Transpilation, particularly noise-aware optimization, is widely regarded as essential for maximizing the performance of quantum circuits on superconducting quantum computers. The common wisdom is that each circuit should be transpiled using up-to-date noise calibration data to optimize fidelity. In this work, we revisit the necessity of frequent noise-adaptive transpilation, conducting an in-depth empirical study across five IBM 127-qubit quantum computers and 16 diverse quantum algorithms. Our findings reveal novel and interesting insights: (1) noise-aware transpilation leads to a heavy concentration of workloads on a small subset of qubits, which increases output error variability; (2) using random mapping can mitigate this effect while maintaining comparable average fidelity; and (3) circuits compiled once with calibration data can be reliably reused across multiple calibration cycles and time periods without significant loss in fidelity. These results suggest that the classical overhead associated with daily, per-circuit noise-aware transpilation may not be justified. We propose lightweight alternatives that reduce this overhead without sacrificing fidelity – offering a path to more efficient and scalable quantum workflows.
Transpilation, particularly noise-aware optimization, is widely regarded as essential for maximizing the performance of quantum circuits on superconducting quantum computers. The common wisdom is that each circuit should be transpiled using up-to-date noise calibration data to optimize fidelity. In this work, we revisit the necessity of frequent noise-adaptive transpilation, conducting an in-depth empirical study across five IBM 127-qubit quantum computers and 16 diverse quantum algorithms. Our findings reveal novel and interesting insights: (1) noise-aware transpilation leads to a heavy concentration of workloads on a small subset of qubits, which increases output error variability; (2) using random mapping can mitigate this effect while maintaining comparable average fidelity; and (3) circuits compiled once with calibration data can be reliably reused across multiple calibration cycles and time periods without significant loss in fidelity. These results suggest that the classical overhead associated with daily, per-circuit noise-aware transpilation may not be justified. We propose lightweight alternatives that reduce this overhead without sacrificing fidelity – offering a path to more efficient and scalable quantum workflows.
Today’s Noisy Intermediate-Scale Quantum (NISQ) computers support only limited sets of available quantum gates and restricted connectivity. Therefore, quantum algorithms must be transpiled in order to become executable on a given NISQ computer; transpilation is a complex and computationally heavy process. Moreover, NISQ computers are affected by noise that changes over time, and periodic calibration provides relevant error rates that should be considered during transpilation. Variational algorithms, which form one main class of computations on NISQ platforms, produce a number of similar yet not identical quantum "ansatz" circuits. In this work, we present a transpilation methodology optimized for variational algorithms under potentially changing error rates. We divide transpilation into three steps: (1) noise-unaware and computationally heavy pre-transpilation; (2) fast noise-aware matching; and (3) fast decomposition followed by heuristic optimization. For a complete run of a variational algorithm under constant error rates, only step (3) needs to be executed for each new ansatz circuit. Step (2) is required only if the error rates reported by calibration have changed significantly since the beginning of the computation. The most expensive Step (1) is executed only once for the whole run. This distribution is helpful for incremental, calibration-aware transpilation when the variational algorithm adapts its own execution to changing error rates. Experimental results on IBM’s quantum computer show the low latency and robust results obtained by calibration-aware transpilation.
The rapid advancement of Noisy Intermediate-Scale Quantum (NISQ) devices has driven the need for efficient design automation tools that can translate complex engineering models into executable quantum circuits. This study explores the development of automated quantum circuit design frameworks focused on gate optimization and noise-aware compilation, enabling practical quantum computation for engineering applications such as optimization, simulation, and control systems. Traditional circuit design methods often fail to account for hardware constraints, decoherence, and gate infidelity, which significantly affect computational accuracy on NISQ devices. To address these challenges, this research introduces a hybrid automation approach combining quantum transpilation, variational circuit pruning, and error-aware synthesis algorithms to enhance circuit reliability and scalability. The framework integrates quantum-classical co-design principles to optimize both logical and physical circuit layers, leveraging hardware-specific calibration data to adapt compilation strategies dynamically. Through simulations and benchmark analysis, the proposed system demonstrates significant improvements in quantum resource utilization, error mitigation, and gate depth reduction compared to conventional compilation methods. This work underscores the growing importance of design automation in quantum engineering, where algorithmic efficiency must be harmonized with physical constraints to realize functional and scalable quantum workflows. By establishing a methodology for gate-level optimization and noise-adaptive design, the study contributes to bridging the gap between theoretical quantum algorithms and real-world engineering implementations within the NISQ computing era.
Running quantum programs is fraught with challenges on on today's noisy intermediate scale quantum (NISQ) devices. Many of these challenges originate from the error characteristics that stem from rapid decoherence and noise during measurement, qubit connections, crosstalk, the qubits themselves, and transformations of qubit state via gates. Not only are qubits not “created equal”, but their noise level also changes over time. IBM is said to calibrate their quantum systems once per day and reports noise levels (errors) at the time of such calibration. This information is subsequently used to map circuits to higher quality qubits and connections up to the next calibration point. This work provides evidence that there is room for improvement over this daily calibration cycle. It contributes a technique to measure noise levels (errors) related to qubits immediately before executing one or more sensitive circuits and shows that just-in-time noise measurements can benefit late physical qubit mappings. With this just-in-time recalibrated transpilation, the fidelity of results is improved over IBM's default mappings, which only uses their daily calibrations. The framework assess two major sources of noise, namely readout errors (measurement errors) and two-qubit gate/connection errors. Experiments indicate that the accuracy of circuit results improves by 3-304% on average and up to 400% with on-the-fly circuit mappings based on error measurements just prior to application execution.
Quantum computers in the Noisy Intermediate-Scale Quantum (NISQ) era face significant challenges due to inherent noise and limited qubit coherence. Accurate fidelity evaluation of quantum states necessitates multiple repeated measurements to obtain statistical results. But determining the optimal number of measurements remains an open problem due to the dynamic, device-dependent nature of quantum noise. Existing methods either assume prior knowledge of the noise model or inherently employ a fixed measurement strategy, which limits their applicability in practical deployment scenarios. This paper presents AutoFid, an adaptive and noise-aware fidelity measurement framework that automatically determines the number of required tests based on circuit structure and hardware feedback. AutoFid models quantum circuits as Directed Acyclic Graphs and estimates structural complexity via random walks, enabling estimation of measurement effort. It further incorporates transpilation-aware features such as gate fidelity, depth inflation, and crosstalk to refine iteration budgets. During runtime, AutoFid dynamically samples fidelity results and employs an early stopping strategy based on confidence intervals to reduce redundant measurements while preserving accuracy guarantees. We evaluate AutoFid on 18 quantum benchmarks executed on real IBMQ hardware platforms. Experimental results show that AutoFid reduces measurement costs by more than 50% compared to both fixed-shot and learning-based baselines, while consistently maintaining fidelity bias below 0.01. Additional analysis using classical software testing metrics and ablation studies demonstrate its effectiveness, robustness, and adaptability across a wide range of quantum workloads.
Reliably executing quantum algorithms on noisy intermediate-scale quantum (NISQ) devices is challenging, as they are severely constrained and prone to errors. Efficient quantum circuit compilation techniques are therefore crucial for overcoming their limitations and dealing with their high error rates. These techniques consider the quantum hardware restrictions, such as the limited qubit connectivity, and perform some transformations to the original circuit that can be executed on a given quantum processor. Certain compilation methods use error information based on calibration data to further improve the success probability or the fidelity of the circuit to be run. However, it is uncertain to what extent incorporating calibration information in the compilation process can enhance the circuit performance. For instance, considering the most recent error data provided by vendors after calibrating the processor might not be functional enough as quantum systems are subject to drift, making the latest calibration data obsolete within minutes. In this paper, we explore how different usage of calibration data impacts the circuit fidelity, by using several compilation techniques and quantum processors (IBM Perth and Brisbane). To this aim, we implemented a framework that incorporates some of the state-of-the-art noise-aware and non-noise-aware compilation techniques and allows the user to perform fair comparisons under similar processor conditions. Our experiments yield valuable insights into the effects of noise-aware methodologies and the employment of calibration data. The main finding is that pre-processing historical calibration data can improve fidelity when real-time calibration data is not available due to factors such as cloud service latency and waiting queues between compilation and execution on the quantum backend.
Quantum computing promises to solve complex problems beyond the capabilities of classical computers. However, the practical implementation of quantum algorithms on Noisy Intermediate-Scale Quantum (NISQ) devices is significantly challenged by various noise sources that degrade computational fidelity. Transpilation—the process of converting high-level quantum circuits into optimized, hardware-specific instructions—plays a crucial role in mitigating these noise effects. In this paper, we present a comprehensive study on enhancing noise resilience in quantum algorithms through advanced transpilation techniques, evaluated using the SupermarQ benchmarking suite. By systematically analyzing the impact of different optimization levels in Qiskit’s transpiler on a diverse set of quantum algorithms, we demonstrate how specific transpilation strategies influence key performance metrics related to noise resilience. Our results show that higher optimization levels can improve metrics such as Liveness (LV) and Parallelism (PL), leading to more reliable quantum computations on NISQ hardware. This work contributes to the development of noise-adaptive transpilation methods that incorporate noise characteristics into the optimization process, ultimately enhancing the practical viability of quantum algorithms.