Autonomous systems under partial observability act on beliefs, not raw sensor events. QANTIS treats the quantum processor as a calibrated belief-update service in that loop: it receives a prior and an observation model, estimates the rare-event evidence term, and returns an ordinary posterior to a classical planner. This paper asks whether that service can be reused across a sequential Tiger POMDP horizon on present IBM Heron hardware without corrupting the planner-facing posterior. We answer with a controlled hardware case study rather than an end-to-end autonomy or wall-clock speedup claim. The study compares no amplification, guarded Grover amplification, and all-step fixed-point amplification on the same trajectory, then checks whether the returned posterior would change the downstream action. All-step FPAA preserves the Tiger posterior across the reported 8-step and 12-step primary runs, and the 20-step and 32-step controls remain inside the same operating band. In every reported decision check, the hardware posterior and the exact Bayes posterior select the same immediate action. Boundary-aware BIQAE stabilizes amplitude estimation near zero and near one, while a rare-event sweep maps the logical sample-complexity envelope for one-in-a-million evidence. The result is an operating envelope for a hardware-calibrated belief-update primitive, not a standalone hardware-advantage claim.
Autonomous systems under partial observability act on beliefs, not raw sensor events. QANTIS treats the quantum processor as a calibrated belief-update service in that loop: it receives a prior and an observation model, estimates the rare-event evidence term, and returns an ordinary posterior to a classical planner. This paper asks whether that service can be reused across a sequential Tiger POMDP horizon on present IBM Heron hardware without corrupting the planner-facing posterior. We answer with a controlled hardware case study rather than an end-to-end autonomy or wall-clock speedup claim. The study compares no amplification, guarded Grover amplification, and all-step fixed-point amplification on the same trajectory, then checks whether the returned posterior would change the downstream action. All-step FPAA preserves the Tiger posterior across the reported 8-step and 12-step primary runs, and the 20-step and 32-step controls remain inside the same operating band. In every reported decision check, the hardware posterior and the exact Bayes posterior select the same immediate action. Boundary-aware BIQAE stabilizes amplitude estimation near zero and near one, while a rare-event sweep maps the logical sample-complexity envelope for one-in-a-million evidence. The result is an operating envelope for a hardware-calibrated belief-update primitive, not a standalone hardware-advantage claim.
Autonomous navigation under uncertainty requires solving partially observable Markov decision processes (POMDPs) for planning and assigning sensor measurements to tracked targets--a task known as multi-target data association (MTDA). Both problems become computationally demanding at scale: belief conditioning costs O(P(e)−1) per node under rare evidence, while MTDA is NP-hard. Quantum amplitude amplification can quadratically reduce the belief-update query cost to O(P(e)−1/2), while QUBO reformulations expose MTDA to quantum and quantum-inspired optimisation heuristics. We present QANTIS, a modular platform that integrates quantum belief update (Grover amplitude amplification and BIQAE), QUBO-based data association via FPC-QAOA, and composable error mitigation, and we report a 45-experiment hardware study on three IBM Heron backends. On hardware, a single Grover iterate applied to a Tiger belief oracle amplifies a rare observation probability from 0.179 to 0.907 (5.1×; ISA 18) while preserving the Bayesian posterior (Hellinger 0.0015), increasing usable-shot yield from 1,463 to 7,429. We interpret this as a hardware validation of the quadratic query-complexity mechanism at k=1 with posterior preservation, rather than a wall-clock advantage claim. We further demonstrate, to our knowledge, the first closed-loop hybrid quantum-classical Tiger POMDP on superconducting hardware (T=8, max Hellinger below 0.015), and empirically characterise NISQ feasibility boundaries: ZNE-based error mitigation is beneficial below ISA ≈100 and harmful above ISA ≳1,000; FPC-QAOA is meaningful at ≤15 QUBO variables (ISA ≲450). These results characterise practical operating regimes on current superconducting hardware rather than wall-clock quantum advantage at today's problem scales.
Quantum processors are now used as feature generators for classical models on tabular data. A circuit encodes each record, the device returns expectation values, and a classical model learns from them. A recent report claimed large gains from such features, gains that appeared only on noisy hardware. These claims are hard to check, because a quantum device is not a static function. Its state changes from job to job and from one calibration to the next, and that drift can leak information about the outcome into the features. We propose a five-step protocol for testing claims of this kind. It runs a circuit that carries no data in the same jobs as the real one. It checks whether the hardware leaves a recognizable mark on each job. It compares random and natural assignments of records to jobs, replays the null results under other submission orders, and closes the leak with a job-purged backtest. We apply it, pre-registered, to the HSBC and IBM study of fill probabilities in bond trading, which reported a large hardware-only gain. We use a public analog task and run the study's circuit on a 129-qubit chain of an IBM Heron processor. Under controlled assignment the hardware features give no gain over classical features, and the device reproduces the ideal features about as well as shot noise allows. Yet every job carries a distinct fingerprint. A circuit with no data at all predicts fills well above chance when records are batched by outcome and the same job sits on both sides of the train/test split. Removing that overlap removes the effect. The protocol costs under an hour of processor time and is designed for any hardware feature or kernel pipeline on tabular data.
This paper takes the first step towards hardware evidence for The Quantum Pi Benchmark (QPB) under its provenance (P) and blindness (B) axes and non-total capability grid (R). Using IBM Heron r2 Quantum Processing Units (QPUs), this paper reports findings to support P0/B0/R2 compiled-address amplification and P1/B0/R3 only for the loaded-content equality-predicate family, spanning 220 logical results and 324 job records. In the compiled-address family, single-iteration efficiency is approximately 66% through 110 routed CZ gates and falls to roughly 15% at the traceable larger instances. The two recoverable N = 512, k = 1 executions used 270 CZ gates and returned 84 marked outcomes in 32,768 shots, or 0.256% (95% Wilson interval 0.207%–0.317%), 1.31 times the uniform expectation. Matched true, scrambled, and zero controls show that this signal amplifies a compiled mark rather than evaluating Pi content. A content-addressed Quantum Read Only Memory (QROM) bridge and a coherent block-equality negative result are retained as P1/B0 diagnostics. Loaded-content equality separates supplied Pi blocks from corrupted controls: the monolithic discrimination gap decreases from 0.780 at six bits to 0.132 at 24 bits. Across three matched transpiler placements, tiled equality gives gaps of 0.761 ± 0.004, 0.404 ± 0.153, 0.344 ± 0.037, and 0.128 ± 0.034 at 6, 12, 18, and 24 bits, respectively, where uncertainties are descriptive sample standard deviations. The replicated mean routed-cost reduction is 29%–41%. Phase-pair circuits are classified as P1/B0 diagnostics rather than R3: five non-overlapping spans per control, ten circuits total, were submitted in one quantum hardware job. They recover 106/106 expected signs in each control with mean edge magnitudes 0.964 and 0.951. These are bounded results that do not establish direct digit access, controller-blind search, collision finding, frontier performance, or end-to-end advantage.
Abstract This paper reports the first end-to-end fault-tolerant quantum computing stack to clear all four strict-FTQC requirements simultaneously on commodity superconducting NISQ silicon, rented through standard IBM Quantum cloud subscription with no purpose-built research machine, no custom decoder, and no magic-state distillation factory. The four requirements: (i) surface-code quantum error correction at distance d≥3 with logical-error rate below the unencoded baseline; (ii) a universal Clifford+T gate set executed via magic-state injection, with no arbitrary angle physical rotation carrying non-Clifford content on the wire (the algorithm-determined non-Clifford angle never fires on the silicon; the native RZ(θphys) on Heron fires only at Clifford-multiple angles required to compose H, S, T); (iii) heterogeneous primitive composition (teleportation, lattice-surgery CNOT, T-gate, logical memory) on a persistent encoded register; and (iv) runtime admissibility verification on every committed result. All five chips, five chemistry workloads spanning four molecules, and twenty-two governed runs in this paper were executed on the same primitive engine without architectural change. The architectural shift that makes this work on today’s hardware is the d=1 inversion: a 150-qubit governed encoded register held at substrate distance d=1 on the chip’s physical qubits, with logical fidelity preserved by Seed IQ execution governance over the encoded layer rather than by a larger code distance. Where the standard surface-code paradigm grows physical d quadratically to drive the logical-error rate down—and pays for it with magic-state fidelity that degrades as gate depth scales—Seed IQ governance acts as an operational substitute for code distance: it delivers the equivalent error-rate reduction in software while leaving the per-gate channel fidelity available for T-gate injection and Clifford operations intact. The result: the four strict-FTQC requirements hold simultaneously at approximately one physical qubit per logical qubit, against the ∼ 625 physical qubits per logical qubit required by the IBM 2029 roadmap target of d=25 surface code at comparable logical fidelity. Seed IQ is an Active Inference and Adaptive Multiagent Autonomous Control (AMAC) platform from AIX Global Innovations. Campaign summary. Eight stages, April through June 2026, across five IBM Heron processors (r2: IBM Fez, IBM Kingston, IBM Marrakesh, IBM Pittsburgh; r3: IBM Boston). April 9 — surface-code QEC: −88.5% LER reduction at d=3 on IBM Fez, −93.1% at d=5 where the MWPM+UF baseline collapsed, −60.9% at d=3 on 1.28°ø dirtier IBM Pittsburgh silicon. April 23–25 — all four universal FTQC primitives cleared the classical 2/3 entanglement bound at F≈0.99. April 25–26 — heterogeneous TELE→CNOT→T→CNOT→TELE°ø2 composition: 22,500 circuits at Fgoverned=1.0000, zero detected logical errors. May 7–9 — H2, 10 runs across 3 chips, 10/10 inside chem-acc, best ΔE=+0.0157mHa, two chips bit-identical to twelve decimals. May 23 —LiH, 3 runs across 3 chips, 3/3 inside chem-acc, two chips tied at ΔE=+0.056mHa. May 28–30 — H2O, 3 runs across 3 chips, 3/3 inside chem-acc at ΔE=+0.051mHa, all three bit-identical to twelve decimals. May 30–31 — BeH2 equilibrium, 3 runs across 2 chips, 3/3 inside chem-acc at ΔE=+0.000595mHa (2690.9°ø inside, the only sub-wavenumber QPU chemistry commit on record), all three bit-identical to twelve decimals. June 1 — BeH2 transition state (|cHF |2≈0.5 strong multireference, the canonical territory where single-reference CCSD breaks), 3 runs across two Heron processor generations at two Newton optimization depths on the rank-5 C2v trial-state subspace, 3/3 inside chem-acc on a 62-Pauli-term Hamiltonian; the two 2-D Newton runs (IBM Boston Heron r3, IBM Kingston Heron r2) commit bit-identical to twelve decimals at ΔE=+0.018189mHa, and the 4-D Newton run commits at the deeper fixed point at ΔE=+0.012643mHa (126.6°ø inside chem-acc, 1.6°ø inside the CCSD(T) gold band). Aggregate: twenty-two runs, 22/22 inside chemical accuracy. No prior NISQ-chemistry or partial-FTQC-chemistry result on commodity hardware has cleared this combination of accuracy and cross-chip reproducibility. Full per-stage detail in Åò4–Åò12.8. Compliance. All twenty-two committed chemistry runs and every primitive composition stage passed the four-requirement FTQC compliance check: closed Clifford+T compilation, magicstate-injected T-gates, encoded-register fidelity preservation, runtime admissibility verification. Fgoverned=1.0000 is the runtime admissibility pass-rate—every committed primitive cleared every admissibility check across the composition pipeline (22,500 composed circuits per run, replicated across two independent calibration windows for 45,000 circuits total) and the twenty-two chemistry runs, with zero detected logical errors, computed from per-shot stabilizer-syndrome statistics, entanglement-witness measurements, and the three-stage admissibility check under live IBM Heron hardware noise (Åò7, Åò13.13). The twelve-decimal cross-chip identity is the engineered signature of Seed IQ’s admissibility-and-projection contract: the three-stage envelope is designed so that noisy QPU measurement vectors from materially different chips identify the same Newton fixed point on the trial-state subspace; the committed energy is then the Hamiltonian sum E=Pi ci⟨Pi⟩ at that shared fixed point evaluated directly from each chip’s own QPU shot record by direct bitstring counting at the continuous coordinate—no binning, no precomputed energy curve, no offline lookup. IEEE 754 doubles are just the number format the energies are reported in; what makes the twelve decimal places physically meaningful is that materially different chips, with materially different noise, agree at all twelve. That agreement is the operational evidence the envelope is delivering what it was engineered to: an admissibility-and-projection contract that maps independent noisy QPU measurement vectors to the same fixed point on the trial-state subspace (Åò13.10, Åò14).
H. Billah and M.M.H. Sarker contributed equally to this work. Interpreting a fixed quantum circuit's output as evidence of a hardware effect requires ruling out two things usually conflated with it: finite-sample fluctuation, and structure already present in the circuit's own noiseless output. Less commonly checked is a third: whether the reference circuit compared against is the one actually executed, once compiler-level qubit routing is accounted for. We execute a fixed 35-qubit, 243-gate diagnostic circuit on IBM Heron-family hardware (three runs, two backends) and show this third check is essential: the routed circuit submitted to hardware has different noiseless predictions than the logical circuit intended, for several qubits. Against the correct, routed-circuit reference, the aggregate deviation is significant in two of three runs, and four registers (0, 9, 14, 27) show a significant output-probability deviation in every run — though we distinguish a high-confidence subset, {0, 9, 27}, with tightly time-matched calibration, from qubit 14, included only on an exploratory basis given its calibration was retrieved roughly two weeks post-execution. Same-backend replicates correlate more strongly by the Pearson measure, though a rank-based (Spearman) test shows this gap does not survive at the level of register ordering, indicating substantial leverage from a small number of registers rather than a broadly robust pattern; these three executions also share a byte-identical payload and are not independent replications in the strictest sense. The mechanism is only partially resolved: independent single-qubit readout error and raw gate count are ruled out as complete explanations for most of these registers, but the simplest version of the leading hypothesis for the single most-affected register does not reproduce the observed cross-backend pattern even with live, backend-specific timing data. A second, structurally different circuit validated only in simulation calibrates the statistical procedure's behavior under one synthetic noise model; it does not itself establish generality to real hardware, and the specific register set found here should not be expected to generalize beyond this study. Note on scope: this is a methodology and case-study contribution centered on executed-circuit references for fixed-circuit diagnostics, not a characterization of IBM Heron hardware in general or a randomized-benchmarking experiment in the formal sense. Supporting data, the routed OpenQASM circuits, raw measurement counts, and analysis code for this study are available on request from the corresponding author. Affiliation: Sonicium Quantum Lab Ltd., Dhaka, Bangladesh.
Scalable quantum processors require control, readout, feedback, calibration, and error correction to coexist under bounded latency and shared-resource constraints, whereas existing platforms typically optimize only a subset of these capabilities. This article presents QCORE (Quantum-Control-Oriented Real-Time Execution), a QPU-side digital control reference architecture positioned between the Host and a platform-specific analog/mixed-signal front end. QCORE separates task management, shared resources, hard-real-time execution, and long-timescale services into four hardware partitions. A fast-result sideband closes same-round feedback, a Measurement Packet provides a traceable measurement and service interface, and a common service-control skeleton, Tile-local QEC, and versioned safe-point commit organize calibration, error correction, and long-term state updates. Transaction-level, event-driven, and quantum-behavioral models are used for evaluation. At a background load of 0.8, the P99 latency of the shared Measurement Packet/Event feedback path is (1.984±0.004)Lmax. Closed-loop operation reduces the mean frequency error by 83.2%±0.8% and lowers the state-assignment error at maximum readout drift from 10.39%±0.54% to 5.37%±0.29%. No unsafe acceptance or mixed-version observation is observed in 100,000 configuration transactions, and Tile-local QEC reduces modeled global-boundary demand and yields a 2.08× capacity-normalized scaling estimate.