Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

Optical Bistability And Transphasor Action In Semiconductors

David A. B. Miller, C. T. Seaton, Stanley Desmond Smith

Published May 15, 1981• 1 citation
Publisher

Abstract

We report the realisation of optically bistable switching and memory elements, and the transphasor Can all-optical transistor) in simple one element nonlinear Fabry-Perot interferometers made from the semiconductor InSb. These devices, which operate at 5 K and 77 K with mW powers from a cw CO laser between 5 and 6 μm rely on a strongly intensity-dependent refractive index discovered near the bandgap region of InSb and explained by bandgap resonant saturation. Switching speeds are shown to be < 500 ns in these first devices and operation to much shorter timescales is predicted. Operation at room temperature and in other semiconductors at other wavelengths remains a possibility and such devices offer considerable potential for all-optical switching in integrated optics and laser pulse control.

DOI
10.1117/12.959048

Related papers

Optical bistability in semiconductors

David A. B. Miller, S. Smith, C. T. Seaton

Detailed results are presented on optical bistability (OB) and two-beam optical transistor (transphasor) action in simple, one-element Fabry-Perot devices, with the semiconductor InSb using a CW CO laser near the bandgap region, and OB for semiconductors in general is discussed. OB and multistability are seen in transmission and reflection at 5 K. At 77 K,n_{2} \simeq 3 \times 10^{-3}cm2/W [corresponding to an effective\chi^{(3)} \sim 1ESU] is measured and OB is observed at ∼8 mW. Transphasor action at 5 K is presented and the influence of degenerate four-wave mixing is discussed. The basic physics of the microscopic mechanism for n2(bandgap-resonant saturation) is summarized and a simplified, generalized model is derived. This model and arguments on cavity optimization are used to predict order of magnitude limits to switching power, energy, and speed, both in InSb and other semiconductors, even in the absence of excitonic enhancement.

IEEE Journal of Quantum Electronics•Mar 1, 1981•90 citations

Optical bistability and signal amplification in a semiconductor crystal: applications of new low-power nonlinear effects in InSb

David A. B. Miller, Stanley Desmond Smith, A.M. Johnston

We report the observation of optical stability for a plane parallel semiconductor crystal which forms a Fabry-Perot interferometer using only the natural reflectivity of its surfaces. Nonlinear transmission is observed for cw laser intensities above ∼ 100 W/cm2 for radiation at 1895 cm−1 near the energy gap of InSb at 5 K. The effect is interpreted in terms of a very large intensity-dependent refractive index giving a 5λ/2 optical thickness change for an intensity of ∼2 kW/cm2. Clear bistability is seen in fifth-order interference, the first such observation above first order in an intrinsic, one-element system, in addition to regions exhibiting signal amplification. The same crystal also shows strong modulation of the transmission of one laser beam induced by a second, with real signal gain, thus demonstrating an ’’optical transistor.’’

Applied Physics Letters•Nov 1, 1979•310 citations

Optical bistability in InGaAsP amplifiers and implications for passive devices

Wayne F. Sharfin, M. Dagenais

We demonstrate optically bistable (light switching light) operation in a room-temperature InGaAsP Fabry-Perot amplifier. The amplifier is an InGaAsP/InP laser structure biased at ~95% of its lasing threshold. It is switched with <3 μW of optical power provided by the mechanically chopped output of a quasi-single-mode InGaAsP/InP laser. The experimental apparatus is depicted in Fig, 1. A change in the refractive Index in the amplifier of only 5 × 10−4 is sufficient to cause switching. Input and output pulses from the nonlinear amplifier are shown in Fig. 2 when the source frequency is initially detuned by 14 GHz from the closest Fabry-Perot mode of the amplifier. Smaller switching powers are required at lesser detunings. The physical mechanism of the intensity-dependent change of the refractive index is thought to be the change in carrier density resulting from stimulated recombination of free carriers.

Conference on Lasers and Electro-Optics•Jan 1, 1985•0 citations

Optically bistable devices using semiconductor materials

Stanley Desmond Smith, Michael E. Prise, C. T. Seaton +2 more

This report covers work conducted from February 1982 to February 1983 on the nonlinear optical properties of semiconductors using tunable (bandgap resonant) laser sources. Emphasis is on Carbon Monoxide (CO) Indium Antimonides (InSb) at 77K, but an optical parametric amplifier is constructed for future work on systems at shorter wavelengths. The Optical Bistability and device properties of InSb have been investigated. Operation of a slice of InSb, held at 77K, pumped by a continuous wave CO laser, as an optical AND gate, triggered by 30 ps pulses at wavelength 1.06 micron with energies of 5 nJ, is demonstrated. By using temporal separation of the trigger pulses, information on the carrier dynamics is obtained. The design and construction of an angle tuned Optical Parametric Amplifier consisting of a lithium niobate crystal pumped by a 30 ps pulse from a neodymium YAG laser has been achieved.

Final Technical Report•Nov 1, 1984•0 citations

InSb devices: transphasors with high gain, bistable swtiches and sequential logic gates

Andrew Walker, Frank A. P. Tooley, Michael E. Prise +4 more

Abstract InSb etalons operated at 77 K and illuminated by CO lasers (5.5 pm) exhibit continuous wave (c.w.) optical bistability. A wide range of experiments have been performed to further the basic characterization of these devices and to demonstrate their various potential applications. The latter include signal amplification, modulation and, with external switching, the construction of logic gates. Two devices on a single etalon have now been coupled to form a simple all-optical circuit. New results have also been obtained with InSb at room temperature with pulsed CO2 lasers (10.6 pm).

Philosophical Transactions of the Royal Society of London Series A Mathematical and Physical Sciences•Dec 18, 1984•38 citations

Nonlinearities at the Bandgap in InAs

CRAIG D. POOLE, E. Garmire

InSb has been shown to exhibit bistability and a very large nonlinear index.1 A semiconductor which is similiar, but which has a bandgap at shorter wavelengths is InAs. In this talk we present measurements of saturable absorption in InAs using an HF laser, which matches the bandgap of InAs at temperatures from 5° to 100° K. Using these measurements we have calculated a nonlinear refractive index of n2 = 2x10−5 cm2/W for light near but below the bandgap. These numbers are comparable to those measured in InSb and indicate that InAs may be a good material for bistable devices.

Topical Meeting on Optical Bistability (OB)•Jan 1, 1983•1 citation
We report the realisation of optically bistable switching and memory elements, and the transphasor Can all-optical transistor) in simple one element nonlinear Fabry-Perot interferometers made from the semiconductor InSb. These devices, which operate at 5 K and 77 K with mW powers from a cw CO laser between 5 and 6 μm rely on a strongly intensity-dependent refractive index discovered near the bandgap region of InSb and explained by bandgap resonant saturation. Switching speeds are shown to be < 500 ns in these first devices and operation to much shorter timescales is predicted. Operation at room temperature and in other semiconductors at other wavelengths remains a possibility and such devices offer considerable potential for all-optical switching in integrated optics and laser pulse control.
Detailed results are presented on optical bistability (OB) and two-beam optical transistor (transphasor) action in simple, one-element Fabry-Perot devices, with the semiconductor InSb using a CW CO laser near the bandgap region, and OB for semiconductors in general is discussed. OB and multistability are seen in transmission and reflection at 5 K. At 77 K,n_{2} \simeq 3 \times 10^{-3}cm2/W [corresponding to an effective\chi^{(3)} \sim 1ESU] is measured and OB is observed at ∼8 mW. Transphasor action at 5 K is presented and the influence of degenerate four-wave mixing is discussed. The basic physics of the microscopic mechanism for n2(bandgap-resonant saturation) is summarized and a simplified, generalized model is derived. This model and arguments on cavity optimization are used to predict order of magnitude limits to switching power, energy, and speed, both in InSb and other semiconductors, even in the absence of excitonic enhancement.
We report the observation of optical stability for a plane parallel semiconductor crystal which forms a Fabry-Perot interferometer using only the natural reflectivity of its surfaces. Nonlinear transmission is observed for cw laser intensities above ∼ 100 W/cm2 for radiation at 1895 cm−1 near the energy gap of InSb at 5 K. The effect is interpreted in terms of a very large intensity-dependent refractive index giving a 5λ/2 optical thickness change for an intensity of ∼2 kW/cm2. Clear bistability is seen in fifth-order interference, the first such observation above first order in an intrinsic, one-element system, in addition to regions exhibiting signal amplification. The same crystal also shows strong modulation of the transmission of one laser beam induced by a second, with real signal gain, thus demonstrating an ’’optical transistor.’’
We demonstrate optically bistable (light switching light) operation in a room-temperature InGaAsP Fabry-Perot amplifier. The amplifier is an InGaAsP/InP laser structure biased at ~95% of its lasing threshold. It is switched with <3 μW of optical power provided by the mechanically chopped output of a quasi-single-mode InGaAsP/InP laser. The experimental apparatus is depicted in Fig, 1. A change in the refractive Index in the amplifier of only 5 × 10−4 is sufficient to cause switching. Input and output pulses from the nonlinear amplifier are shown in Fig. 2 when the source frequency is initially detuned by 14 GHz from the closest Fabry-Perot mode of the amplifier. Smaller switching powers are required at lesser detunings. The physical mechanism of the intensity-dependent change of the refractive index is thought to be the change in carrier density resulting from stimulated recombination of free carriers.
This report covers work conducted from February 1982 to February 1983 on the nonlinear optical properties of semiconductors using tunable (bandgap resonant) laser sources. Emphasis is on Carbon Monoxide (CO) Indium Antimonides (InSb) at 77K, but an optical parametric amplifier is constructed for future work on systems at shorter wavelengths. The Optical Bistability and device properties of InSb have been investigated. Operation of a slice of InSb, held at 77K, pumped by a continuous wave CO laser, as an optical AND gate, triggered by 30 ps pulses at wavelength 1.06 micron with energies of 5 nJ, is demonstrated. By using temporal separation of the trigger pulses, information on the carrier dynamics is obtained. The design and construction of an angle tuned Optical Parametric Amplifier consisting of a lithium niobate crystal pumped by a 30 ps pulse from a neodymium YAG laser has been achieved.
Abstract InSb etalons operated at 77 K and illuminated by CO lasers (5.5 pm) exhibit continuous wave (c.w.) optical bistability. A wide range of experiments have been performed to further the basic characterization of these devices and to demonstrate their various potential applications. The latter include signal amplification, modulation and, with external switching, the construction of logic gates. Two devices on a single etalon have now been coupled to form a simple all-optical circuit. New results have also been obtained with InSb at room temperature with pulsed CO2 lasers (10.6 pm).
InSb has been shown to exhibit bistability and a very large nonlinear index.1 A semiconductor which is similiar, but which has a bandgap at shorter wavelengths is InAs. In this talk we present measurements of saturable absorption in InAs using an HF laser, which matches the bandgap of InAs at temperatures from 5° to 100° K. Using these measurements we have calculated a nonlinear refractive index of n2 = 2x10−5 cm2/W for light near but below the bandgap. These numbers are comparable to those measured in InSb and indicate that InAs may be a good material for bistable devices.