Model calculation (SIMULATED, NOT MEASURED) of the energy budget of quantum error correction for a rotated surface-code architecture. At a physical error rate of 0.001 per operation, reaching a logical error probability of 1e-12 per syndrome cycle requires code distance 27 and 1457 physical qubits per logical qubit. Combining the cryogenic load, evaluated with the refrigerator coefficient-of-performance penalty at 4 K and at 15 mK, with room-temperature control and decoding power gives 3.94 W per physical qubit, 5741 W per logical qubit, and 0.155 J per logical operation at a 1 microsecond syndrome cycle time. This is an overhead of about 7.7e9 relative to a practical classical operation at 20 pJ. Room-temperature control and decoding dominate the budget. All numbers are produced by the deposited computation script.
Model calculation (SIMULATED, NOT MEASURED) of the energy budget of quantum error correction for a rotated surface-code architecture. At a physical error rate of 0.001 per operation, reaching a logical error probability of 1e-12 per syndrome cycle requires code distance 27 and 1457 physical qubits per logical qubit. Combining the cryogenic load, evaluated with the refrigerator coefficient-of-performance penalty at 4 K and at 15 mK, with room-temperature control and decoding power gives 3.94 W per physical qubit, 5741 W per logical qubit, and 0.155 J per logical operation at a 1 microsecond syndrome cycle time. This is an overhead of about 7.7e9 relative to a practical classical operation at 20 pJ. Room-temperature control and decoding dominate the budget. All numbers are produced by the deposited computation script.
Abstract Practical quantum computing will require error rates well below those achievable with physical qubits. Quantum error correction 1,2 offers a path to algorithmically relevant error rates by encoding logical qubits within many physical qubits, for which increasing the number of physical qubits enhances protection against physical errors. However, introducing more qubits also increases the number of error sources, so the density of errors must be sufficiently low for logical performance to improve with increasing code size. Here we report the measurement of logical qubit performance scaling across several code sizes, and demonstrate that our system of superconducting qubits has sufficient performance to overcome the additional errors from increasing qubit number. We find that our distance-5 surface code logical qubit modestly outperforms an ensemble of distance-3 logical qubits on average, in terms of both logical error probability over 25 cycles and logical error per cycle ((2.914 ± 0.016)% compared to (3.028 ± 0.023)%). To investigate damaging, low-probability error sources, we run a distance-25 repetition code and observe a 1.7 × 10 −6 logical error per cycle floor set by a single high-energy event (1.6 × 10 −7 excluding this event). We accurately model our experiment, extracting error budgets that highlight the biggest challenges for future systems. These results mark an experimental demonstration in which quantum error correction begins to improve performance with increasing qubit number, illuminating the path to reaching the logical error rates required for computation.
Abstract Scalable solutions are essential to achieving the long-term goal of building a fault-tolerant quantum computer and energy-power consumption are fundamental limiting factors for this target. Among the available types of silicon qubits, this work focuses on Flip-Flop (FF) qubits. Energy consumption and power requirements are estimated for a square array of qubits that hosts the logical qubit. The logical qubit is implemented using the rotated Surface Code (SC) for Quantum Error Correction (QEC). By using a universal set of quantum gates, the energy usage, time and power requirements for a SC cycle are estimated based on noise level, code distance and control levels. These estimates are used to provide insights into the main scaling-up challenges for quantum computer development. This is achieved by extending a thermal model that includes energy contributions from both the cryogenic components (such as the qubit array, the cryogenic control electronics, and the cryostat) and the room temperature (RT) section (RT electronics and heat dissipation systems). The maximum numbers of physical and logical qubits are provided, as well as power consumption across the different temperature sections.
Surface-code quantum error correction (QEC) is pivotal for fault-tolerant quantum computing, but its energy efficiency remains underexplored. This work derives a practical lower bound on the energy cost per logical-qubit operation, accounting for gate-fidelity decay's impact on code distance and physical-qubit overhead. By modeling the energy consumption of gate operations and error correction, we express the total cost as $ E = (E_g N_g + E_c N_c)/N_l $, where $ E_g $, $ E_c $, $ N_g $, $ N_c $, and $ N_l $ represent gate and physical-qubit energy costs, gate counts, physical-qubit counts, and logical qubit counts, respectively. Gate-fidelity decay increases the required code distance $ d $, scaling $ N_c $ and thus $ E $. We propose normalizing computational cost in joules per logical-qubit operation (JPCUB), isolating logical work from error-correction overhead. Quantitative predictions for $ E_g $, $ E_c $, and $ N_c $ remain [to verify], but the functional dependence on $ d $ and gate fidelities is established. This framework informs energy-efficient QEC design and benchmarks. ## 1. Introduction Surface codes enable fault-tolerant quantum computation by encoding logical qubits in a 2D lattice of physical qubits, correcting errors through syndrome measurements. However, the energy cost per logical operation—critical for scalability—remains poorly quantified. While theoretical foundations exist (Raussendorf & Terhal, 2006; Kitaev, 2003), prior work focuses on error-correction thresholds rather than energy efficiency. Here, we address this gap by deriving a lower bound on energy cost, considering how gate-fidelity decay necessitates larger code distances $ d $, increasing physical-qubit overhead $ N_c $. This analysis connects to the joules-per-compute (JPCUB) benchmark, advocating for energy normalization per logical qubit to disentangle computational work from error-correction costs. ## 2. Background Surface codes encode logical qubits using a 2D grid of
Quantum error correction [1, 2, 3, 4] provides a path to reach practical quantum computing by combining multiple physical qubits into a logical qubit, where the logical error rate is suppressed exponentially as more qubits are added. However, this exponential suppression only occurs if the physical error rate is below a critical threshold. Here, we present two below-threshold surface code memories on our newest generation of superconducting processors, Willow: a distance-7 code, and a distance-5 code integrated with a real-time decoder. The logical error rate of our larger quantum memory is suppressed by a factor of Λ=2.14±0.02 when increasing the code distance by two, culminating in a 101-qubit distance-7 code with 0.143% ± 0.003% error per cycle of error correction. This logical memory is also beyond break-even, exceeding its best physical qubit’s lifetime by a factor of 2.4±0.3 . Our system maintains below-threshold performance when decoding in real time, achieving an average decoder latency of 63 μs at distance-5 up to a million cycles, with a cycle time of 1.1 μs. We also run repetition codes up to distance-29 and find that logical performance is limited by rare correlated error events occurring approximately once every hour, or 3×109 cycles. Our results present device performance that, if scaled, could realize the operational requirements of large scale fault-tolerant quantum algorithms.
Semiconductor spin qubits offer a promising route to compact and scalable quantum computers, combining long coherence times in isotopically purified silicon with compatibility with semiconductor manufacturing. Beyond computational speedup, their energy efficiency is an important consideration for future large-scale systems. We evaluate the power and energy requirements of a Loss-DiVincenzo spin-qubit quantum computer by analyzing the Quantum Fourier Transform (QFT) and benchmarking it against the classical Fast Fourier Transform (FFT). We develop a detailed energy budget, identifying cryogenic cooling as the dominant baseline contribution before quantum error correction (QEC). The comparison between the QFT and the classical FFT reveals that, for any quantum workload operating under a polynomially bounded sampling regime, the crossover in energy consumption occurs at smaller problem sizes than the crossover in execution time. Thus, quantum computing can become energetically competitive before achieving a speedup in execution time. We then incorporate surface-code QEC and analyze the energy costs of QEC cycles, gate synthesis, and decoding. At scale, instrumentation and decoding become dominant contributions, while cryogenic cooling imposes a constraint on scalability. We show that optimizing the control-signal demultiplexing ratio can reduce the overall energy cost by approximately two orders of magnitude. For a system with about one million physical qubits, we estimate a power consumption of approximately 100 kW, at least one order of magnitude below that of today's highest-performance classical computing systems.