Abstract Hardware Error Outputs of Quantum Computing Not Reliable because of Hardware Calibration Drift, Measurement Noise, Gate Errors on NISQ Systems. Even though MEMs, ZNEs, and CDRs slightly increase output accuracy, they operate under the assumption of static noise, therefore they do not account for changing output of the NISQ devices in real-time. The limitations of MEMs, ZNEs, and CDRs can be overcome by using the Hybrid Adaptive Error Mitigation (HAEM) method proposed in this article that has the capability to combine baseline measurement-error mitigation with Real-time Calibration Circuits and Lightweight-Machine-learning algorithms for adaptive error-correcting and increasing the overall output integrity of quantum devices affected by fluctuations in noise. The application of the HAEM method will utilize Qiskit Runtime to develop, implement, and validate the Hybrid Adaptive Error Mitigation method through testing using controlled noisy simulated environments based on the characteristics of current advanced NISQ quantum computers. The results of the tests demonstrate the HAEM architecture provides a higher level of accuracy and fidelity than static and non-mitigated executions ("mitigated execution vs. HAEM execution"), providing an increase of up to thirty-four percent in fidelity under high-noise conditions with minimal computational overhead. The results demonstrate that the use of adaptive and data-driven mitigation techniques, like those used in the Hybrid Adaptive Error Mitigation method, are an efficient way to increase the accuracy of quantum computations.
Abstract Hardware Error Outputs of Quantum Computing Not Reliable because of Hardware Calibration Drift, Measurement Noise, Gate Errors on NISQ Systems. Even though MEMs, ZNEs, and CDRs slightly increase output accuracy, they operate under the assumption of static noise, therefore they do not account for changing output of the NISQ devices in real-time. The limitations of MEMs, ZNEs, and CDRs can be overcome by using the Hybrid Adaptive Error Mitigation (HAEM) method proposed in this article that has the capability to combine baseline measurement-error mitigation with Real-time Calibration Circuits and Lightweight-Machine-learning algorithms for adaptive error-correcting and increasing the overall output integrity of quantum devices affected by fluctuations in noise. The application of the HAEM method will utilize Qiskit Runtime to develop, implement, and validate the Hybrid Adaptive Error Mitigation method through testing using controlled noisy simulated environments based on the characteristics of current advanced NISQ quantum computers. The results of the tests demonstrate the HAEM architecture provides a higher level of accuracy and fidelity than static and non-mitigated executions ("mitigated execution vs. HAEM execution"), providing an increase of up to thirty-four percent in fidelity under high-noise conditions with minimal computational overhead. The results demonstrate that the use of adaptive and data-driven mitigation techniques, like those used in the Hybrid Adaptive Error Mitigation method, are an efficient way to increase the accuracy of quantum computations.
Abstract Quantum computing has recently emerged as a novel paradigm for solving problems otherwise intractable on classical computers, yet the practical progress of quantum computers is severely impacted by noise, decoherence, and imperfect gate operations in Noisy Intermediate-Scale Quantum (NISQ) devices. Specific to IBM Quantum hardware, imperfections due to readout error, gate errors, and device drift, which depends on time, resolves limits for the accuracy of outputs from our algorithms. The mitigation strategies currently used, for example, Measurement Error Mitigation (MEM), Zero Noise Extrapolation (ZNE), and Clifford Data Regression (CDR), offer improvement over raw, unmitigated outputs, but they are static and not dynamic; the reduction of noise in within an NISQ device is temporal and can vary in patterns that are non-zero. In addition to this, using the conventional methods provides inconsistent and suboptimal results.This study will provide enhanced reliability with respect to performing quantum computation on IBM Quantum hardware with a unique mitigation framework that is adaptive and computationally efficient for a high-fidelity output. The problem taken on here is the failure of existing error mitigation strategies to provide adaptive noise compensation, as they assume a statically-distributed error, despite the performance-related characteristics already being documented in regards to calibration drift and variation over time.To achieve this, we propose a Hybrid Adaptive Error Mitigation (HAEM) approach that includes baseline measurement error mitigation and an additional correction layer that utilizes realtime calibration information, along with lightweight machine learning models. The approach can be broken down into three steps: (i) perform standard measurement error mitigation to reduce classical readout noise, (ii) execute compact calibration circuits, such as Bell states, GHZ states and Clifford benchmarks to capture then current error profile of the device, and (iii) use a lightweight machine learning model (having been trained on historical and newest calibration data) to dynamically change the mitigation weights applied for the target quantum algorithm. All implementation is done using Qiskit Runtime to ensure low-latency execution, and we completed experiments on both Qiskit Aer noisy simulators and IBM Quantum devices.Initial results suggest HAEM improved the outputs of quantum algorithms' fidelity compared to the unmitigated runs and the baseline measurement error mitigation (MEM) runs. On the noisy simulators, HAEM increased fidelity from a raw performance of 0.65 to 0.87, nearly a 34% improvement. In fairer hardware-like scenarios, fidelity-on-average was persistently 12% better than MEM, with nearly equal time duration for the additional adaptive measurements. The adaptive aspect of HAEM consistently supported subsequent calibration cycles of the device and was effective to continue providing fidelity improvements despite the static mitigation performance degrading.To sum up, the proposed HAEM framework is a modern and viable alternative for error mitigation which brings together the benefits of baseline approaches with corrections that are driven by fixed-function error-corrective, adaptive learning. As both learning-based and standard baseline approaches can only achieve fixed levels of performance, HAEM, through its use of noise mitigation both at execution time and through correlating it with standard data, provides a route towards reliable quantum computations on current IBM hardware. HAEM also presents a contribution to the NISQ error-resilient landscape, and however it is intended that it will continue to improve future applications of hybrid workflows of quantum and classical computation where error mitigation and resilience is important.
Quantum computing offers exponential advantages for problems in cryptography, optimization, and quantum simulation, yet the practicality of current Noisy Intermediate-Scale Quantum (NISQ) devices is severely constrained by decoherence, gate imperfections, and measurement noise. Conventional quantum error correction (QEC) codes such as Steane and surface codes impose large qubit overheads and require high-fidelity logical operations, making them unsuitable for near-term hardware. To address this gap, this work introduces ML-QEM, an adaptive quantum error mitigation framework that employs machine learning to identify and correct dominant Pauli error patterns in real time using only 3–5 ancillary qubits. By integrating Qiskit Aer noise modeling with a lightweight TensorFlow-based classifier, ML-QEM learns device-specific noise characteristics and applies targeted recovery operations with minimal latency. Evaluations across depolarizing, amplitude damping, and thermal relaxation noise models demonstrate a 28.4% average fidelity improvement, 60–84% lower overhead than Steane and surface codes, and a classical processing delay of only 21.7 ms. ML-QEM thus provides an effective and resource-efficient pathway toward enhancing quantum computation fidelity in the NISQ era.
Abstract The practical application of Noisy Intermediate-Scale Quantum (NISQ) hardware is fundamentally limited by gate-level noise, which corrupts computational results. This research addresses this challenge through the development and validation of a modular software framework for Quantum Error Mitigation (QEM). We implement and compare two leading QEM strategies: Zero-Noise Extrapolation (ZNE) and Probabilistic Error Cancellation (PEC). The framework is built using the Qiskit library and is validated using a realistic, hardware-calibrated noisy simulator that mimics the error characteristics of a real IBM Quantum device. Our methodology focuses on a robust implementation of ZNE via unitary folding and a proof-of-concept demonstration of the PEC algorithm. The framework's effectiveness is demonstrated on a simulated noisy backend where, for a 3-qubit Greenberger-Horne-Zeilinger (GHZ) state, the baseline state fidelity was increased from 93.5% to 97.3% via ZNE, corresponding to a 59% reduction in the state's infidelity. This work provides a practical demonstration of how software-based error mitigation can enhance the reliability of quantum computations on current noisy hardware.
Quantum error mitigation (QEM) bridges the gap between today's noisy NISQ hardware and fault-tolerant quantum computing by reducing the effect of hardware errors on expectation value estimates without the qubit overhead of full quantum error correction. This paper proposes the Quantum Error Mitigation Design (QEMD) framework, a systematic evaluation of six QEM techniques across four circuit families on IBM Quantum Eagle and IonQ Forte: Zero-Noise Extrapolation (ZNE), Probabilistic Error Cancellation (PEC), Clifford Data Regression (CDR), Symmetry Verification (SV), Dynamical Decoupling (DD), and a novel Adaptive Ensemble Mitigation (AEM) combining ZNE and CDR with context-aware technique selection. QEMD finds: ZNE 3-point Richardson provides the best cost-performance trade-off for QAOA and VQE circuits (4.8x overhead, 28.4pp error reduction); PEC provides the highest accuracy but at 48x shot overhead -- practical only for n <= 12; DD reduces coherence-limited errors by 18.4% on IonQ Forte at zero shot overhead; AEM outperforms all individual techniques by 6.4pp at 8.4x overhead. QEMD provides a decision guide mapping circuit type, qubit count, and shot budget to optimal QEM technique selection.
Abstract Quantum Error Mitigation (QEM) enables the extraction of high-quality results from the presently-available noisy quantum computers. In this approach, the effect of the noise on observables of interest can be mitigated using multiple measurements without additional hardware overhead. Unfortunately, current QEM techniques are limited to weak noise or lack scalability. In this work, we introduce a QEM method termed ‘Adaptive KIK’ that adapts to the noise level of the target device, and therefore, can handle moderate-to-strong noise. The implementation of the method is experimentally simple — it does not involve any tomographic information or machine-learning stage, and the number of different quantum circuits to be implemented is independent of the size of the system. Furthermore, we have shown that it can be successfully integrated with randomized compiling for handling both incoherent as well as coherent noise. Our method handles spatially correlated and time-dependent noise which enables us to run shots over the scale of days or more despite the fact that noise and calibrations change in time. Finally, we discuss and demonstrate why our results suggest that gate calibration protocols should be revised when using QEM. We demonstrate our findings in the IBM quantum computers and through numerical simulations.
Adaptive quantum computing control is important for the stability and efficiency of quantum systems, especially in the presence of dynamic environmental noise and hardware fluctuations. We present a unified strategy for machine learning (ML) techniques to improve adaptive quantum control in two main directions: optimization speed and out-of-sample error. Here, we propose a hybrid learning method combining reinforcement learning (RL), deep neural networks (DNNs), and quantum-inspired models to actively and adaptively update quantum gate parameters and error mitigation strategies on the fly. Embedding of quantum noise models directly into the learning allows the system to predict and correct for decoherence, gate errors and measurement inaccuracy before they affect computational fidelity. Using extensive simulations as well as experimental validation on noisy intermediate-scale quantum (NISQ) processors, our improved ML model achieves a substantially higher fidelity and robustness compared to standard model-free and static control approaches. We introduce a novel feedback-loop mechanism based on online learning algorithms enabling the system to adjust for changing noise profiles and hardware drift without retraining. The optimization part uses metaheuristic methods to quickly converge to control parameters that perform well, and the error prevention mechanism features anomaly detection and prediction correction layers to minimize the effects of cumulative decoherence. The results demonstrate that our adaptive control framework can be used to not only speed up the convergence in training quantum algorithms, but also sustain the performance of gates against error at a variety of error rates with the reduction of the real-time impact of the error up to 35 %. This work highlights the promise of machine learningaugmented quantum control for improving reliability and scalability in quantum computing and serves as a stepping stone for future incorporation with fault-tolerant designs.