This paper presents an analysis of quantum Otto heat engines operating out of equilibrium. It explores the fundamental thermodynamic principles governing these engines, focusing on efficiency, work output, and the impact of environmental factors, including thermal gradients, external fields, noise, and decoherence. The study investigates the effects of non-equilibrium conditions on engine performance, highlighting challenges and opportunities in practical realizations. Through numerical simulations, the article examines the power, efficiency, and performance coefficients, revealing trade-offs between these metrics and the influence of temperature differences and internal coupling strength. The results demonstrate that non-equilibrium effects can significantly reduce efficiency compared to idealized scenarios, underscoring the importance of accounting for both quantum effects and real-world constraints in the design and optimization of quantum heat engines. This work contributes to the growing body of knowledge in quantum thermodynamics, offering insights for quantum computing, sustainable energy technologies, and thermodynamic cycles at the quantum scale.
This paper presents an analysis of quantum Otto heat engines operating out of equilibrium. It explores the fundamental thermodynamic principles governing these engines, focusing on efficiency, work output, and the impact of environmental factors, including thermal gradients, external fields, noise, and decoherence. The study investigates the effects of non-equilibrium conditions on engine performance, highlighting challenges and opportunities in practical realizations. Through numerical simulations, the article examines the power, efficiency, and performance coefficients, revealing trade-offs between these metrics and the influence of temperature differences and internal coupling strength. The results demonstrate that non-equilibrium effects can significantly reduce efficiency compared to idealized scenarios, underscoring the importance of accounting for both quantum effects and real-world constraints in the design and optimization of quantum heat engines. This work contributes to the growing body of knowledge in quantum thermodynamics, offering insights for quantum computing, sustainable energy technologies, and thermodynamic cycles at the quantum scale.
Abstract This paper presents an analysis of quantum Otto heat engines operating in non-equilibrium. It explores the fundamental thermodynamic principles that govern these engines, focusing on efficiency, work output, and the impact of environmental factors such as thermal gradients, external fields, noise, and decoherence. The study investigates the effects of non-equilibrium conditions on engine performance, highlighting challenges and opportunities in practical realizations. Through numerical simulations, the article examines the power, efficiency, and performance coefficients, revealing trade-offs between these metrics and the influence of temperature differences and internal coupling strength. The results demonstrate that non-equilibrium effects can significantly reduce efficiency compared to ideal scenarios, emphasizing the importance of considering both quantum effects and real-world limitations in the design and optimization of quantum heat engines. This work contributes to the growing body of knowledge in quantum thermodynamics, offering insights for quantum computing, sustainable energy technologies, and thermodynamic cycles at the quantum scale.
In this chapter, we examine how quantum coherence affects the effectiveness and performance of quantum Otto engines running in nonequilibrium conditions. Energy conversion on a quantum scale can be understood through the use of quantum Otto engines, which employ cyclic thermodynamic processes involving isochoric and adiabatic transformations. We examine how the ability to extract work from thermal reservoirs at different temperatures is impacted by preserving quantum coherence among the engine’s operating states. We investigate the dynamics of coherence under various nonequilibrium conditions and configurations, including changing temperatures and coupling strengths, using the Quantum Master Equation framework. According to our research, engines with improved quantum coherence perform noticeably better than their classical counterparts, allowing for higher efficiencies and more work extraction. We also explore optimization techniques and real-world applications for creating quantum heat engines that make use of coherence as a vital resource. The potential of coherent quantum states in powering next-generation energy systems is highlighted in this work, which connects theoretical developments in quantum thermodynamics with real-world applications.
Quantum heat machines, encompassing heat engines, refrigerators, heaters, and accelerators, represent the forefront of quantum thermodynamics, offering a novel paradigm for converting heat energy into useful mechanical work. Leveraging quantum mechanical principles, these machines promise superior efficiency and performance compared to classical counterparts, with potential applications in renewable energy and quantum computing. This paper investigates a quantum Otto engine operating in both ideal and finite-time scenarios, employing a two-level system interacting with a harmonic oscillator within the framework of the anisotropic quantum Rabi-Stark model (AQRSM) as the working medium. This model is notable for exhibiting both first-order and continuous quantum phase transitions. By focusing on quantum heat engines, our study reveals that these phase transitions critically modulate the efficiency and power of AQRSM-based engines, outperforming quantum engines fueled by working medium with harmonic spectrum. Additionally, we explore the impacts of quantum friction and conduct limit cycle analysis in finite-time operations, providing insights into optimizing quantum heat engines for practical implementation.
The fast-developing quantum technology is propelling thermal machine, which lies at the heart of thermodynamics, into a new golden era. Being stochastic because of the non-negligible thermal and quantum fluctuations, the efficiency and power of a finite-time quantum heat engine exhibit a trade-off, preventing the simultaneous achievement of high power and high efficiency. Conventional studies treat the statistics of a heat engine by assuming canonical thermalization, which is valid only under weak-coupling conditions. We here investigate the noncanonical effect on the statistics of the efficiency and power for a finite-time quantum Otto cycle. It is revealed that their average values and variances are highly controllable by engineering the energy spectrum structure of the composite system consisting of the working substance and the bath. Near the quantum critical point induced by the formation of a bound state in the energy spectrum, the average efficiency and power can be boosted simultaneously, meanwhile, both of their variances are decreased. Deepening our understanding of the usefulness of quantum reservoir engineering in thermodynamics, our result lays the foundation for the realization of efficient and stable quantum energy devices.
Quantum thermodynamics (QT) is an emerging field of research that aims to investigate how the laws of thermodynamics and quantum mechanics merge together in small quantum systems.With advances at the necessary technology to control and measure those small physical systems this field has acquired even more importance, not only in the sense that it can be tested, which is a good thing for basic research, but that new applications could be implemented at these scales, so a better comprehension of the limitations imposed by quantum thermodynamics turns out to be of crucial importance for these goals, which forces theoreticians to produce experimentally relevant versions of these new concepts.Another important aspect present at those systems is that part of them work in a regime where its constituents are described by non-thermal states, and in particular non-thermal steady states, which brings to light a different thermodynamic description, usually called steady-state thermodynamics, therefore one of the goals that we are willing to achieve with this thesis is to give an introduction to QT of systems out-of-equilibrium.One of the related subtopics that physicists deal with in QT and the one that we will be focusing on this work are the use of non-thermal stationary states to build heat engines in the quantum domain, and the analyses of the features that this new regime could possibly allow, like the use of quantum resources as a way to overcome classical limitations imposed on its performance, like to attain efficiencies higher than Carnot's or operate in certain regimes unattainable using only classical resources.Therefore, in order to clarify the underlying physics of those systems in a non-thermal regime, any experimentally well suited content is more than welcome.So keeping that in mind we devised an experimentally relevant thermodynamic cycle for a transmon qubit WS interacting with a non-thermal environment composed by two subsystems, an externally excited cavity and a classical heat bath with temperature T. The WS undergoes a non-conventional cycle (different from Otto, Carnot, etc.) through a succession of non-thermal stationary states obtained by slowly varying its bare frequency and the amplitude of the field applied on the cavity.The efficiency of this engine obtains a maximum value up to 47% in the regime of operation used.We also wanted to look for the role played by the different types of coherences, present at the WS, on the behavior of the engine and its efficiency.By different types of coherence we mean the so called modes of coherence, whose definition is based on how they respond to symmetry transformations.We did that for the trivial case of the qubit, that only contains the modes 1 and -1, and that has shown to be extremely important for the efficiency of the machine.The same procedure was repeated for a 3-level system WS.The modes 1 and -1 was again very important, not only to the absolute value of the engine's efficiency but to the regime of operation of the machine.The additional modes, 2 and -2, had a negative impact on the efficiency, reducing its absolute value.This result appears to show some evidences that quantumness won't necessarily bring improvements to the operation of those machines.
Conventional heat engines convert thermal energy into mechanical work by using a working medium such as steam or gas that operates between a hot and a cold reservoir. The medium absorbs heat from the hot reservoir, produces work, then releases some heat to the cold reservoir and returns to the initial state. With the advancement of quantum technologies, researchers strive to understand whether quantum media, such as atoms, spins, superconducting circuits and semiconductor quantum dots, can be used in quantum counterparts of the classical heat engines. After a recap of the basics of classical heat engines, this review explores the theoretical foundations and advancements of quantum heat engines, focusing on the proposed two- and multilevel systems used as the working medium for the quantum Otto cycle, which is the ideal thermodynamic cycle that describes the operation of a spark-ignition internal combustion engine. The review compares the efficiency and the work extraction of these systems, discussing their performance in the high- and low-temperature limits. Alternative cycles and engines are also presented to establish the adaptability of the working media when operating under different processes and non-equilibrium conditions. In conclusion, the review offers possible applications and future developments of quantum heat engines.