Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEICE Technical Report; IEICE Tech. Rep.

Design of Low-latency SFQ Up/Down Counter for Digital Signal Processing

Kamiya Ryotaro, Masato Naruse, Taino Tohru, Myoren Hiroaki

Published Aug 2, 2017• 0 citations
OpenAlex

Related papers

Challenges in the Realization of SFQ Digital Circuits

T. Van Duzer

Springer eBooks•Jan 1, 1999•0 citations

SFQ Multiplexed Signal Processing Circuits for STJ Photon Detector Arrays

Hiroaki Myoren, Yu Yoshizawa, Tohru Taino

We have been studying single flux quantum (SFQ) digital signal processing (DSP) circuits for superconducting tunnel junction (STJ) photon detector arrays. The proposed DSP circuit consists of a binary tree of multiplexers, a time counter, a binary counter, and a readout memory. Each multiplexer was designed such that the first arriving SFQ pulse train connects to the binary counter until the time counter reaches a set value. The time counter is set to a sufficiently long time compared with the response time of STJ photon detector. After processing the multiplexer, SFQ pulses are integrated by the binary counter. The number of integrated SFQ pulses is proportional to the number of quasi-particles generated by photon irradiation in an STJ. After the time counter reaches the set value, the time counter generates a set SFQ pulse to set the multiplexer in the ready state, the integrated value is sent to the readout memory and then the binary counter is reset. The binary tree of multiplexers could be extended to have address bits for photon imaging using an STJ array. One key component of the proposed DSP circuit was fabricated and its operation using an on-chip clock generator was successfully demonstrated.

IEEE Transactions on Applied Superconductivity•Jun 1, 2009•4 citations

Single flux quantum one-decimal-digit RNS adder

Nada Vukovic, M. J. Feldman

Residue number system (RNS) arithmetic has a promising role for fault-tolerant high throughput superconducting single flux quantum (SFQ) circuits for digital signal processing (DSP) applications. We have designed one of the basic computational blocks used in DSP circuits, one-decimal-digit RNS adder. A new design for its main component, the single-modulus adder, has been developed. It combines simple and robust RSFQ elementary cells, both combinational and sequential. The central units are a circular shift register, a code converter, and the clock control circuitry. Our mod5 adder employs 195 Josephson junctions, consumes 50 μW of power, and occupies an area of less than 2 mm2. Chips were fabricated at HYPRES, Inc. using 1 kA/cm2 low-Tc Niobium technology. The mod5 adder was successfully tested at low speed, and gave experimental bias margins of ±26%.

Applied Superconductivity•Oct 1, 1999•1 citation

Quantitative evaluation of timing jitter for SFQ circuits

Terabe Masayoshi, Sekiya Akito, Fujimaki Akira

IEICE Technical Report; IEICE Tech. Rep.•Oct 7, 2005•0 citations

Design and Demonstration of Pipelined Circuits Using SFQ Logic

A. Akahori, Sekiya Akito, Takahiro Yamada +2 more

IEICE Transactions on Electronics•Mar 1, 2002•1 citation

20 ${\hbox{kA/cm}}^{2}$ Process Development for Superconducting Integrated Circuits With 80 GHz Clock Frequency

Sergey K. Tolpygo, Daniel T. Yohannes, R. T. Hunt +4 more

Results of the development of an advanced fabrication process for superconductor integrated circuits (ICs) with 20 kA/cm2Nb/AlOx/Nb Josephson junctions is presented. The process has 4 niobium superconducting layers, one MoNxresistor layer with 4.0 Ohm per square sheet resistance for the junction shunting and circuit biasing, and employs circular Josephson junctions with the minimum diameter of 1 mum; total 11 photolithography levels. The goal of this process development is the demonstration of the feasibility of 80 GHz clock speeds in superconducting ICs for digital signal processing (DSP) and high performance computing. Basic components of rapid single flux quantum (RSFQ) logic such as DC/SFQ, SFQ/DC converters, Josephson transmission lines (JTLs), and simple digital circuits such as T-flip-flops and 4-bit digital counters have been fabricated and tested. The T-flip-flops were shown to operate up to 400 GHz with the widest margin of operation of plusmn13% at 325 GHz. Digital testing results on the 4-bit counters as well as the junctions, resistors, and other process parameters are also presented. Prospects for yet higher speeds and very large scale integration are discussed.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•73 citations
We have been studying single flux quantum (SFQ) digital signal processing (DSP) circuits for superconducting tunnel junction (STJ) photon detector arrays. The proposed DSP circuit consists of a binary tree of multiplexers, a time counter, a binary counter, and a readout memory. Each multiplexer was designed such that the first arriving SFQ pulse train connects to the binary counter until the time counter reaches a set value. The time counter is set to a sufficiently long time compared with the response time of STJ photon detector. After processing the multiplexer, SFQ pulses are integrated by the binary counter. The number of integrated SFQ pulses is proportional to the number of quasi-particles generated by photon irradiation in an STJ. After the time counter reaches the set value, the time counter generates a set SFQ pulse to set the multiplexer in the ready state, the integrated value is sent to the readout memory and then the binary counter is reset. The binary tree of multiplexers could be extended to have address bits for photon imaging using an STJ array. One key component of the proposed DSP circuit was fabricated and its operation using an on-chip clock generator was successfully demonstrated.
Residue number system (RNS) arithmetic has a promising role for fault-tolerant high throughput superconducting single flux quantum (SFQ) circuits for digital signal processing (DSP) applications. We have designed one of the basic computational blocks used in DSP circuits, one-decimal-digit RNS adder. A new design for its main component, the single-modulus adder, has been developed. It combines simple and robust RSFQ elementary cells, both combinational and sequential. The central units are a circular shift register, a code converter, and the clock control circuitry. Our mod5 adder employs 195 Josephson junctions, consumes 50 μW of power, and occupies an area of less than 2 mm2. Chips were fabricated at HYPRES, Inc. using 1 kA/cm2 low-Tc Niobium technology. The mod5 adder was successfully tested at low speed, and gave experimental bias margins of ±26%.
20 kA/cm2{\hbox{kA/cm}}^{2}kA/cm2 Process Development for Superconducting Integrated Circuits With 80 GHz Clock Frequency
Results of the development of an advanced fabrication process for superconductor integrated circuits (ICs) with 20 kA/cm2Nb/AlOx/Nb Josephson junctions is presented. The process has 4 niobium superconducting layers, one MoNxresistor layer with 4.0 Ohm per square sheet resistance for the junction shunting and circuit biasing, and employs circular Josephson junctions with the minimum diameter of 1 mum; total 11 photolithography levels. The goal of this process development is the demonstration of the feasibility of 80 GHz clock speeds in superconducting ICs for digital signal processing (DSP) and high performance computing. Basic components of rapid single flux quantum (RSFQ) logic such as DC/SFQ, SFQ/DC converters, Josephson transmission lines (JTLs), and simple digital circuits such as T-flip-flops and 4-bit digital counters have been fabricated and tested. The T-flip-flops were shown to operate up to 400 GHz with the widest margin of operation of plusmn13% at 325 GHz. Digital testing results on the 4-bit counters as well as the junctions, resistors, and other process parameters are also presented. Prospects for yet higher speeds and very large scale integration are discussed.