Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optical and Quantum Sensing and Precision Metrology II

A wavelength reference at 1560 nm using a photonic rubidium spectrometer and aluminum nitride microresonator frequency doubler (Conference Presentation)

Casey McKenna, Douglas G. Bopp, Zach L. Newman, Joshua B. Surya, Alexander Yulaev, Daron Westly, Kartik A. Srinivasan, Vladimir Aksyuk, Hong X. Tang, John E. Kitching, Matthew T. Hummon

Published Mar 9, 2020• 0 citations
Publisher

Abstract

Wavelength references in the telecom spectrum have applications in communications and dimensional metrology. However, they typically consist of bulk optics and vapor cells. Photonic integration of these components may lead to low cost, portable devices. Here we demonstrate the incorporation of a photonic Rb spectrometer with an AlN microresonator frequency doubler. Light at 1560 nm is coupled onto a chip containing the AlN microresonator frequency doubler. The resulting 780 nm light is sent to the photonic Rb spectrometer, which consists of an apodized grating beam expander and microfabricated MEMS vapor cell. We perform Doppler broadened spectroscopy of the D2 line and demonstrate preliminary laser stabilization to these features.

DOI
10.1117/12.2546429

Related papers

A dual beam photonic wavelength refernce

Matthew T. Hummon, Douglas G. Bopp, Jesse Kruse +5 more

We present operation of a photonically integrated wavelength reference at 780 nm using a dual beam geometry. The dual beams are generated by a pair of extreme mode converting grating beam expanders that generate a pair of overlapped, counter-propagating beams inside the volume of a microfabricated vapor cell. We perform spectroscopy of rubidium and a characterize the stability of laser locked to a sub-Doppler transition at 780 nm. By stabilizing the laser to a known transition in an atomic vapor, this device can serve as a quantum wavelength reference. The dual beam geometry also enables investigation of two-photon absorption in a three-level ladder configuration in rubidium using excitation at 780 nm + 776 nm.

Measurement Sensors•Sep 28, 2021•2 citations

Photonic chip for laser stabilization to an atomic vapor with 10−11 instability

Matthew T. Hummon, Songbai Kang, Douglas G. Bopp +8 more

Devices based on spectroscopy of atomic vapors can measure physical quantities such as magnetic fields, RF electric fields, time and length, and rotation and have applications in a broad range of fields including communications, medicine, and navigation. We present a type of photonic device that interfaces single-mode silicon nitride optical waveguides with warm atomic vapors, enabling precision spectroscopy in an extremely compact (<1  cm3) package. We perform precision spectroscopy of rubidium confined in a micro-machined, 27  mm3 volume, vapor cell using a collimated free-space 120 μm diameter laser beam derived directly from a single-mode silicon nitride waveguide. With this optical-fiber integrated photonic spectrometer, we demonstrate an optical frequency reference at 780 nm with a stability of 10−11 from 1 to 104  s. This device harnesses the benefits of both photonic integration and precision spectroscopy for the next generation of quantum sensors and devices based on atomic vapors.

Optica•Apr 10, 2018•167 citations

Short-term stability of a microcell optical reference based on Rb atom two-photon transition at 778 nm

Martin Callejo, Andrei Mursa, Rémy Vicarini +5 more

We report on the development and short-term stability characterization of an optical frequency reference based on the spectroscopy of the rubidium two-photon transition at 778 nm in a microfabricated vapor cell. When compared against a 778 nm reference signal extracted from a frequency-doubled cavity-stabilized telecom laser, the short-term stability of the microcell frequency standard is 3.5 $\times$ 10$^{-13}$ $τ^{-1/2}$ until 200~s, in good agreement with a phase noise level of $+$ 43 dBrad$^2$/Hz at 1~Hz offset frequency. The two main contributions to the short-term stability of the microcell reference are currently the photon shot noise and the intermodulation effect induced by the laser frequency noise. With still a relevant margin of progress, these results show the interest of this spectroscopic approach for the demonstration of high-stability miniaturized optical vapor cell clocks. Such clocks are poised to be highly beneficial for applications in navigation, communications, and metrology.

arXiv:2407.00841•Jun 30, 2024•0 citations

Short-term stability of a microcell optical reference based on the Rb atom two-photon transition at 778 nm

Martin Callejo, Andrei Mursa, Rémy Vicarini +5 more

We report on the development and short-term stability characterization of an optical frequency reference based on the spectroscopy of the rubidium two-photon transition at 778 nm in a microfabricated vapor cell. When compared against a 778 nm reference signal extracted from a frequency-doubled cavity-stabilized telecom laser, the short-term stability of the microcell frequency standard is 3.5×10−13τ−1/2 until 200 s, in good agreement with a phase noise level of +43dBrad2/Hz at 1 Hz offset frequency. The two main contributions to the short-term stability of the microcell reference are currently the photon shot noise and the intermodulation effect induced by the laser frequency noise. Retaining a relevant margin of progress, these results show the interest of this spectroscopic approach for the demonstration of high-stability miniaturized optical vapor cell clocks. Such clocks are poised to be highly beneficial for applications in navigation, communications, and metrology.

Journal of the Optical Society of America B•Nov 22, 2024•14 citations

Atomic spectroscopy and laser frequency stabilization with scalable micrometer and sub-micrometer vapor cells

Eliran Talker, Roy Zektzer, Yefim Barash +2 more

We report on the atomic spectroscopy and laser frequency stabilization using a new type of a miniaturized glass vapor cell with a scalable thickness varying from 500 nm up to 8 μm. The cell is fabricated by lithography and etching techniques in a Pyrex glass substrate, followed by anodic bonding. It is filled with rubidium vapor using a distillation procedure. This simple and cost-effective fabrication method provides an attractive and compact solution for atomic cells, with applications in quantum metrology, sensing, communication, and light-vapor manipulations at the subwavelength scale. Using the fabricated cell, we have performed fluorescence and transmission spectroscopy of the Rubidium D2 line and observed sub-Doppler broadened lines. As an example, for a potential application, we have used the fabricated cell to demonstrate the stabilization of a 780 nm diode laser to the level about 10−10 in fractional frequency.

Journal of Vacuum Science & Technology B Nanotechnology and Microelectronics Materials Processing Measurement and Phenomena•Aug 26, 2020•15 citations

Microfabricated saturated absorption laser spectrometer

Svenja A. Knappe, H. G. Robinson, Leo W. Hollberg

We demonstrate a miniature microfabricated saturated absorption laser spectrometer. The system consists of miniature optics, a microfabricated Rb vapor cell, heaters, and a photodetector, all contained within a volume of 0.1 cm(3). Saturated absorption spectra were measured with a diode laser at 795 nm. They are comparable to signals obtained with standard table-top setups, although the rubidium vapor cell has an interior volume of only 1 mm(3). We discuss the performance and prospects for using such systems as a miniature optical wavelength reference, compatible with transportable instruments.

Optics Express•Jan 1, 2007•50 citations
Wavelength references in the telecom spectrum have applications in communications and dimensional metrology. However, they typically consist of bulk optics and vapor cells. Photonic integration of these components may lead to low cost, portable devices. Here we demonstrate the incorporation of a photonic Rb spectrometer with an AlN microresonator frequency doubler. Light at 1560 nm is coupled onto a chip containing the AlN microresonator frequency doubler. The resulting 780 nm light is sent to the photonic Rb spectrometer, which consists of an apodized grating beam expander and microfabricated MEMS vapor cell. We perform Doppler broadened spectroscopy of the D2 line and demonstrate preliminary laser stabilization to these features.
We present operation of a photonically integrated wavelength reference at 780 nm using a dual beam geometry. The dual beams are generated by a pair of extreme mode converting grating beam expanders that generate a pair of overlapped, counter-propagating beams inside the volume of a microfabricated vapor cell. We perform spectroscopy of rubidium and a characterize the stability of laser locked to a sub-Doppler transition at 780 nm. By stabilizing the laser to a known transition in an atomic vapor, this device can serve as a quantum wavelength reference. The dual beam geometry also enables investigation of two-photon absorption in a three-level ladder configuration in rubidium using excitation at 780 nm + 776 nm.
Devices based on spectroscopy of atomic vapors can measure physical quantities such as magnetic fields, RF electric fields, time and length, and rotation and have applications in a broad range of fields including communications, medicine, and navigation. We present a type of photonic device that interfaces single-mode silicon nitride optical waveguides with warm atomic vapors, enabling precision spectroscopy in an extremely compact (<1  cm3) package. We perform precision spectroscopy of rubidium confined in a micro-machined, 27  mm3 volume, vapor cell using a collimated free-space 120 μm diameter laser beam derived directly from a single-mode silicon nitride waveguide. With this optical-fiber integrated photonic spectrometer, we demonstrate an optical frequency reference at 780 nm with a stability of 10−11 from 1 to 104  s. This device harnesses the benefits of both photonic integration and precision spectroscopy for the next generation of quantum sensors and devices based on atomic vapors.
We report on the development and short-term stability characterization of an optical frequency reference based on the spectroscopy of the rubidium two-photon transition at 778 nm in a microfabricated vapor cell. When compared against a 778 nm reference signal extracted from a frequency-doubled cavity-stabilized telecom laser, the short-term stability of the microcell frequency standard is 3.5 ×\times× 10−13^{-13}−13 τ−1/2τ^{-1/2}τ−1/2 until 200~s, in good agreement with a phase noise level of +++ 43 dBrad2^22/Hz at 1~Hz offset frequency. The two main contributions to the short-term stability of the microcell reference are currently the photon shot noise and the intermodulation effect induced by the laser frequency noise. With still a relevant margin of progress, these results show the interest of this spectroscopic approach for the demonstration of high-stability miniaturized optical vapor cell clocks. Such clocks are poised to be highly beneficial for applications in navigation, communications, and metrology.
We report on the development and short-term stability characterization of an optical frequency reference based on the spectroscopy of the rubidium two-photon transition at 778 nm in a microfabricated vapor cell. When compared against a 778 nm reference signal extracted from a frequency-doubled cavity-stabilized telecom laser, the short-term stability of the microcell frequency standard is 3.5×10−13τ−1/2 until 200 s, in good agreement with a phase noise level of +43dBrad2/Hz at 1 Hz offset frequency. The two main contributions to the short-term stability of the microcell reference are currently the photon shot noise and the intermodulation effect induced by the laser frequency noise. Retaining a relevant margin of progress, these results show the interest of this spectroscopic approach for the demonstration of high-stability miniaturized optical vapor cell clocks. Such clocks are poised to be highly beneficial for applications in navigation, communications, and metrology.
We report on the atomic spectroscopy and laser frequency stabilization using a new type of a miniaturized glass vapor cell with a scalable thickness varying from 500 nm up to 8 μm. The cell is fabricated by lithography and etching techniques in a Pyrex glass substrate, followed by anodic bonding. It is filled with rubidium vapor using a distillation procedure. This simple and cost-effective fabrication method provides an attractive and compact solution for atomic cells, with applications in quantum metrology, sensing, communication, and light-vapor manipulations at the subwavelength scale. Using the fabricated cell, we have performed fluorescence and transmission spectroscopy of the Rubidium D2 line and observed sub-Doppler broadened lines. As an example, for a potential application, we have used the fabricated cell to demonstrate the stabilization of a 780 nm diode laser to the level about 10−10 in fractional frequency.
We demonstrate a miniature microfabricated saturated absorption laser spectrometer. The system consists of miniature optics, a microfabricated Rb vapor cell, heaters, and a photodetector, all contained within a volume of 0.1 cm(3). Saturated absorption spectra were measured with a diode laser at 795 nm. They are comparable to signals obtained with standard table-top setups, although the rubidium vapor cell has an interior volume of only 1 mm(3). We discuss the performance and prospects for using such systems as a miniature optical wavelength reference, compatible with transportable instruments.