Quantum computing offers exponential advantages for problems in cryptography, optimization, and quantum simulation, yet the practicality of current Noisy Intermediate-Scale Quantum (NISQ) devices is severely constrained by decoherence, gate imperfections, and measurement noise. Conventional quantum error correction (QEC) codes such as Steane and surface codes impose large qubit overheads and require high-fidelity logical operations, making them unsuitable for near-term hardware. To address this gap, this work introduces ML-QEM, an adaptive quantum error mitigation framework that employs machine learning to identify and correct dominant Pauli error patterns in real time using only 3–5 ancillary qubits. By integrating Qiskit Aer noise modeling with a lightweight TensorFlow-based classifier, ML-QEM learns device-specific noise characteristics and applies targeted recovery operations with minimal latency. Evaluations across depolarizing, amplitude damping, and thermal relaxation noise models demonstrate a 28.4% average fidelity improvement, 60–84% lower overhead than Steane and surface codes, and a classical processing delay of only 21.7 ms. ML-QEM thus provides an effective and resource-efficient pathway toward enhancing quantum computation fidelity in the NISQ era.
Quantum computing offers exponential advantages for problems in cryptography, optimization, and quantum simulation, yet the practicality of current Noisy Intermediate-Scale Quantum (NISQ) devices is severely constrained by decoherence, gate imperfections, and measurement noise. Conventional quantum error correction (QEC) codes such as Steane and surface codes impose large qubit overheads and require high-fidelity logical operations, making them unsuitable for near-term hardware. To address this gap, this work introduces ML-QEM, an adaptive quantum error mitigation framework that employs machine learning to identify and correct dominant Pauli error patterns in real time using only 3–5 ancillary qubits. By integrating Qiskit Aer noise modeling with a lightweight TensorFlow-based classifier, ML-QEM learns device-specific noise characteristics and applies targeted recovery operations with minimal latency. Evaluations across depolarizing, amplitude damping, and thermal relaxation noise models demonstrate a 28.4% average fidelity improvement, 60–84% lower overhead than Steane and surface codes, and a classical processing delay of only 21.7 ms. ML-QEM thus provides an effective and resource-efficient pathway toward enhancing quantum computation fidelity in the NISQ era.
Abstract Quantum computing has recently emerged as a novel paradigm for solving problems otherwise intractable on classical computers, yet the practical progress of quantum computers is severely impacted by noise, decoherence, and imperfect gate operations in Noisy Intermediate-Scale Quantum (NISQ) devices. Specific to IBM Quantum hardware, imperfections due to readout error, gate errors, and device drift, which depends on time, resolves limits for the accuracy of outputs from our algorithms. The mitigation strategies currently used, for example, Measurement Error Mitigation (MEM), Zero Noise Extrapolation (ZNE), and Clifford Data Regression (CDR), offer improvement over raw, unmitigated outputs, but they are static and not dynamic; the reduction of noise in within an NISQ device is temporal and can vary in patterns that are non-zero. In addition to this, using the conventional methods provides inconsistent and suboptimal results.This study will provide enhanced reliability with respect to performing quantum computation on IBM Quantum hardware with a unique mitigation framework that is adaptive and computationally efficient for a high-fidelity output. The problem taken on here is the failure of existing error mitigation strategies to provide adaptive noise compensation, as they assume a statically-distributed error, despite the performance-related characteristics already being documented in regards to calibration drift and variation over time.To achieve this, we propose a Hybrid Adaptive Error Mitigation (HAEM) approach that includes baseline measurement error mitigation and an additional correction layer that utilizes realtime calibration information, along with lightweight machine learning models. The approach can be broken down into three steps: (i) perform standard measurement error mitigation to reduce classical readout noise, (ii) execute compact calibration circuits, such as Bell states, GHZ states and Clifford benchmarks to capture then current error profile of the device, and (iii) use a lightweight machine learning model (having been trained on historical and newest calibration data) to dynamically change the mitigation weights applied for the target quantum algorithm. All implementation is done using Qiskit Runtime to ensure low-latency execution, and we completed experiments on both Qiskit Aer noisy simulators and IBM Quantum devices.Initial results suggest HAEM improved the outputs of quantum algorithms' fidelity compared to the unmitigated runs and the baseline measurement error mitigation (MEM) runs. On the noisy simulators, HAEM increased fidelity from a raw performance of 0.65 to 0.87, nearly a 34% improvement. In fairer hardware-like scenarios, fidelity-on-average was persistently 12% better than MEM, with nearly equal time duration for the additional adaptive measurements. The adaptive aspect of HAEM consistently supported subsequent calibration cycles of the device and was effective to continue providing fidelity improvements despite the static mitigation performance degrading.To sum up, the proposed HAEM framework is a modern and viable alternative for error mitigation which brings together the benefits of baseline approaches with corrections that are driven by fixed-function error-corrective, adaptive learning. As both learning-based and standard baseline approaches can only achieve fixed levels of performance, HAEM, through its use of noise mitigation both at execution time and through correlating it with standard data, provides a route towards reliable quantum computations on current IBM hardware. HAEM also presents a contribution to the NISQ error-resilient landscape, and however it is intended that it will continue to improve future applications of hybrid workflows of quantum and classical computation where error mitigation and resilience is important.
The pursuit of high-fidelity digital quantum simulation is fundamentally constrained by the inevitable presence of noise in current and near-term quantum processors. While quantum error correction ultimately promises fault-tolerance, its substantial qubit overhead renders it impractical for the noisy intermediate-scale quantum (NISQ) era. This research addresses the critical gap between hardware imperfections and simulation accuracy by designing systematic, resource-efficient machine learning (ML) error-mitigation protocols tailored specifically for digital quantum simulation. Unlike generic error-suppression methods, our approach exploits the unique structural properties of simulated quantum dynamics—including time-translation invariance, locality of interactions, and conserved quantities—to inform the training of lightweight neural networks and Gaussian process regressors. We develop a hybrid framework that combines randomized compiling with data-driven noise-inversion models, enabling real-time estimation and subtraction of both coherent and incoherent errors without exponential sampling overhead. Through extensive numerical benchmarks on spin-chain and Fermi-Hubbard models, we demonstrate that our ML protocols achieve up to an order-of-magnitude reduction in infidelity compared to standard probabilistic error cancellation and zero-noise extrapolation, while requiring fewer calibration circuits. Furthermore, we introduce an adaptive online learning scheme that continuously refines the mitigation model during the simulation runtime, automatically adjusting to time-dependent drift in hardware noise. Our results establish a practical pathway toward scalable, high-accuracy quantum simulations on existing devices, with implications for condensed matter physics, quantum chemistry, and the development of quantum advantage benchmarks.
Quantum computation has the promise to solve problems that are not efficiently solvable by classical means. Yet, due to the fragile nature of quantum states, it is unavoidable that quantum systems are subject to decoherence, gate imperfections, and measurement errors. These problems stand as a major roadblock to the construction of large-scale fault-tolerant quantum computers. Conventional quantum error correction (QEC) codes, such as the surface code or Shor code, need to use an extensive amount of redundancy and classical control, which can be both computationally expensive and challenging to scale. In this context, we propose to investigate the use of machine learning (ML) techniques by realizing on-line identification, localization and correction of these quantum errors for fault-tolerant quantum computation by means of fault-tolerant quantum computing processes. Our model introduces a hybrids ML-QEC architecture that combines classical neural networks and decision-tree classifiers with quantum syndrome decoding. These models are trained on error syndromes produced using the approximation of common noise models (for example, depolarizing noise, dephasing and amplitude damping), simulated under different QEC schemes. The machine learning methods are trained with quantum error patterns and have a capability to rapidly infer where errors are likely to occur, as well as recommend correction operations with high confidence. As a result, the system reduces dramatically the delay and computational costs when compared to conventional decoding methods. There is also a self-adaptive learning module in the work, which recommences training on fresh quantum error distributions, meaning the system can adapt to changes in the environment (and also the decay of the hardware) as time progresses. The study further carries out ML predictions inside a real-time loop and cross-checks them with quantum state tomography and entanglement fidelity such as indicators. Experimental characterization on dedicated devices as well as noise models show that our ML-enhanced decoders reach higher fidelity and lower logical error rates compared to baseline decoders, especially in non-uniform or time-dependent noise. This work is a significant stride towards realizing practical fault-tolerant quantum computation by combining quantum error correction with the versatility and scalability of machine learning. With intelligent models to dictate learning, our proposed framework is able to eliminate a lot of trial-and-error manual processes in the conventional heuristic-based approach, and points to a potential path to achieve scalable quantum information processing platforms.
Noisy Intermediate-Scale Quantum (NISQ) devices represent current quantum computing technology with 50-1000 qubits operating without comprehensive fault-tolerant error correction. The fundamental challenge lies in balancing error correction necessity against prohibitive resource overhead. Conventional quantum error correction codes require 10:1 to 1000:1 qubit ratios and syndrome extraction circuits exceeding 50 gates, consuming entire NISQ capacities. This work presents a comprehensive low-overhead quantum error correction framework specifically designed for NISQ constraints. Our approach combines three elements: optimised stabiliser codes which get qubit ratios of 3:1 to 10:1, adaptive syndrome extraction which works with circuits with less than 20 gates and machine learning-enhanced decoding which is specific to the noise profiles of the hardware. Experimental validation on IBM Quantum (127- qubit Eagle), IonQ trapped-ion systems, and Google Sycamore simulation demonstrates successful quantum state protection achieving 2.7× error suppression with 60% overhead reduction versus conventional surface codes. The proposed code achieves logical error rates of 0.0065 using only 10 physical qubits compared to 25 qubits for equivalent surface codes. Machine learning decoder attains 94.3% accuracy with 12-microsecond inference latency, enabling real-time error correction. Break-even performance achieved at 0.8% physical error rates establishes practical pathways for near-term quantum advantage in variational algorithms and quantum simulation applications.
Noisy Intermediate-Scale Quantum (NISQ) devices represent current quantum computing technology with 50-1000 qubits operating without comprehensive fault-tolerant error correction. The fundamental challenge lies in balancing error correction necessity against prohibitive resource overhead. Conventional quantum error correction codes require 10:1 to 1000:1 qubit ratios and syndrome extraction circuits exceeding 50 gates, consuming entire NISQ capacities. This work presents a comprehensive low-overhead quantum error correction framework specifically designed for NISQ constraints. Our approach combines three elements: optimised stabiliser codes which get qubit ratios of 3:1 to 10:1, adaptive syndrome extraction which works with circuits with less than 20 gates and machine learning-enhanced decoding which is specific to the noise profiles of the hardware. Experimental validation on IBM Quantum (127- qubit Eagle), IonQ trapped-ion systems, and Google Sycamore simulation demonstrates successful quantum state protection achieving 2.7× error suppression with 60% overhead reduction versus conventional surface codes. The proposed code achieves logical error rates of 0.0065 using only 10 physical qubits compared to 25 qubits for equivalent surface codes. Machine learning decoder attains 94.3% accuracy with 12-microsecond inference latency, enabling real-time error correction. Break-even performance achieved at 0.8% physical error rates establishes practical pathways for near-term quantum advantage in variational algorithms and quantum simulation applications.
Hybridizing machine learning (ML) with quantum computing has become an attractive strategy to increase computational power on Noisy Intermediate Scale Quantum (NISQ) devices. Although these can be potentially quantum advantage devices, their qubit numbers and noise are bounded and there are challenges when it comes to practical quantum circuit realization. This work concentrates on the creation of optimized quantum circuits via ML-based strategies, to enhance the performance of the circuits, to reduce the error rate and to accommodate the particular noise profile of the hardware of NISQ devices. The resulting suboptimal mappings with little or no consideration of noise and hardware topology in traditional quantum compilers can ruin the fidelity of quantum algorithm. Leveraging machine learning, and specifically reinforcement and supervised learning methods, our method learns to optimize compilation strategy for specific quantum hardware architecture. The paper proposes a framework that uses machine learning models to predict qubit mappings, gate decompositions, and transpilation paths that minimize gate depth and error accumulation. We also investigate transfer learning methods for propagating the learned compilation strategies to novel NISQ machines. Such methods are empirically validated on both simulated and real quantum hardware backends, providing evidence of circuit depth, execution time and error reductions. The results show that ML-assisted compilation can achieve better success probabilities for benchmark quantum algorithms like VQE and QAOA than conventional compilers. Furthermore, the work examines the interpretability of ML models providing hardware-aware optimization recommendations and understanding the noise patterns and methods of error correction. Our work highlights the key role of ML for transferring between theoretical quantum algorithms and their practical NISQ implementations. This integration boosts the immediate applicability of existing quantum devices and provides a basis for adaptive and scalable likelihood-based compilation for the era of fault-tolerant quantum computation. Our results motivate further investigation of hybrid classical-quantum workflows, in which ML iteratively improves compilation in accordance with changing hardware noise and capabilities. By improving quantum circuit compilation onNISQ computers, this work is taking steps toward the realization of quantum advantage in application scenarios such as optimization, cryptography, and quantum simulation without needing to wait for fully fault-tolerant large-scale quantum computers.