Abstract Quantum Error Mitigation (QEM) enables the extraction of high-quality results from the presently-available noisy quantum computers. In this approach, the effect of the noise on observables of interest can be mitigated using multiple measurements without additional hardware overhead. Unfortunately, current QEM techniques are limited to weak noise or lack scalability. In this work, we introduce a QEM method termed ‘Adaptive KIK’ that adapts to the noise level of the target device, and therefore, can handle moderate-to-strong noise. The implementation of the method is experimentally simple — it does not involve any tomographic information or machine-learning stage, and the number of different quantum circuits to be implemented is independent of the size of the system. Furthermore, we have shown that it can be successfully integrated with randomized compiling for handling both incoherent as well as coherent noise. Our method handles spatially correlated and time-dependent noise which enables us to run shots over the scale of days or more despite the fact that noise and calibrations change in time. Finally, we discuss and demonstrate why our results suggest that gate calibration protocols should be revised when using QEM. We demonstrate our findings in the IBM quantum computers and through numerical simulations.
Abstract Quantum Error Mitigation (QEM) enables the extraction of high-quality results from the presently-available noisy quantum computers. In this approach, the effect of the noise on observables of interest can be mitigated using multiple measurements without additional hardware overhead. Unfortunately, current QEM techniques are limited to weak noise or lack scalability. In this work, we introduce a QEM method termed ‘Adaptive KIK’ that adapts to the noise level of the target device, and therefore, can handle moderate-to-strong noise. The implementation of the method is experimentally simple — it does not involve any tomographic information or machine-learning stage, and the number of different quantum circuits to be implemented is independent of the size of the system. Furthermore, we have shown that it can be successfully integrated with randomized compiling for handling both incoherent as well as coherent noise. Our method handles spatially correlated and time-dependent noise which enables us to run shots over the scale of days or more despite the fact that noise and calibrations change in time. Finally, we discuss and demonstrate why our results suggest that gate calibration protocols should be revised when using QEM. We demonstrate our findings in the IBM quantum computers and through numerical simulations.
Abstract Quantum computing has recently emerged as a novel paradigm for solving problems otherwise intractable on classical computers, yet the practical progress of quantum computers is severely impacted by noise, decoherence, and imperfect gate operations in Noisy Intermediate-Scale Quantum (NISQ) devices. Specific to IBM Quantum hardware, imperfections due to readout error, gate errors, and device drift, which depends on time, resolves limits for the accuracy of outputs from our algorithms. The mitigation strategies currently used, for example, Measurement Error Mitigation (MEM), Zero Noise Extrapolation (ZNE), and Clifford Data Regression (CDR), offer improvement over raw, unmitigated outputs, but they are static and not dynamic; the reduction of noise in within an NISQ device is temporal and can vary in patterns that are non-zero. In addition to this, using the conventional methods provides inconsistent and suboptimal results.This study will provide enhanced reliability with respect to performing quantum computation on IBM Quantum hardware with a unique mitigation framework that is adaptive and computationally efficient for a high-fidelity output. The problem taken on here is the failure of existing error mitigation strategies to provide adaptive noise compensation, as they assume a statically-distributed error, despite the performance-related characteristics already being documented in regards to calibration drift and variation over time.To achieve this, we propose a Hybrid Adaptive Error Mitigation (HAEM) approach that includes baseline measurement error mitigation and an additional correction layer that utilizes realtime calibration information, along with lightweight machine learning models. The approach can be broken down into three steps: (i) perform standard measurement error mitigation to reduce classical readout noise, (ii) execute compact calibration circuits, such as Bell states, GHZ states and Clifford benchmarks to capture then current error profile of the device, and (iii) use a lightweight machine learning model (having been trained on historical and newest calibration data) to dynamically change the mitigation weights applied for the target quantum algorithm. All implementation is done using Qiskit Runtime to ensure low-latency execution, and we completed experiments on both Qiskit Aer noisy simulators and IBM Quantum devices.Initial results suggest HAEM improved the outputs of quantum algorithms' fidelity compared to the unmitigated runs and the baseline measurement error mitigation (MEM) runs. On the noisy simulators, HAEM increased fidelity from a raw performance of 0.65 to 0.87, nearly a 34% improvement. In fairer hardware-like scenarios, fidelity-on-average was persistently 12% better than MEM, with nearly equal time duration for the additional adaptive measurements. The adaptive aspect of HAEM consistently supported subsequent calibration cycles of the device and was effective to continue providing fidelity improvements despite the static mitigation performance degrading.To sum up, the proposed HAEM framework is a modern and viable alternative for error mitigation which brings together the benefits of baseline approaches with corrections that are driven by fixed-function error-corrective, adaptive learning. As both learning-based and standard baseline approaches can only achieve fixed levels of performance, HAEM, through its use of noise mitigation both at execution time and through correlating it with standard data, provides a route towards reliable quantum computations on current IBM hardware. HAEM also presents a contribution to the NISQ error-resilient landscape, and however it is intended that it will continue to improve future applications of hybrid workflows of quantum and classical computation where error mitigation and resilience is important.
Abstract Hardware Error Outputs of Quantum Computing Not Reliable because of Hardware Calibration Drift, Measurement Noise, Gate Errors on NISQ Systems. Even though MEMs, ZNEs, and CDRs slightly increase output accuracy, they operate under the assumption of static noise, therefore they do not account for changing output of the NISQ devices in real-time. The limitations of MEMs, ZNEs, and CDRs can be overcome by using the Hybrid Adaptive Error Mitigation (HAEM) method proposed in this article that has the capability to combine baseline measurement-error mitigation with Real-time Calibration Circuits and Lightweight-Machine-learning algorithms for adaptive error-correcting and increasing the overall output integrity of quantum devices affected by fluctuations in noise. The application of the HAEM method will utilize Qiskit Runtime to develop, implement, and validate the Hybrid Adaptive Error Mitigation method through testing using controlled noisy simulated environments based on the characteristics of current advanced NISQ quantum computers. The results of the tests demonstrate the HAEM architecture provides a higher level of accuracy and fidelity than static and non-mitigated executions ("mitigated execution vs. HAEM execution"), providing an increase of up to thirty-four percent in fidelity under high-noise conditions with minimal computational overhead. The results demonstrate that the use of adaptive and data-driven mitigation techniques, like those used in the Hybrid Adaptive Error Mitigation method, are an efficient way to increase the accuracy of quantum computations.
Noise in current quantum hardware (NISQ devices) poses a major obstacle by degrading gate operations and overall circuit fidelity toward FTQC. Traditional quantum error correction (QEC) is effective but resource-intensive, requiring several extra qubits and operations beyond the reach of near-term devices. Quantum error mitigation (QEM) offers a complementary path by reducing the impact of error prior to full correction. We present an adaptive pulse-level QEM using genetic algorithms to dynamically adjust control pulses in real-time, improving algorithm fidelity without modifying the logic structure of a quantum circuit. By targeting pulse parameters directly, this method reduces the impact of various noise sources, improving algorithm resilience in quantum circuits. To demonstrate the effectiveness of our methodology, we apply our protocol to five key quantum algorithms, including Bernstein-Vazirani, DeutschJozsa, Grover's search, Quantum Fourier Transform (QFT), and its inverse (IQFT). Experimental results show that our pulse-level optimization strategy provides a flexible and efficient solution for increasing fidelity during the noisy execution of quantum circuits. Our work contributes to advance error mitigation techniques, essential for robust quantum computing, which will increasingly require HPC infrastructure as quantum systems scale.
Quantum computing offers exponential advantages for problems in cryptography, optimization, and quantum simulation, yet the practicality of current Noisy Intermediate-Scale Quantum (NISQ) devices is severely constrained by decoherence, gate imperfections, and measurement noise. Conventional quantum error correction (QEC) codes such as Steane and surface codes impose large qubit overheads and require high-fidelity logical operations, making them unsuitable for near-term hardware. To address this gap, this work introduces ML-QEM, an adaptive quantum error mitigation framework that employs machine learning to identify and correct dominant Pauli error patterns in real time using only 3–5 ancillary qubits. By integrating Qiskit Aer noise modeling with a lightweight TensorFlow-based classifier, ML-QEM learns device-specific noise characteristics and applies targeted recovery operations with minimal latency. Evaluations across depolarizing, amplitude damping, and thermal relaxation noise models demonstrate a 28.4% average fidelity improvement, 60–84% lower overhead than Steane and surface codes, and a classical processing delay of only 21.7 ms. ML-QEM thus provides an effective and resource-efficient pathway toward enhancing quantum computation fidelity in the NISQ era.
We present a simple, malleable and low-overhead approach for improving generic biased quantum error mitigation (QEM) methods, achieving up to 15% fidelity improvements over standard QEM on 100-qubit circuits with up to 2000 entangling gates. We do so by constructing verifiable benchmark circuits which mirror the application circuit's native-gate structure and thus noise profile. These circuits can be used to benchmark and mitigate the bias of the underlying error mitigation method, requiring only the application circuit and hardware native gate set. We present two methods for generating benchmark circuits; one is agnostic to the target hardware at the expense of a small overhead of single-qubit gates, while the other is specific to the IBM superconducting hardware and has no gate overhead. As a corollary, we introduce benchmarked-noise zero-noise extrapolation (bnZNE) as a simple adaptation of zero-noise extrapolation (ZNE), one of the most popular error mitigation methods. We consider as an example the bias-mitigated ZNE and bnZNE of Trotterized Hamiltonian simulations, observing that our approaches outperform standard ZNE using both small-scale classical simulations and 100-qubit utility-scale experiments on the IBM superconducting hardware. We consider the measurement of both single-site observables as well as two-site correlations along a one-dimensional qubit chain. We also provide a software package for implementing the error mitigation techniques used in this research.
Abstract We present a method to improve the convergence of variational algorithms based on hidden inverses (HIs) to mitigate coherent errors. In the context of error mitigation, this means replacing the hardware implementation of certain Hermitian gates with their inverses. Doing so results in noise cancellation and a more resilient quantum circuit. This approach improves performance in a variety of two-qubit error models where the noise operator also inverts with the gate inversion. We apply the mitigation scheme on superconducting quantum processors running the variational quantum eigensolver (VQE) algorithm to find the H 2 ground-state energy. When implemented on superconducting hardware we find that the mitigation scheme effectively reduces the energy fluctuations in the parameter learning path in VQE, reducing the number of iterations for a converged value. We also provide a detailed numerical simulation of VQE performance under different noise models and explore how HIs and randomized compiling affect the underlying loss landscape of the learning problem. These simulations help explain our experimental hardware outcomes, helping to connect lower-level gate performance to application-specific behavior in contrast to metrics like fidelity which often do not provide an intuitive insight into observed high level performance.