Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

SPIE Novel Patterning Technologies

Hybrid patterning of 3D silicon fin capacitors for quantum circuits

Patrick Sean Finnegan, Scott Edward Weatherred, Robert B. Reyna, Robin Bay Jacobs-Gedrim, Sueli Skinner Ramos, Stephen M. Carr

Published Apr 8, 2026• 0 citations
Publisher

Abstract

Solid-state circuits are a compelling platform for quantum information science and engineering. A superconducting circuit known as the transmon has propelled much of the progress in the field yet is challenging to scale by replication and connection in two dimensions (2D). In particular, a 2D shunting capacitor may dominate the transmon qubit area. An alternative approach to a 2D capacitor is to utilize the vertical dimension to define a three-dimensional (3D) capacitor using a vertical fin of silicon as the dielectric. Here we report on the hybrid patterning of vertical silicon fin capacitors for superconducting quantum circuits. Our hybrid patterning approach combines multiple top-down methods including precision crystallographic alignment methods, optical lithography, electron beam lithography, reactive ion etching, and wet etching. We utilize the hybrid patterning approach to realize a 3D capacitor defined by vertical aluminum electrodes with a vertical silicon fin as the dielectric. We evaluate the scaling of the physical dimensions of 3D silicon fin capacitors for a fixed value of the shunting capacitance consistent with transmon operation. Transmon qubit area incorporating a 3D silicon fin shunting capacitor may be reduced by several orders-of-magnitude compared to a state-of-the-art 2D shunting capacitor.

DOI
10.1117/12.3094219

Related papers

Silicon Fin Capacitor for Superconducting Quantum Circuits

Patrick Sean Finnegan, Sueli Skinner Ramos, Robert B. Reyna +2 more

Superconducting circuits are a core platform for quantum information science and engineering. A superconducting circuit known as the transmon has propelled much of the progress in the field yet is challenging to scale by replication and connection in two dimensions. In particular, a shunting coplanar capacitor may dominate the transmon qubit area. An alternative approach to a coplanar capacitor is to utilize the vertical dimension to define a capacitor using a vertical fin of silicon as the dielectric. Here we report on a vertical silicon fin capacitor for superconducting quantum circuits. A novel aspect of this work is a trench of controllable width on each side of the vertical silicon fin, enabling the additional superconducting quantum electrical circuitry to be microfabricated in or above the trench.

IEEE International Conference on Quantum Computing and Engineering (QCE)•Aug 30, 2025•0 citations

Fabrication and characterization of low-loss Al/Si/Al parallel plate capacitors for superconducting quantum information applications

Anthony McFadden, Aranya Goswami, Tongyu Zhao +7 more

Abstract Increasing the density of superconducting circuits requires compact components, however, superconductor-based capacitors typically perform worse as dimensions are reduced due to loss at surfaces and interfaces. Here, parallel plate capacitors composed of aluminum-contacted, crystalline silicon fins are shown to be a promising technology for use in superconducting circuits by evaluating the performance of lumped element resonators and transmon qubits. High aspect ratio Si-fin capacitors having widths below 300 nm with an approximate total height of 3 μm are fabricated using anisotropic wet etching of Si(110) substrates followed by aluminum metallization. The single-crystal Si capacitors are incorporated in lumped element resonators and transmons by shunting them with lithographically patterned aluminum inductors and conventional A l/A l O x /A l Josephson junctions respectively. Microwave characterization of these devices suggests state-of-the-art performance for superconducting parallel plate capacitors with low power internal quality factor of lumped element resonators greater than 500 k and qubit T 1 times greater than 25 μs. These results suggest that Si-Fins are a promising technology for applications that require low-loss, compact, superconductor-based capacitors with minimal stray capacitance.

arXiv:2408.01369•npj Quantum Information•Jan 22, 2025•11 citations

Free-standing silicon shadow masks for transmon qubit fabrication

I. Tsioutsios, Kyle Serniak, S. Diamond +6 more

Nanofabrication techniques for superconducting qubits rely on resist-based masks patterned by electron-beam or optical lithography. We have developed an alternative nanofabrication technique based on free-standing silicon shadow masks fabricated from silicon-on-insulator wafers. These silicon shadow masks not only eliminate organic residues associated with resist-based lithography, but also provide a pathway to better understand and control surface-dielectric losses in superconducting qubits by decoupling mask fabrication from substrate preparation. We have successfully fabricated aluminum 3D transmon superconducting qubits with these shadow masks and found coherence quality factors comparable to those fabricated with standard techniques.

arXiv:1911.05924•AIP Advances•Jun 1, 2020•25 citations

Towards merged-element transmons using silicon fins: The FinMET

Aranya Goswami, Anthony McFadden, Tongyu Zhao +7 more

A merged-element transmon (MET) device based on silicon (Si) fins is proposed, and the first steps to form such a “FinMET” are demonstrated. This new application of fin technology capitalizes on the anisotropic etch of Si(111) relative to Si(110) to define atomically flat, high aspect ratio Si tunnel barriers with epitaxial superconductor contacts on parallel sidewall surfaces. This process circumvents the challenges associated with the growth of low-loss insulating barriers on lattice matched superconductors. By implementing low-loss, intrinsic float-zone Si as the barrier material rather than commonly used, potentially lossy AlOx, the FinMET is expected to overcome problems with standard transmons by (1) reducing dielectric losses; (2) minimizing the formation of two-level system spectral features; (3) exhibiting greater control over barrier thickness and qubit frequency spread, especially when combined with commercial fin fabrication and atomic-layer or digital etching; (4) potentially reducing the footprint by several orders of magnitude; and (5) allowing scalable fabrication. Here, as a first step to making such a device, the fabrication of Si fin capacitors on Si(110) substrates with shadow-deposited Al electrodes is demonstrated. These fin capacitors are then fabricated into lumped element resonator circuits and probed using low-temperature microwave measurements. Further thinning of silicon junctions toward the tunneling regime will enable the scalable fabrication of FinMET devices based on existing silicon technology while simultaneously avoiding lossy amorphous dielectrics for the tunnel barriers.

arXiv:2108.11519•Applied Physics Letters•Aug 8, 2022•15 citations

Characterization of superconducting through-silicon vias as capacitive elements in quantum circuits

Thomas Hazard, Wayne H. Woods, Danna Rosenberg +13 more

The large physical size of superconducting qubits and their associated on-chip control structures presents a practical challenge toward building a large-scale quantum computer. In particular, transmons require a high-quality-factor shunting capacitance that is typically achieved by using a large coplanar capacitor. Other components, such as superconducting microwave resonators used for qubit state readout, are typically constructed from coplanar waveguides, which are millimeters in length. Here, we use compact superconducting through-silicon vias to realize lumped-element capacitors in both qubits and readout resonators to significantly reduce the on-chip footprint of both of these circuit elements. We measure two types of devices to show that through-silicon vias are of sufficient quality to be used as capacitive circuit elements and provide a significant reduction in size over existing approaches.

arXiv:2308.00834•Applied Physics Letters•Oct 9, 2023•15 citations

Manufacturing of Superconducting Qubits Using Nb/Al-AlO x /Nb Josephson Junctions on Silicon Substrate

Qingjian Li, Y. F. Wu, Zhengqi Niu +4 more

Superconducting qubits stand as a pivotal platform for quantum computing, where scalable fabrication is crucial for building complex quantum circuits. Here, we develop a fabrication process for Nb/Al-AlOx/Nb tri-layer Josephson junctions on 4-inch silicon wafers using full-stepper lithography. Utilizing this process, we have produced both transmon and C-shunt flux qubits. The well-behavedI-Vcharacteristics of junction arrays containing up to 1000 junctions highlight the excellent uniformity and scalability of our process. Furthermore, by introducing a RIE pre-etch before BOE treatment to remove most of the SiO2insulator, we have suppressed dielectric loss and increased the coherence time of the Nb-based transmon qubit by almost 10 times, achieving a quality factor comparable to state-of-the-art Nb-based qubits on sapphire substrates. Given its compatibility with silicon technology, our method paves the way for the integration of multi-qubit processors and the co-fabrication of complex quantum circuits.

IEEE Transactions on Applied Superconductivity•Jan 28, 2026•1 citation
Solid-state circuits are a compelling platform for quantum information science and engineering. A superconducting circuit known as the transmon has propelled much of the progress in the field yet is challenging to scale by replication and connection in two dimensions (2D). In particular, a 2D shunting capacitor may dominate the transmon qubit area. An alternative approach to a 2D capacitor is to utilize the vertical dimension to define a three-dimensional (3D) capacitor using a vertical fin of silicon as the dielectric. Here we report on the hybrid patterning of vertical silicon fin capacitors for superconducting quantum circuits. Our hybrid patterning approach combines multiple top-down methods including precision crystallographic alignment methods, optical lithography, electron beam lithography, reactive ion etching, and wet etching. We utilize the hybrid patterning approach to realize a 3D capacitor defined by vertical aluminum electrodes with a vertical silicon fin as the dielectric. We evaluate the scaling of the physical dimensions of 3D silicon fin capacitors for a fixed value of the shunting capacitance consistent with transmon operation. Transmon qubit area incorporating a 3D silicon fin shunting capacitor may be reduced by several orders-of-magnitude compared to a state-of-the-art 2D shunting capacitor.
Superconducting circuits are a core platform for quantum information science and engineering. A superconducting circuit known as the transmon has propelled much of the progress in the field yet is challenging to scale by replication and connection in two dimensions. In particular, a shunting coplanar capacitor may dominate the transmon qubit area. An alternative approach to a coplanar capacitor is to utilize the vertical dimension to define a capacitor using a vertical fin of silicon as the dielectric. Here we report on a vertical silicon fin capacitor for superconducting quantum circuits. A novel aspect of this work is a trench of controllable width on each side of the vertical silicon fin, enabling the additional superconducting quantum electrical circuitry to be microfabricated in or above the trench.
Abstract Increasing the density of superconducting circuits requires compact components, however, superconductor-based capacitors typically perform worse as dimensions are reduced due to loss at surfaces and interfaces. Here, parallel plate capacitors composed of aluminum-contacted, crystalline silicon fins are shown to be a promising technology for use in superconducting circuits by evaluating the performance of lumped element resonators and transmon qubits. High aspect ratio Si-fin capacitors having widths below 300 nm with an approximate total height of 3 μm are fabricated using anisotropic wet etching of Si(110) substrates followed by aluminum metallization. The single-crystal Si capacitors are incorporated in lumped element resonators and transmons by shunting them with lithographically patterned aluminum inductors and conventional A l/A l O x /A l Josephson junctions respectively. Microwave characterization of these devices suggests state-of-the-art performance for superconducting parallel plate capacitors with low power internal quality factor of lumped element resonators greater than 500 k and qubit T 1 times greater than 25 μs. These results suggest that Si-Fins are a promising technology for applications that require low-loss, compact, superconductor-based capacitors with minimal stray capacitance.
Nanofabrication techniques for superconducting qubits rely on resist-based masks patterned by electron-beam or optical lithography. We have developed an alternative nanofabrication technique based on free-standing silicon shadow masks fabricated from silicon-on-insulator wafers. These silicon shadow masks not only eliminate organic residues associated with resist-based lithography, but also provide a pathway to better understand and control surface-dielectric losses in superconducting qubits by decoupling mask fabrication from substrate preparation. We have successfully fabricated aluminum 3D transmon superconducting qubits with these shadow masks and found coherence quality factors comparable to those fabricated with standard techniques.
A merged-element transmon (MET) device based on silicon (Si) fins is proposed, and the first steps to form such a “FinMET” are demonstrated. This new application of fin technology capitalizes on the anisotropic etch of Si(111) relative to Si(110) to define atomically flat, high aspect ratio Si tunnel barriers with epitaxial superconductor contacts on parallel sidewall surfaces. This process circumvents the challenges associated with the growth of low-loss insulating barriers on lattice matched superconductors. By implementing low-loss, intrinsic float-zone Si as the barrier material rather than commonly used, potentially lossy AlOx, the FinMET is expected to overcome problems with standard transmons by (1) reducing dielectric losses; (2) minimizing the formation of two-level system spectral features; (3) exhibiting greater control over barrier thickness and qubit frequency spread, especially when combined with commercial fin fabrication and atomic-layer or digital etching; (4) potentially reducing the footprint by several orders of magnitude; and (5) allowing scalable fabrication. Here, as a first step to making such a device, the fabrication of Si fin capacitors on Si(110) substrates with shadow-deposited Al electrodes is demonstrated. These fin capacitors are then fabricated into lumped element resonator circuits and probed using low-temperature microwave measurements. Further thinning of silicon junctions toward the tunneling regime will enable the scalable fabrication of FinMET devices based on existing silicon technology while simultaneously avoiding lossy amorphous dielectrics for the tunnel barriers.
The large physical size of superconducting qubits and their associated on-chip control structures presents a practical challenge toward building a large-scale quantum computer. In particular, transmons require a high-quality-factor shunting capacitance that is typically achieved by using a large coplanar capacitor. Other components, such as superconducting microwave resonators used for qubit state readout, are typically constructed from coplanar waveguides, which are millimeters in length. Here, we use compact superconducting through-silicon vias to realize lumped-element capacitors in both qubits and readout resonators to significantly reduce the on-chip footprint of both of these circuit elements. We measure two types of devices to show that through-silicon vias are of sufficient quality to be used as capacitive circuit elements and provide a significant reduction in size over existing approaches.
Superconducting qubits stand as a pivotal platform for quantum computing, where scalable fabrication is crucial for building complex quantum circuits. Here, we develop a fabrication process for Nb/Al-AlOx/Nb tri-layer Josephson junctions on 4-inch silicon wafers using full-stepper lithography. Utilizing this process, we have produced both transmon and C-shunt flux qubits. The well-behavedI-Vcharacteristics of junction arrays containing up to 1000 junctions highlight the excellent uniformity and scalability of our process. Furthermore, by introducing a RIE pre-etch before BOE treatment to remove most of the SiO2insulator, we have suppressed dielectric loss and increased the coherence time of the Nb-based transmon qubit by almost 10 times, achieving a quality factor comparable to state-of-the-art Nb-based qubits on sapphire substrates. Given its compatibility with silicon technology, our method paves the way for the integration of multi-qubit processors and the co-fabrication of complex quantum circuits.