Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optical Engineering

Optical Bistability For Optical Signal Processing And Computing

Nasser N. Peyghambarian, H. M. Gibbs

Published Feb 1, 1985• 52 citations
Publisher

Abstract

In this paper we present the basic principles of optical bistability and summarize the current advances in semiconductor optical switching, with emphasis on recent results in GaAs, CuCI, InAs, InSb, CdS, ZnS, and ZnSe etalons. These devices have great potential for applications involving optical signal processing and computing. As an example, we discuss the use of arrays of bistable devices for parallel optical processing and for addressable spatial light modulators. The use of nonlinear etalons as optical gates is also illustrated. To date, GaAs devices have shown the most favorable characteristics for practical applications. They operate at room temperature with a few milliwatts of power using a laser diode as the only light source. Quasi-cw operation and optical fiber signal regeneration have also been demonstrated. A GaAs NOR gate operates in 1 ps with <3 pJ incident energy; this, of course, implies a 1 ps switch-on time for a bistable etalon.

DOI
10.1117/12.7973427

Related papers

Semiconductor nonlinear etalons

H. M. Gibbs, Jack L. Jewell, Nasser N. Peyghambarian +7 more

Abstract Previous observations of optical bistability in nonlinear etalons of ZnS, CuCl and GaAs are summarized. Emphasis is placed upon recent results in GaAs: similar room-temperature optical bistability at powers under 10 mW in bulk and multiple quantum-well etalons; room-temperature bistability achieved with a diode laser as a light source; NOR and other logic operations; optical fibre signal regeneration and continuous wave operation.

Philosophical Transactions of the Royal Society of London Series A Mathematical and Physical Sciences•Dec 18, 1984•8 citations

Optical nonlinearity, bistability, and signal processing in semiconductors

Nasser N. Peyghambarian, H. M. Gibbs

Semiconductors exhibit large optical nonlinearities near the band edge because of resonance enhancement. Optical bistability occurs when the optical nonlinearities are coupled with feedback. In bulk GaAs and GaAs–AlGaAs multiple-quantum-well superlattices, the nonlinearity arising from the presence of the free-exciton resonance has produced room-temperature optical bistability with a few milliwatts of power. The formation of biexcitons in CuCl, the saturation of the bound exciton on CdS, and band-filling effects in InSb, InAs, and HgCdTe lead to observation of bistability in these materials. A bistable etalon can be operated in an optical-gate mode to generate optical analogs of electronic gates such as and, or, and nor. It has been demonstrated that a GaAs optical NOR gate responds in ∼1 psec, using only ≲3 pJ of energy. However, because of the carrier lifetime of a few nanoseconds, the repetition rate of the NOR gate is now limited to a few hundred megahertz.

Journal of the Optical Society of America B•Jul 1, 1985•69 citations

Optical Bistability, Logic Gating, and Waveguide Operation in Semiconductor Etalons

Warren S. Warren, Koch, Gibbs

This article describes the application of one type of optical bistable device based on gallium arsenide as the nonlinear medium. The authors discuss several possible operations with GaAs nonlinear Fabry-Perot etalons. This article utilizes a recently developed computer model to illustrate the basic operating principles and applications. The authors mainly concentrate on the device operation itself. In keeping with common practice they use the term optical bistable device when referring to a device that can exhibit optical bistability even when not being used in such a manner. Instead of the expression nonlinear Fabry-Perot etalon, they often use nonlinear etalons or etalon devices.

Computer•Dec 1, 1987•14 citations

Optical Bistability and Modulation in Semiconductor Etalons

H. M. Gibbs, S. L. McCall, Thirumalai Venkatesan +3 more

Optical signal processing using all-optical circuitry is an increasingly attractive goal with the recent progress in long- lived light sources, high quantum efficiency detectors, and low- loss high-bandwidth optical fibers. Devices which permit one light beam to control another or which provide an optical memory afford a capability essential to the success of all-optical logic systems. Much progress has been made toward practical bistable1 devices since the first observation2 of optical bistability in sodium vapor. (By optical bistability we refer to devices containing no inverted medium, so that bistable lasers3 are explicitly excluded.) The most practical device so far, a semiconductor etalon consisting of 4 μm of GaAs between 0.2 μm of Al0.42Ga0.53As with R = 0.9 coatings, is described herein.

Integrated and Guided-Wave Optics•Jan 1, 1980•1 citation

Optical bistability: A novel approach to optical signal processing and communications

Nasser N. Peyghambarian

Optical bistability and its potential for optical signal processing and communications are reviewed. Recent experimental results in semiconductor optical bistability are presented. In particular, optical bistability in GaAs-AlGaAs superlattices and CuCl, ZnS, and ZnSe is discussed.

NASA conference publication•Mar 1, 1984•0 citations

Low-switching energy optical bistable devices

M. Dagenais, Wayne F. Sharfin

We describe two approaches to low-energy switching and optical bistability. In one approach, which is a more fundamental approach, we use the nonlinearity associated with bound excitons in CdS to demonstrate the lowest total switching energy (4 pJ) of any optical device exhibiting two stable output states for the same input intensity.1 Bound excitons were chosen because they are known to have a very large oscillator strength (f = 7), a fast radiative decay (tspont = 500 ps), and they do not diffuse in the crystal, thus permitting a sharp focusing geometry. Furthermore, they are a good approximation to quantum dots. In a different experiment we have operated a standard diode laser structure below threshold and have demonstrated an efficient optical switch that can be used in thresholding and decision-making applications. The device switches with <400 aJ (4 × 10−16 J or <3000 photons) of optical energy incident on the device.2 During the switching operation, only 10 pJ of electrical power is dissipated. The switch operates at room temperature, is compatible with optical communication systems, and has a gain of the order of 15 dB, leading to the important properties of cascadability and large fan-out. The operation of a high contrast (5:1) AND gate was demonstrated.

Annual Meeting Optical Society of America•Jan 1, 1986•0 citations
In this paper we present the basic principles of optical bistability and summarize the current advances in semiconductor optical switching, with emphasis on recent results in GaAs, CuCI, InAs, InSb, CdS, ZnS, and ZnSe etalons. These devices have great potential for applications involving optical signal processing and computing. As an example, we discuss the use of arrays of bistable devices for parallel optical processing and for addressable spatial light modulators. The use of nonlinear etalons as optical gates is also illustrated. To date, GaAs devices have shown the most favorable characteristics for practical applications. They operate at room temperature with a few milliwatts of power using a laser diode as the only light source. Quasi-cw operation and optical fiber signal regeneration have also been demonstrated. A GaAs NOR gate operates in 1 ps with <3 pJ incident energy; this, of course, implies a 1 ps switch-on time for a bistable etalon.
Semiconductors exhibit large optical nonlinearities near the band edge because of resonance enhancement. Optical bistability occurs when the optical nonlinearities are coupled with feedback. In bulk GaAs and GaAs–AlGaAs multiple-quantum-well superlattices, the nonlinearity arising from the presence of the free-exciton resonance has produced room-temperature optical bistability with a few milliwatts of power. The formation of biexcitons in CuCl, the saturation of the bound exciton on CdS, and band-filling effects in InSb, InAs, and HgCdTe lead to observation of bistability in these materials. A bistable etalon can be operated in an optical-gate mode to generate optical analogs of electronic gates such as and, or, and nor. It has been demonstrated that a GaAs optical NOR gate responds in ∼1 psec, using only ≲3 pJ of energy. However, because of the carrier lifetime of a few nanoseconds, the repetition rate of the NOR gate is now limited to a few hundred megahertz.
This article describes the application of one type of optical bistable device based on gallium arsenide as the nonlinear medium. The authors discuss several possible operations with GaAs nonlinear Fabry-Perot etalons. This article utilizes a recently developed computer model to illustrate the basic operating principles and applications. The authors mainly concentrate on the device operation itself. In keeping with common practice they use the term optical bistable device when referring to a device that can exhibit optical bistability even when not being used in such a manner. Instead of the expression nonlinear Fabry-Perot etalon, they often use nonlinear etalons or etalon devices.
Optical signal processing using all-optical circuitry is an increasingly attractive goal with the recent progress in long- lived light sources, high quantum efficiency detectors, and low- loss high-bandwidth optical fibers. Devices which permit one light beam to control another or which provide an optical memory afford a capability essential to the success of all-optical logic systems. Much progress has been made toward practical bistable1 devices since the first observation2 of optical bistability in sodium vapor. (By optical bistability we refer to devices containing no inverted medium, so that bistable lasers3 are explicitly excluded.) The most practical device so far, a semiconductor etalon consisting of 4 μm of GaAs between 0.2 μm of Al0.42Ga0.53As with R = 0.9 coatings, is described herein.
We describe two approaches to low-energy switching and optical bistability. In one approach, which is a more fundamental approach, we use the nonlinearity associated with bound excitons in CdS to demonstrate the lowest total switching energy (4 pJ) of any optical device exhibiting two stable output states for the same input intensity.1 Bound excitons were chosen because they are known to have a very large oscillator strength (f = 7), a fast radiative decay (tspont = 500 ps), and they do not diffuse in the crystal, thus permitting a sharp focusing geometry. Furthermore, they are a good approximation to quantum dots. In a different experiment we have operated a standard diode laser structure below threshold and have demonstrated an efficient optical switch that can be used in thresholding and decision-making applications. The device switches with <400 aJ (4 × 10−16 J or <3000 photons) of optical energy incident on the device.2 During the switching operation, only 10 pJ of electrical power is dissipated. The switch operates at room temperature, is compatible with optical communication systems, and has a gain of the order of 15 dB, leading to the important properties of cascadability and large fan-out. The operation of a high contrast (5:1) AND gate was demonstrated.