substantially for lower loss superconductors like NbTiN, TiN or Ta.

arXiv:2206.14104•Jun 28, 2022•0 citations
Abstract Analytical formulas are presented for simplified but useful qubit geometries that predict surface dielectric loss when its thickness is much less than the metal thickness, the limiting case needed for real devices. These formulas can thus be used to precisely predict loss and optimize the qubit layout. Surprisingly, a significant fraction of surface loss comes from the small wire that connects the Josephson junction to the qubit capacitor. Tapering this wire is shown to significantly lower its loss. Also predicted are the size and density of the two-level state (TLS) spectrum from individual surface dissipation sites.
Analytical formulas are presented for simplified but useful qubit geometries that predict surface dielectric loss when its thickness is much less than the metal thickness, the limiting case needed for real devices. These formulas can thus be used to precisely predict loss and optimize the qubit layout. Surprisingly, a significant fraction of surface loss comes from the small wire that connects the Josephson junction to the qubit capacitor. Tapering this wire is shown to significantly lower its loss. Also predicted are the size and density of the two-level state (TLS) spectrum from individual surface dissipation sites.
Quantum processors using superconducting qubits suffer from dielectric loss leading to noise and dissipation. Qubits are usually designed as large capacitor pads connected to a non-linear Josephson junction (or SQUID) by a superconducting thin metal wiring. Here, we report on finite-element simulation and experimental results confirming that more than 50% of surface loss in transmon qubits can originate from Josephson junctions wiring and can limit qubit relaxation time. We experimentally extracted dielectric loss tangents of qubit elements and showed that dominant surface loss of wiring can occur for real qubits designs. Finally, we experimentally demonstrate up to 20% improvement in qubit quality factor by wiring design optimization.
Abstract Surface dielectric loss from superconducting transmon qubits is believed to be one of the dominant sources of decoherence. Reducing surface dielectric loss is crucial for achieving a high quality factor and a long relaxation time (T 1), which can be engineered by carefully changing the geometry of a transmon. In this paper, we present a shape-optimization approach to reduce surface dielectric loss in a transmon qubit. The capacitor pads and junction wires of transmons are shaped as spline curves and optimized through the finite-element method and a global optimization algorithm. We find that the participation ratio of capacitor pads and junction wires can be reduced by 15 % − 18 % and 22 % − 26 % compared to previous designs, while the overall footprint and anharmonicity are maintained at acceptable values. As a result, the two-level system-limited quality factor and the corresponding T 1 were increased by 21.6%.
Dielectric loss from different interfacial layers in the superconducting circuit and from external environment may cause superconducting qubit decoherence. Compared to modeling the entire device at once with a numerical solver, quantitatively formulating the dielectric loss can both describe all loss mechanisms and make the optimization more transparent. In this paper, we first analyze the expression formula of dielectric loss, and obtain a design scheme that can reduce the dielectric loss of qubits. That is, we replace the straight junction wires with the tapered junction wires. Based on this scheme, we perform a simulation to optimize the design of junction wires. Finally, a real experiment is conducted to verify our design. The results show that both the T1 time and T2 time of qubits are significantly improved.
Dielectric surface loss from junction wiring represents a critical secondary limit for superconducting transmon coherence. We present a quasi-one-dimensional analytical framework to minimise this loss, enabling rapid optimisation without computationally expensive 3D simulations. We compare uniform strips (V1) against linear (V2–V3) and optimised hybrid tapers (V4–V5). We demonstrate that geometric tapering suppresses wiring participation by up to 99.6%, reducing it from 0.0756 ppm (V1) to 0.0003 ppm (V4). Crucially, however, a simple linear taper (T1 ≈ 127.306 μs) yields coherence virtually indistinguishable from theoretically optimal complex profiles (T1 ≈ 127.323 μs) in the current pad-dominated regime. We thus establish a definitive design rule: standard linear tapering is sufficient to eliminate wiring loss as a bottleneck, rendering fabrication-sensitive complex shapes unnecessary for next-generation, low-loss devices.
State-of-the-art transmon qubits rely on large capacitors which systematically improves their coherence due to reduced surface loss participation. However, this approach increases both the footprint and the parasitic cross-coupling and is ultimately limited by radiation losses - a potential roadblock for scaling up quantum processors to millions of qubits. In this work we present transmon qubits with sizes as low as 36$ \times 393939 μmmm^2$ with $\gtrsim$100 nm wide vacuum gap capacitors that are micro-machined from commercial silicon-on-insulator wafers and shadow evaporated with aluminum. After the release in HF vapor we achieve a vacuum participation ratio up to 99.6\% in an in-plane design that is compatible with standard coplanar circuits. Qubit relaxation time measurements for small gaps with high vacuum electric fields of up to 22 V/m reveal a double exponential decay indicating comparably strong coupling to long-lived two-level-systems (TLS). The exceptionally high selectivity of $>$20 dB to the superconductor-vacuum surface allows to precisely back out the sub-single-photon dielectric loss tangent of aluminum oxide exposed to ambient conditions. In terms of future scaling potential we achieve a qubit quality factor by footprint area of 20μs−220 μ\mathrm{s}^{-2}20μs−2, which is on par with the highest T1T_1T1​ devices relying on larger geometries and expected to improve substantially for lower loss superconductors like NbTiN, TiN or Ta.