Today’s Noisy Intermediate-Scale Quantum (NISQ) computers support only limited sets of available quantum gates and restricted connectivity. Therefore, quantum algorithms must be transpiled in order to become executable on a given NISQ computer; transpilation is a complex and computationally heavy process. Moreover, NISQ computers are affected by noise that changes over time, and periodic calibration provides relevant error rates that should be considered during transpilation. Variational algorithms, which form one main class of computations on NISQ platforms, produce a number of similar yet not identical quantum "ansatz" circuits. In this work, we present a transpilation methodology optimized for variational algorithms under potentially changing error rates. We divide transpilation into three steps: (1) noise-unaware and computationally heavy pre-transpilation; (2) fast noise-aware matching; and (3) fast decomposition followed by heuristic optimization. For a complete run of a variational algorithm under constant error rates, only step (3) needs to be executed for each new ansatz circuit. Step (2) is required only if the error rates reported by calibration have changed significantly since the beginning of the computation. The most expensive Step (1) is executed only once for the whole run. This distribution is helpful for incremental, calibration-aware transpilation when the variational algorithm adapts its own execution to changing error rates. Experimental results on IBM’s quantum computer show the low latency and robust results obtained by calibration-aware transpilation.
Today’s Noisy Intermediate-Scale Quantum (NISQ) computers support only limited sets of available quantum gates and restricted connectivity. Therefore, quantum algorithms must be transpiled in order to become executable on a given NISQ computer; transpilation is a complex and computationally heavy process. Moreover, NISQ computers are affected by noise that changes over time, and periodic calibration provides relevant error rates that should be considered during transpilation. Variational algorithms, which form one main class of computations on NISQ platforms, produce a number of similar yet not identical quantum "ansatz" circuits. In this work, we present a transpilation methodology optimized for variational algorithms under potentially changing error rates. We divide transpilation into three steps: (1) noise-unaware and computationally heavy pre-transpilation; (2) fast noise-aware matching; and (3) fast decomposition followed by heuristic optimization. For a complete run of a variational algorithm under constant error rates, only step (3) needs to be executed for each new ansatz circuit. Step (2) is required only if the error rates reported by calibration have changed significantly since the beginning of the computation. The most expensive Step (1) is executed only once for the whole run. This distribution is helpful for incremental, calibration-aware transpilation when the variational algorithm adapts its own execution to changing error rates. Experimental results on IBM’s quantum computer show the low latency and robust results obtained by calibration-aware transpilation.
Reliably executing quantum algorithms on noisy intermediate-scale quantum (NISQ) devices is challenging, as they are severely constrained and prone to errors. Efficient quantum circuit compilation techniques are therefore crucial for overcoming their limitations and dealing with their high error rates. These techniques consider the quantum hardware restrictions, such as the limited qubit connectivity, and perform some transformations to the original circuit that can be executed on a given quantum processor. Certain compilation methods use error information based on calibration data to further improve the success probability or the fidelity of the circuit to be run. However, it is uncertain to what extent incorporating calibration information in the compilation process can enhance the circuit performance. For instance, considering the most recent error data provided by vendors after calibrating the processor might not be functional enough as quantum systems are subject to drift, making the latest calibration data obsolete within minutes. In this paper, we explore how different usage of calibration data impacts the circuit fidelity, by using several compilation techniques and quantum processors (IBM Perth and Brisbane). To this aim, we implemented a framework that incorporates some of the state-of-the-art noise-aware and non-noise-aware compilation techniques and allows the user to perform fair comparisons under similar processor conditions. Our experiments yield valuable insights into the effects of noise-aware methodologies and the employment of calibration data. The main finding is that pre-processing historical calibration data can improve fidelity when real-time calibration data is not available due to factors such as cloud service latency and waiting queues between compilation and execution on the quantum backend.
The rapid advancement of Noisy Intermediate-Scale Quantum (NISQ) devices has driven the need for efficient design automation tools that can translate complex engineering models into executable quantum circuits. This study explores the development of automated quantum circuit design frameworks focused on gate optimization and noise-aware compilation, enabling practical quantum computation for engineering applications such as optimization, simulation, and control systems. Traditional circuit design methods often fail to account for hardware constraints, decoherence, and gate infidelity, which significantly affect computational accuracy on NISQ devices. To address these challenges, this research introduces a hybrid automation approach combining quantum transpilation, variational circuit pruning, and error-aware synthesis algorithms to enhance circuit reliability and scalability. The framework integrates quantum-classical co-design principles to optimize both logical and physical circuit layers, leveraging hardware-specific calibration data to adapt compilation strategies dynamically. Through simulations and benchmark analysis, the proposed system demonstrates significant improvements in quantum resource utilization, error mitigation, and gate depth reduction compared to conventional compilation methods. This work underscores the growing importance of design automation in quantum engineering, where algorithmic efficiency must be harmonized with physical constraints to realize functional and scalable quantum workflows. By establishing a methodology for gate-level optimization and noise-adaptive design, the study contributes to bridging the gap between theoretical quantum algorithms and real-world engineering implementations within the NISQ computing era.
Noisy and Intermediate-Scale Quantum, or NISQ, processors are sensitive to noise, prone to quantum decoherence, and are not yet capable of continuous quantum error correction for fault-tolerant quantum computation. Hence, quantum algorithms designed in the pre-faulttolerant era cannot neglect the noisy nature of the hardware, and investigating the relationship between quantum hardware performance and the output of quantum algorithms is essential. In this work, we experimentally study how hardware-aware variational quantum circuits on a superconducting quantum processing unit can model distributions relevant to specific use-case applications for Credit Risk Analysis, e.g., standard Gaussian distributions for latent factor loading in the Gaussian Conditional- Independence model. We use a transpilation technique tailored to the specific quantum hardware topology, which minimizes gate depth and connectivity violations, and we calibrate the gate rotations of the circuit to achieve an optimized output from quantum algorithms. Our results demonstrate the viability of quantum adaptation on a small scale, proof-of-concept model inspired by financial applications and offer a good starting point for understanding the practical use of NISQ devices.
Running quantum programs is fraught with challenges on on today's noisy intermediate scale quantum (NISQ) devices. Many of these challenges originate from the error characteristics that stem from rapid decoherence and noise during measurement, qubit connections, crosstalk, the qubits themselves, and transformations of qubit state via gates. Not only are qubits not “created equal”, but their noise level also changes over time. IBM is said to calibrate their quantum systems once per day and reports noise levels (errors) at the time of such calibration. This information is subsequently used to map circuits to higher quality qubits and connections up to the next calibration point. This work provides evidence that there is room for improvement over this daily calibration cycle. It contributes a technique to measure noise levels (errors) related to qubits immediately before executing one or more sensitive circuits and shows that just-in-time noise measurements can benefit late physical qubit mappings. With this just-in-time recalibrated transpilation, the fidelity of results is improved over IBM's default mappings, which only uses their daily calibrations. The framework assess two major sources of noise, namely readout errors (measurement errors) and two-qubit gate/connection errors. Experiments indicate that the accuracy of circuit results improves by 3-304% on average and up to 400% with on-the-fly circuit mappings based on error measurements just prior to application execution.
Transpilation, particularly noise-aware optimization, is widely regarded as essential for maximizing the performance of quantum circuits on superconducting quantum computers. The common wisdom is that each circuit should be transpiled using up-to-date noise calibration data to optimize fidelity. In this work, we revisit the necessity of frequent noise-adaptive transpilation, conducting an in-depth empirical study across five IBM 127-qubit quantum computers and 16 diverse quantum algorithms. Our findings reveal novel and interesting insights: (1) noise-aware transpilation leads to a heavy concentration of workloads on a small subset of qubits, which increases output error variability; (2) using random mapping can mitigate this effect while maintaining comparable average fidelity; and (3) circuits compiled once with calibration data can be reliably reused across multiple calibration cycles and time periods without significant loss in fidelity. These results suggest that the classical overhead associated with daily, per-circuit noise-aware transpilation may not be justified. We propose lightweight alternatives that reduce this overhead without sacrificing fidelity – offering a path to more efficient and scalable quantum workflows.
Abstract Noisy Intermediate-Scale Quantum (NISQ) devices are near-term quantum computing devices that inherently suffer from imperfect gate implementation, decoherence, and measurement noise. The main type of variational quantum algorithms(VQAs) is based on Parameterized Quantum Circuits (PQCs), which, however, face practical challenges due to optimization instability of optimization caused by noise and reduced performance. In this paper, we suggest a comprehensive noise-resilient optimization framework for PQCs, which explicitly incorporates noise-resilient circuit architecture design, incorporating noise-aware training strategies into the variational optimization loop. The framework uses circuit structures that are efficient in depth and are hardware compatible in addition to adaptive optimizer choice, stochastic optimization, and averaging as a part of repeated measurement to reduce the impacts of realistic noise. Large-scale experiments are performed with different amounts of qubits, depths of the circuit and noise strengths with realistic noise models. The findings indicate that the convergence rate is faster, the stability is increased, the variability of run-to-run variability is minimized, and other robustness is better than the noise-unaware optimization techniques. Moreover, systematic studies determine optimal operating regions that optimally trade-off expressibility and noise tolerance to offer useful design advice on trusted implementation of VQAs with near-term quantum hardware.