We identify the precise thermodynamic roles of internal coupling in quantum thermal machines by analyzing the quantum Otto cycle across thermalized Gibbs-state limit cycles (GSLC) and finite-time non-equilibrating limit cycles (NELC). By systematically comparing the internally coupled system with standard and dressed-spectrum models, we resolve previous misconceptions regarding the physical origins of performance variations. First, we establish that the internally coupled system outperforms the standard system solely due to the Hamiltonian spectrum update, which intrinsically broadens the operating regimes. Second, we reveal that time-dependent efficiency and coefficient of performance (COP) are not caused by general quantum coherence, but specifically by eigenbasis mismatch arising from the non-commutativity of Hamiltonians across different strokes. The mismatch acts as quantum internal friction, reducing efficiency and COP and generating dissipative thermal modes. This results in the power-efficiency trade-off law, which we should find in realistic engines. However, we would not find the trade-off law when coherence exists but the eigenbasis mismatch does not exist, because there would be no friction, and hence the efficiency and COP would remain completely time-independent. Third, we isolate the distinct impact of coherence on power output. Validated by the global approach of the GKSL master equation, we demonstrate that coherence inherently reduces power by suppressing kinetic thermalization rates, regardless of eigenbasis mismatch.
We identify the precise thermodynamic roles of internal coupling in quantum thermal machines by analyzing the quantum Otto cycle across thermalized Gibbs-state limit cycles (GSLC) and finite-time non-equilibrating limit cycles (NELC). By systematically comparing the internally coupled system with standard and dressed-spectrum models, we resolve previous misconceptions regarding the physical origins of performance variations. First, we establish that the internally coupled system outperforms the standard system solely due to the Hamiltonian spectrum update, which intrinsically broadens the operating regimes. Second, we reveal that time-dependent efficiency and coefficient of performance (COP) are not caused by general quantum coherence, but specifically by eigenbasis mismatch arising from the non-commutativity of Hamiltonians across different strokes. The mismatch acts as quantum internal friction, reducing efficiency and COP and generating dissipative thermal modes. This results in the power-efficiency trade-off law, which we should find in realistic engines. However, we would not find the trade-off law when coherence exists but the eigenbasis mismatch does not exist, because there would be no friction, and hence the efficiency and COP would remain completely time-independent. Third, we isolate the distinct impact of coherence on power output. Validated by the global approach of the GKSL master equation, we demonstrate that coherence inherently reduces power by suppressing kinetic thermalization rates, regardless of eigenbasis mismatch.
This paper presents an analysis of quantum Otto heat engines operating out of equilibrium. It explores the fundamental thermodynamic principles governing these engines, focusing on efficiency, work output, and the impact of environmental factors, including thermal gradients, external fields, noise, and decoherence. The study investigates the effects of non-equilibrium conditions on engine performance, highlighting challenges and opportunities in practical realizations. Through numerical simulations, the article examines the power, efficiency, and performance coefficients, revealing trade-offs between these metrics and the influence of temperature differences and internal coupling strength. The results demonstrate that non-equilibrium effects can significantly reduce efficiency compared to idealized scenarios, underscoring the importance of accounting for both quantum effects and real-world constraints in the design and optimization of quantum heat engines. This work contributes to the growing body of knowledge in quantum thermodynamics, offering insights for quantum computing, sustainable energy technologies, and thermodynamic cycles at the quantum scale.
We present a detailed study of quantum thermal machines employing quantum systems as working substances. In particular, we study two different types of two-stroke cycles where two collections of identical quantum systems with evenly spaced energy levels are initially prepared at thermal equilibrium by putting them in contact with a cold and a hot thermal bath, respectively. The two cycles differ in the absence or the presence of a mediator system, while, in both cases, nonresonant exchange Hamiltonians are exploited as particle interactions. We show that the efficiencies of these machines depend only on the energy gaps of the systems composing the collections and are equal to the efficiency of ``equivalent'' Otto cycles. Focusing on the cases of qubits or harmonic oscillators for both models, we maximize the engine power and analyze, in the model without the mediator, the role of the waiting time between subsequent interactions. It turns out that the case with the mediator can bring performance advantages when the interaction times are comparable with the waiting time of the correspondent cycle without the mediator. We find that in both cycles, the power peaks of qubit systems can surpass the Curzon-Ahlborn efficiency. Finally, we compare our cycle without the mediator with previous schemes of the quantum Otto cycle showing that high coupling is not required to achieve the same maximum power.
Algebraic methods for solving time-dependent Hamiltonians are used to investigate the performance of quantum thermal machines. We investigate the thermodynamic properties of an engine formed by two coupled qubits, performing an Otto cycle. The thermal interaction occurs with two baths at different temperatures, while work is associated with the interaction with an arbitrary time-dependent magnetic field that varies in intensity and direction. For the coupling, we consider the 1D isotropic Heisenberg model, which allows us to describe the system by means of the irreducible representation of the su(2) Lie algebra within the triplet subspace. We also inspect different settings of the temperatures and frequencies of the cycle, and investigate the corresponding operation regimes. We describe how these regimes can change with the speed of the protocol. Finally, we compare the weak and strong coupling regimes, and conclude that for the weak case the efficiency is optimal and can surpass the value of the classical Otto cycle. For low temperatures of the heat baths, we show that losses due to quantum friction are reduced in the strong coupling limit.
Abstract We start with a revision study of two coupled spin- 1 / 2 under the influence of Kaplan–Shekhtman–Entin-Wohlman–Aharony interaction and a magnetic field. We first show the role of idle levels, i.e. levels that do not couple to the external magnetic field, when the system is working as a heat engine as well as when it is a refrigerator. Then we extend the results reported in Altintas and Müstecaplıoğlu (2015 Phys. Rev. E 92 022142) by showing that it is not necessary to change both the magnetic field as well as the coupling parameters to break the extensive property of the work extracted globally from two coupled spin- 1 / 2 as has been demonstrated there. Then we study the role of increasing the number of coupled spins on efficiency, extractable work, and coefficient of performance (COP). First, we consider two- and three-coupled spin- 1 / 2 Heisenberg X X X -chain. We prove that the latter can outperform the former in terms of efficiency, extractable work, and COP. Then we consider the Ising model, where the number of interacting spins ranges from two to six. We show that only when the number of interacting spins is odd the system can work as a heat engine in the strong coupling regime. The enhancements in efficiency and COP are explored in detail. Finally, this model confirms the idea that entanglement and quantum correlations are not the reasons behind the enhancements observed in efficiency, extractable work, and COP, but only due to the structure of the energy levels of the Hamiltonian of the working substance. In addition to this, the extensive property of global work as well, is not affected by entanglement and quantum correlations.
Thermodynamic constraints impose a trade-off between power and efficiency in heat engines, preventing the simultaneous achievement of high power and high efficiency. For classical microscopic engines, explicit inequalities have been discovered, demonstrating the inherent inevitability of this power-efficiency trade-off. However, extensions of these results to quantum engines have so far been limited to cases of slow operation. In this study, we derive a power-efficiency trade-off relation for a paradigmatic quantum engine operating within a finite time, specifically the Otto cycle of a quantum harmonic oscillator. By utilizing a phase-space approach based on quasiprobability representations, we establish a universal trade-off relation applicable to arbitrary time-dependent protocols during the adiabatic processes. Our results reveal that the power of the quantum engine vanishes as the efficiency approaches the quantum-mechanical efficiency bound, which is stricter than the Carnot bound. Furthermore, we identify the conditions under which the upper bound is attained, which indicate maximum power is achieved when the generation of quantum coherence is reduced, and the difference in time durations of the isochoric processes increases. These findings are validated through numerical calculations, which confirm their applicability across various types of protocols for heat engine cycles.
The quantum Otto cycle serves as a bridge between the macroscopic world of heat engines and the quantum regime of thermal devices composed from a single element. We compile recent studies of the quantum Otto cycle with a harmonic oscillator as a working medium. This model has the advantage that it is analytically trackable. In addition, an experimental realization has been achieved, employing a single ion in a harmonic trap. The review is embedded in the field of quantum thermodynamics and quantum open systems. The basic principles of the theory are explained by a specific example illuminating the basic definitions of work and heat. The relation between quantum observables and the state of the system is emphasized. The dynamical description of the cycle is based on a completely positive map formulated as a propagator for each stroke of the engine. Explicit solutions for these propagators are described on a vector space of quantum thermodynamical observables. These solutions which employ different assumptions and techniques are compared. The tradeoff between power and efficiency is the focal point of finite-time-thermodynamics. The dynamical model enables the study of finite time cycles limiting time on the adiabatic and the thermalization times. Explicit finite time solutions are found which are frictionless (meaning that no coherence is generated), and are also known as shortcuts to adiabaticity.The transition from frictionless to sudden adiabats is characterized by a non-hermitian degeneracy in the propagator. In addition, the influence of noise on the control is illustrated. These results are used to close the cycles either as engines or as refrigerators. The properties of the limit cycle are described. Methods to optimize the power by controlling the thermalization time are also introduced. At high temperatures, the Novikov–Curzon–Ahlborn efficiency at maximum power is obtained. The sudden limit of the engine which allows finite power at zero cycle time is shown. The refrigerator cycle is described within the frictionless limit, with emphasis on the cooling rate when the cold bath temperature approaches zero.