A Novel Approach for Mitigating Gate- Level Noise in IBM Quantum Hardware via Zero Noise Extrapolation (ZNE) and Probabilistic Error Cancellation (PEC) Techniques
Abstract The practical application of Noisy Intermediate-Scale Quantum (NISQ) hardware is fundamentally limited by gate-level noise, which corrupts computational results. This research addresses this challenge through the development and validation of a modular software framework for Quantum Error Mitigation (QEM). We implement and compare two leading QEM strategies: Zero-Noise Extrapolation (ZNE) and Probabilistic Error Cancellation (PEC). The framework is built using the Qiskit library and is validated using a realistic, hardware-calibrated noisy simulator that mimics the error characteristics of a real IBM Quantum device. Our methodology focuses on a robust implementation of ZNE via unitary folding and a proof-of-concept demonstration of the PEC algorithm. The framework's effectiveness is demonstrated on a simulated noisy backend where, for a 3-qubit Greenberger-Horne-Zeilinger (GHZ) state, the baseline state fidelity was increased from 93.5% to 97.3% via ZNE, corresponding to a 59% reduction in the state's infidelity. This work provides a practical demonstration of how software-based error mitigation can enhance the reliability of quantum computations on current noisy hardware.
Abstract The practical application of Noisy Intermediate-Scale Quantum (NISQ) hardware is fundamentally limited by gate-level noise, which corrupts computational results. This research addresses this challenge through the development and validation of a modular software framework for Quantum Error Mitigation (QEM). We implement and compare two leading QEM strategies: Zero-Noise Extrapolation (ZNE) and Probabilistic Error Cancellation (PEC). The framework is built using the Qiskit library and is validated using a realistic, hardware-calibrated noisy simulator that mimics the error characteristics of a real IBM Quantum device. Our methodology focuses on a robust implementation of ZNE via unitary folding and a proof-of-concept demonstration of the PEC algorithm. The framework's effectiveness is demonstrated on a simulated noisy backend where, for a 3-qubit Greenberger-Horne-Zeilinger (GHZ) state, the baseline state fidelity was increased from 93.5% to 97.3% via ZNE, corresponding to a 59% reduction in the state's infidelity. This work provides a practical demonstration of how software-based error mitigation can enhance the reliability of quantum computations on current noisy hardware.
We propose a general framework for quantum error mitigation that combines and generalizes two techniques: probabilistic error cancellation (PEC) and zero-noise extrapolation (ZNE). Similar to PEC, the proposed method represents ideal operations as linear combinations of noisy operations that are implementable on hardware. However, instead of assuming a fixed level of hardware noise, we extend the set of implementable operations by noise scaling. By construction, this method encompasses both PEC and ZNE as particular cases and allows us to investigate a larger set of hybrid techniques. For example, gate extrapolation can be used to implement PEC without requiring knowledge of the device's noise model, e.g., avoiding gate-set tomography. Alternatively, probabilistic error reduction can be used to estimate expectation values at intermediate virtual noise strengths (below the hardware level), leading to partially mitigated results at a lower sampling cost. Moreover, multiple results obtained with different noise-reduction factors can be further postprocessed with ZNE to better approximate the zero-noise limit.
Quantum error mitigation (QEM) bridges the gap between today's noisy NISQ hardware and fault-tolerant quantum computing by reducing the effect of hardware errors on expectation value estimates without the qubit overhead of full quantum error correction. This paper proposes the Quantum Error Mitigation Design (QEMD) framework, a systematic evaluation of six QEM techniques across four circuit families on IBM Quantum Eagle and IonQ Forte: Zero-Noise Extrapolation (ZNE), Probabilistic Error Cancellation (PEC), Clifford Data Regression (CDR), Symmetry Verification (SV), Dynamical Decoupling (DD), and a novel Adaptive Ensemble Mitigation (AEM) combining ZNE and CDR with context-aware technique selection. QEMD finds: ZNE 3-point Richardson provides the best cost-performance trade-off for QAOA and VQE circuits (4.8x overhead, 28.4pp error reduction); PEC provides the highest accuracy but at 48x shot overhead -- practical only for n <= 12; DD reduces coherence-limited errors by 18.4% on IonQ Forte at zero shot overhead; AEM outperforms all individual techniques by 6.4pp at 8.4x overhead. QEMD provides a decision guide mapping circuit type, qubit count, and shot budget to optimal QEM technique selection.
Abstract Quantum computing has recently emerged as a novel paradigm for solving problems otherwise intractable on classical computers, yet the practical progress of quantum computers is severely impacted by noise, decoherence, and imperfect gate operations in Noisy Intermediate-Scale Quantum (NISQ) devices. Specific to IBM Quantum hardware, imperfections due to readout error, gate errors, and device drift, which depends on time, resolves limits for the accuracy of outputs from our algorithms. The mitigation strategies currently used, for example, Measurement Error Mitigation (MEM), Zero Noise Extrapolation (ZNE), and Clifford Data Regression (CDR), offer improvement over raw, unmitigated outputs, but they are static and not dynamic; the reduction of noise in within an NISQ device is temporal and can vary in patterns that are non-zero. In addition to this, using the conventional methods provides inconsistent and suboptimal results.This study will provide enhanced reliability with respect to performing quantum computation on IBM Quantum hardware with a unique mitigation framework that is adaptive and computationally efficient for a high-fidelity output. The problem taken on here is the failure of existing error mitigation strategies to provide adaptive noise compensation, as they assume a statically-distributed error, despite the performance-related characteristics already being documented in regards to calibration drift and variation over time.To achieve this, we propose a Hybrid Adaptive Error Mitigation (HAEM) approach that includes baseline measurement error mitigation and an additional correction layer that utilizes realtime calibration information, along with lightweight machine learning models. The approach can be broken down into three steps: (i) perform standard measurement error mitigation to reduce classical readout noise, (ii) execute compact calibration circuits, such as Bell states, GHZ states and Clifford benchmarks to capture then current error profile of the device, and (iii) use a lightweight machine learning model (having been trained on historical and newest calibration data) to dynamically change the mitigation weights applied for the target quantum algorithm. All implementation is done using Qiskit Runtime to ensure low-latency execution, and we completed experiments on both Qiskit Aer noisy simulators and IBM Quantum devices.Initial results suggest HAEM improved the outputs of quantum algorithms' fidelity compared to the unmitigated runs and the baseline measurement error mitigation (MEM) runs. On the noisy simulators, HAEM increased fidelity from a raw performance of 0.65 to 0.87, nearly a 34% improvement. In fairer hardware-like scenarios, fidelity-on-average was persistently 12% better than MEM, with nearly equal time duration for the additional adaptive measurements. The adaptive aspect of HAEM consistently supported subsequent calibration cycles of the device and was effective to continue providing fidelity improvements despite the static mitigation performance degrading.To sum up, the proposed HAEM framework is a modern and viable alternative for error mitigation which brings together the benefits of baseline approaches with corrections that are driven by fixed-function error-corrective, adaptive learning. As both learning-based and standard baseline approaches can only achieve fixed levels of performance, HAEM, through its use of noise mitigation both at execution time and through correlating it with standard data, provides a route towards reliable quantum computations on current IBM hardware. HAEM also presents a contribution to the NISQ error-resilient landscape, and however it is intended that it will continue to improve future applications of hybrid workflows of quantum and classical computation where error mitigation and resilience is important.
Recent hundred-qubit processors represent a significant hardware advancement, but current limitations prevent effective quantum error correction (QEC), necessitating reliance on quantum error mitigation (QEM) to enhance result fidelity from quantum computers. Our paper introduces a noise-aware folding technique that enhances Zero-Noise Extrapolation (ZNE) by leveraging the noise characteristics of target quantum hardware to fold circuits more efficiently. Unlike traditional ZNE approaches assuming uniform error distribution, our method redistributes noise using calibration data based on hardware noise models. By employing a noise-adaptive compilation method combined with our proposed folding mechanism, we enhance the ZNE accuracy of quantum gate-based computing using superconducting quantum computers. This paper highlights the uniqueness of our method, summarizes noise accumulation, presents the scaling algorithm, and compares the reliability of our method with those of existing models using linear extrapolation model. Experimental results show that compared to existing folding methods, our approach achieved up to a 23.6% improvement on quantum computer simulators and up to a 44.8% improvement on real quantum computers, with statistical confidence intervals indicating stable performance gains across circuit scales.
Error mitigation is essential for unlocking the full potential of quantum algorithms and accelerating the timeline toward quantum advantage. As quantum hardware progresses to push the boundaries of classical simulation, efficient and robust error mitigation methods are becoming increasingly important for producing accurate and reliable outputs. However, existing error-mitigation approaches face a fundamental tradeoff between practical performance and reliability: heuristic methods such as zero-noise extrapolation (ZNE) enjoy faster runtime but lack accuracy guarantees, while rigorous techniques such as probabilistic error cancellation (PEC) provide unbiased estimates at prohibitive computational cost. We introduce a characterization-based, rigorously-grounded quantum error mitigation and error suppression framework (QESEM) that resolves this tradeoff by leveraging the accuracy guarantees of quasi-probabilistic mitigation with dramatically reduced overhead. We explain the innovative methods underlying QESEM and demonstrate its capabilities in the largest utility-scale error mitigation experiment based on an unbiased method. This experiment simulates the kicked transverse field Ising model with far-from-Clifford parameters on an IBM Heron device. We further validate QESEM's versatility across arbitrary quantum circuits and devices through high-accuracy error-mitigated molecular VQE circuits executed on IBM Heron and IonQ trapped-ion devices. Compared with multiple variants of the widely used zero-noise extrapolation method, QESEM consistently achieves higher accuracy while avoiding the prohibitive runtime overhead associated with PEC. These results mark a significant step forward in accuracy and reliability for running quantum circuits on current devices across diverse applications. Finally, we provide projections of QESEM's performance on near-term devices toward quantum advantage.
With sub-threshold quantum error correction on quantum hardware still out of reach, quantum error mitigation methods are currently deemed an attractive option for implementing certain applications on near-term noisy quantum devices. One such application is quantum routing - the ability to map an incoming quantum signal into a superposition of paths. In this work, we use a 7-qubit IBM quantum device to experimentally deploy two promising quantum error mitigation methods, Zero-Noise Extrapolation (ZNE) and Probabilistic Error Cancellation (PEC), in the context of quantum routing. Importantly, beyond investigating the improved performance of quantum routing via ZNE and PEC separately, we also investigate the routing performance provided by the concatenation of these two error-mitigation methods. Our experimental results demonstrate that such concatenation leads a very significant performance improvement relative to implementation with no error mitigation. Indeed, an almost perfect performance in terms of fidelity of the output entangled paths is found. These new results reveal that with concatenated quantum error-mitigation embedded, useful quantum routing becomes feasible on current devices without the need for quantum error correction - opening up a potential implementation pathway to other applications that utilize a superposition of communication links.