Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Final Technical Report

Optically bistable devices using semiconductor materials

Stanley Desmond Smith, Michael E. Prise, C. T. Seaton, Frank A. P. Tooley, C. R. Pidgeon

Published Nov 1, 1984• 0 citations
OpenAlex

Abstract

This report covers work conducted from February 1982 to February 1983 on the nonlinear optical properties of semiconductors using tunable (bandgap resonant) laser sources. Emphasis is on Carbon Monoxide (CO) Indium Antimonides (InSb) at 77K, but an optical parametric amplifier is constructed for future work on systems at shorter wavelengths. The Optical Bistability and device properties of InSb have been investigated. Operation of a slice of InSb, held at 77K, pumped by a continuous wave CO laser, as an optical AND gate, triggered by 30 ps pulses at wavelength 1.06 micron with energies of 5 nJ, is demonstrated. By using temporal separation of the trigger pulses, information on the carrier dynamics is obtained. The design and construction of an angle tuned Optical Parametric Amplifier consisting of a lithium niobate crystal pumped by a 30 ps pulse from a neodymium YAG laser has been achieved.

Related papers

Optical Bistability And Transphasor Action In Semiconductors

David A. B. Miller, C. T. Seaton, Stanley Desmond Smith

We report the realisation of optically bistable switching and memory elements, and the transphasor Can all-optical transistor) in simple one element nonlinear Fabry-Perot interferometers made from the semiconductor InSb. These devices, which operate at 5 K and 77 K with mW powers from a cw CO laser between 5 and 6 μm rely on a strongly intensity-dependent refractive index discovered near the bandgap region of InSb and explained by bandgap resonant saturation. Switching speeds are shown to be < 500 ns in these first devices and operation to much shorter timescales is predicted. Operation at room temperature and in other semiconductors at other wavelengths remains a possibility and such devices offer considerable potential for all-optical switching in integrated optics and laser pulse control.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•May 15, 1981•1 citation

Nonlinearities at the Bandgap in InAs

CRAIG D. POOLE, E. Garmire

InSb has been shown to exhibit bistability and a very large nonlinear index.1 A semiconductor which is similiar, but which has a bandgap at shorter wavelengths is InAs. In this talk we present measurements of saturable absorption in InAs using an HF laser, which matches the bandgap of InAs at temperatures from 5° to 100° K. Using these measurements we have calculated a nonlinear refractive index of n2 = 2x10−5 cm2/W for light near but below the bandgap. These numbers are comparable to those measured in InSb and indicate that InAs may be a good material for bistable devices.

Topical Meeting on Optical Bistability (OB)•Jan 1, 1983•1 citation

Optical bistability in semiconductors

David A. B. Miller, S. Smith, C. T. Seaton

Detailed results are presented on optical bistability (OB) and two-beam optical transistor (transphasor) action in simple, one-element Fabry-Perot devices, with the semiconductor InSb using a CW CO laser near the bandgap region, and OB for semiconductors in general is discussed. OB and multistability are seen in transmission and reflection at 5 K. At 77 K,n_{2} \simeq 3 \times 10^{-3}cm2/W [corresponding to an effective\chi^{(3)} \sim 1ESU] is measured and OB is observed at ∼8 mW. Transphasor action at 5 K is presented and the influence of degenerate four-wave mixing is discussed. The basic physics of the microscopic mechanism for n2(bandgap-resonant saturation) is summarized and a simplified, generalized model is derived. This model and arguments on cavity optimization are used to predict order of magnitude limits to switching power, energy, and speed, both in InSb and other semiconductors, even in the absence of excitonic enhancement.

IEEE Journal of Quantum Electronics•Mar 1, 1981•90 citations

TEMPERATURE DEPENDENCE OF NONLINEAR REFRACTION, AND NOVEL BISTABLE OPTICAL DEVICES IN INDIUM-ANTIMONIDE.

Ralph S. Jameson

This dissertation presents the results of experimental research on the nonlinear refraction in InSb and the experimental demonstration of two nonlinear etalon devices using InSb as the active material. The first portion of the dissertation considers the Dynamic Burstein-Moss Shift model for nonlinearities in narrow-gap semiconductors. The physics and the equations are reviewed, and limitations in describing intensity dependent refraction in a semiconductor are considered. These limitations arise from the nonlinear dependence of charge carrier density upon irradiance. The second portion of the dissertation presents experimental measurements made on the nonlinear refraction of InSb at temperatures between 80 K and 182 K, for wavelengths from 5.75 μm to 6.10 μm, where the photon energy lay in the band tail below 100 cm⁻¹. Measurements of the linear absorption were first made with an infrared spectrometer for temperatures from 80 K to 300 K. The nonlinearity was measured by analyzing the transmission through InSb etalons. Nonlinear transmission curves were digitized and stored with an IBM PC-XT, then a curve fit was performed using the nonlinear refractive index as a fiting parameter. Observations are reported of increasing absorption, due in part to a thermal shift of the absorption edge. The second portion of the work presents the theory and demonstration of a bistable etalon using an edge-injected control beam. Plane-wave nonlinear etalon theory is used to describe the operation of such a device, illustrating the way in which switching and logic gate operation can be obtained. Two devices based on this concept are demonstrated: the 3-port device using a single control beam, and the 2SON gate using two control beams to perform two-input logic operation. The extension of the 2SON gate to an array of pixels, and some considerations for optimizing array performance, are considered. Two appendices follow the body of the dissertation, the first describing the preparation of the InSb etalon samples, and the second detailing several procedures for maintenance and operation of the CO laser used.

•Jan 1, 1986•0 citations

Optical Bistability For Optical Signal Processing And Computing

Nasser N. Peyghambarian, H. M. Gibbs

In this paper we present the basic principles of optical bistability and summarize the current advances in semiconductor optical switching, with emphasis on recent results in GaAs, CuCI, InAs, InSb, CdS, ZnS, and ZnSe etalons. These devices have great potential for applications involving optical signal processing and computing. As an example, we discuss the use of arrays of bistable devices for parallel optical processing and for addressable spatial light modulators. The use of nonlinear etalons as optical gates is also illustrated. To date, GaAs devices have shown the most favorable characteristics for practical applications. They operate at room temperature with a few milliwatts of power using a laser diode as the only light source. Quasi-cw operation and optical fiber signal regeneration have also been demonstrated. A GaAs NOR gate operates in 1 ps with <3 pJ incident energy; this, of course, implies a 1 ps switch-on time for a bistable etalon.

Optical Engineering•Feb 1, 1985•52 citations

InSb devices: transphasors with high gain, bistable swtiches and sequential logic gates

Andrew Walker, Frank A. P. Tooley, Michael E. Prise +4 more

Abstract InSb etalons operated at 77 K and illuminated by CO lasers (5.5 pm) exhibit continuous wave (c.w.) optical bistability. A wide range of experiments have been performed to further the basic characterization of these devices and to demonstrate their various potential applications. The latter include signal amplification, modulation and, with external switching, the construction of logic gates. Two devices on a single etalon have now been coupled to form a simple all-optical circuit. New results have also been obtained with InSb at room temperature with pulsed CO2 lasers (10.6 pm).

Philosophical Transactions of the Royal Society of London Series A Mathematical and Physical Sciences•Dec 18, 1984•38 citations
This report covers work conducted from February 1982 to February 1983 on the nonlinear optical properties of semiconductors using tunable (bandgap resonant) laser sources. Emphasis is on Carbon Monoxide (CO) Indium Antimonides (InSb) at 77K, but an optical parametric amplifier is constructed for future work on systems at shorter wavelengths. The Optical Bistability and device properties of InSb have been investigated. Operation of a slice of InSb, held at 77K, pumped by a continuous wave CO laser, as an optical AND gate, triggered by 30 ps pulses at wavelength 1.06 micron with energies of 5 nJ, is demonstrated. By using temporal separation of the trigger pulses, information on the carrier dynamics is obtained. The design and construction of an angle tuned Optical Parametric Amplifier consisting of a lithium niobate crystal pumped by a 30 ps pulse from a neodymium YAG laser has been achieved.
We report the realisation of optically bistable switching and memory elements, and the transphasor Can all-optical transistor) in simple one element nonlinear Fabry-Perot interferometers made from the semiconductor InSb. These devices, which operate at 5 K and 77 K with mW powers from a cw CO laser between 5 and 6 μm rely on a strongly intensity-dependent refractive index discovered near the bandgap region of InSb and explained by bandgap resonant saturation. Switching speeds are shown to be < 500 ns in these first devices and operation to much shorter timescales is predicted. Operation at room temperature and in other semiconductors at other wavelengths remains a possibility and such devices offer considerable potential for all-optical switching in integrated optics and laser pulse control.
InSb has been shown to exhibit bistability and a very large nonlinear index.1 A semiconductor which is similiar, but which has a bandgap at shorter wavelengths is InAs. In this talk we present measurements of saturable absorption in InAs using an HF laser, which matches the bandgap of InAs at temperatures from 5° to 100° K. Using these measurements we have calculated a nonlinear refractive index of n2 = 2x10−5 cm2/W for light near but below the bandgap. These numbers are comparable to those measured in InSb and indicate that InAs may be a good material for bistable devices.
Detailed results are presented on optical bistability (OB) and two-beam optical transistor (transphasor) action in simple, one-element Fabry-Perot devices, with the semiconductor InSb using a CW CO laser near the bandgap region, and OB for semiconductors in general is discussed. OB and multistability are seen in transmission and reflection at 5 K. At 77 K,n_{2} \simeq 3 \times 10^{-3}cm2/W [corresponding to an effective\chi^{(3)} \sim 1ESU] is measured and OB is observed at ∼8 mW. Transphasor action at 5 K is presented and the influence of degenerate four-wave mixing is discussed. The basic physics of the microscopic mechanism for n2(bandgap-resonant saturation) is summarized and a simplified, generalized model is derived. This model and arguments on cavity optimization are used to predict order of magnitude limits to switching power, energy, and speed, both in InSb and other semiconductors, even in the absence of excitonic enhancement.
This dissertation presents the results of experimental research on the nonlinear refraction in InSb and the experimental demonstration of two nonlinear etalon devices using InSb as the active material. The first portion of the dissertation considers the Dynamic Burstein-Moss Shift model for nonlinearities in narrow-gap semiconductors. The physics and the equations are reviewed, and limitations in describing intensity dependent refraction in a semiconductor are considered. These limitations arise from the nonlinear dependence of charge carrier density upon irradiance. The second portion of the dissertation presents experimental measurements made on the nonlinear refraction of InSb at temperatures between 80 K and 182 K, for wavelengths from 5.75 μm to 6.10 μm, where the photon energy lay in the band tail below 100 cm⁻¹. Measurements of the linear absorption were first made with an infrared spectrometer for temperatures from 80 K to 300 K. The nonlinearity was measured by analyzing the transmission through InSb etalons. Nonlinear transmission curves were digitized and stored with an IBM PC-XT, then a curve fit was performed using the nonlinear refractive index as a fiting parameter. Observations are reported of increasing absorption, due in part to a thermal shift of the absorption edge. The second portion of the work presents the theory and demonstration of a bistable etalon using an edge-injected control beam. Plane-wave nonlinear etalon theory is used to describe the operation of such a device, illustrating the way in which switching and logic gate operation can be obtained. Two devices based on this concept are demonstrated: the 3-port device using a single control beam, and the 2SON gate using two control beams to perform two-input logic operation. The extension of the 2SON gate to an array of pixels, and some considerations for optimizing array performance, are considered. Two appendices follow the body of the dissertation, the first describing the preparation of the InSb etalon samples, and the second detailing several procedures for maintenance and operation of the CO laser used.
In this paper we present the basic principles of optical bistability and summarize the current advances in semiconductor optical switching, with emphasis on recent results in GaAs, CuCI, InAs, InSb, CdS, ZnS, and ZnSe etalons. These devices have great potential for applications involving optical signal processing and computing. As an example, we discuss the use of arrays of bistable devices for parallel optical processing and for addressable spatial light modulators. The use of nonlinear etalons as optical gates is also illustrated. To date, GaAs devices have shown the most favorable characteristics for practical applications. They operate at room temperature with a few milliwatts of power using a laser diode as the only light source. Quasi-cw operation and optical fiber signal regeneration have also been demonstrated. A GaAs NOR gate operates in 1 ps with <3 pJ incident energy; this, of course, implies a 1 ps switch-on time for a bistable etalon.
Abstract InSb etalons operated at 77 K and illuminated by CO lasers (5.5 pm) exhibit continuous wave (c.w.) optical bistability. A wide range of experiments have been performed to further the basic characterization of these devices and to demonstrate their various potential applications. The latter include signal amplification, modulation and, with external switching, the construction of logic gates. Two devices on a single etalon have now been coupled to form a simple all-optical circuit. New results have also been obtained with InSb at room temperature with pulsed CO2 lasers (10.6 pm).