Quantum systems based on superconducting circuits with qubits with quantized energy levels serve as an efficient physical background for constructing different quantum devices, for instance, quantum sensors. The important class of such engineering devices belongs to the systems with quantum tunneling effects, like Josephson junctions, where the set of energy levels is influenced by the external fields. These fields change the phase properties of the measuring qubits, and, in this way, they can be detected. The weakly anharmonic oscillator is often referred as a transmon qubit. Such qubits are constructed with superconducting capacitor structures connected by Josephson junctions, they can be controlled by microwave pulses of a few nanoseconds. The quantum sensing mechanism studied here is based on coupling the measuring transmon superconducting qubits with magnetic materials. The sensing protocol of Ramsey Fringes interferometry covers several stages and demands high-quality control over the sensor coherence. Although the weakly nonlinear properties of transmons prevent the sensing procedure from the strong influence of external perturbations, nevertheless, the extension of the coherence time interval and minimization of the dephasing effects are still a matter of great importance. Here we discuss the improvement of the quantum sensor performance by the application of feedback control in the form of gradient descent algorithm over the dephasing factor-function.
Quantum systems based on superconducting circuits with qubits with quantized energy levels serve as an efficient physical background for constructing different quantum devices, for instance, quantum sensors. The important class of such engineering devices belongs to the systems with quantum tunneling effects, like Josephson junctions, where the set of energy levels is influenced by the external fields. These fields change the phase properties of the measuring qubits, and, in this way, they can be detected. The weakly anharmonic oscillator is often referred as a transmon qubit. Such qubits are constructed with superconducting capacitor structures connected by Josephson junctions, they can be controlled by microwave pulses of a few nanoseconds. The quantum sensing mechanism studied here is based on coupling the measuring transmon superconducting qubits with magnetic materials. The sensing protocol of Ramsey Fringes interferometry covers several stages and demands high-quality control over the sensor coherence. Although the weakly nonlinear properties of transmons prevent the sensing procedure from the strong influence of external perturbations, nevertheless, the extension of the coherence time interval and minimization of the dephasing effects are still a matter of great importance. Here we discuss the improvement of the quantum sensor performance by the application of feedback control in the form of gradient descent algorithm over the dephasing factor-function.
Superconducting quantum computing is a solid state quantum computing technology based on Josephson junction circuits. It becomes one of the most promising candidates for realizing practical quantum computer/simulator, because of its scalability, easy to coupling and control, compatibility to semiconductor technologies, etc. As the complicated electromagnetic environment in solid state metal and insulator, superconducting quantum bits (qubits) suffered from shot coherence time since its early development. In this review, we described some recently developed superconducting qubit structures, including Transmon/Xmon, Fluxonium and C-shunt flux qubit. Although these new qubit structures have very different circuit parameters and energy scales, they all find their way to effectively suppress environmental noises. As a result, their coherence time were improved significantly. Transmon, a transmission-line shunted plasma oscillation qubit, was now among the most popular structures for building a multi-qubit superconducting quantum circuit. It introduced a relatively large shunt capacitor to remarkably reduce the charge dispersion. Although the non-linearity is also decreased, by operating in a properly chosen EJ/Ec, transmon can greatly reduce the charge noise while only sacrificing a small amount of non-linearity. Xmon can be considered as a modified version of transmon. It is designed and optimized for multi-qubit operation and measurement with separate X/Y and Z control lines for each qubit, and a readout bus (a transmission line or a low-Q bandpass filter) for simultaneous readout of all the qubits. Fluxonium provide another solution for suppressing the charge noise in Cooper-pair box (CPB). It introduces a large shunt inductance to filter low-frequency offset charge in the small capacitor of the phase-slip junction (the small junction). To keep the qubit operating in the charge region, the shunt inductor should be large enough to keep the impedance larger than the superconducting impedance quantum RQ~1 kΩ. As a result, the inductance can only be provided by a large series of Josephson junctions. Fluxonium keeps the advantage of high anharmonicity of CPB. In addition, it introduces another degree of freedom: external flux Φext. Quasiparticles (electrons or holes) tunneling at the small junction add coherently to produce a ″1+cosφ″ term. As a result, when Φext= Φ0/2, dissipation caused by quasiparticle tunneling is suppressed and the energy relaxation time (T1) increases drastically. C-shunt flux qubit (CSFQ) decreases α and EJ to suppress flux noise in the qubit. While the charge noise becomes the dominant noise source, a large shunt capacitor is added to suppress the charge noise, similar to that in a transmon qubit. It is worth to notice that in CSFQ, the α decreases to below but near 1/2. As a result, the double-well potential no longer exists. The energy structure become similar to transmon, with the anharmonicity be opposite. CSFQ can get a much improved coherence time, while its anharmonicity can be larger than that of transmon. Those new superconducting qubit structures provide different solutions to improve the coherence time. Although it looks much different in circuit models and parameters, they have ideas in common, and may act as guides to other novel designs with longer coherence time. We can summarize as below. (1) The qubit circuit should be free of small superconducting islands. Charge fluctuation in small islands is a major source of decoherence. As a result, increase the area of the islands, that is, increase the capacitance becomes a straight forward way to suppress the charge noise. In Fluxonium, the small junction is connected with a large series of large junctions that there is also no small islands in the whole loop. (2) Remove superconducting loops in the qubit circuit, or minimize the loop size and loop current to suppress flux noise. (3) Bias the phase difference of the small junction to π, where dissipation caused by quasiparticle tunneling can be suppressed coherently. (4) Decrease the coupling bandwidth of qubit to the environment. In a circuit-QED readout scheme, a high-Q readout resonator that dispersively coupled to the qubit protects the qubit from exposed to the electromagnetic environment of the readout circuit. A ″Purcell filter″ can also be added to suppress such decoherence further. In conclusion, we overviewed some qubit engineering techniques or ideas to improve the coherence time, which is a very important figure for building practical quantum computer/simulator. We hope that someone can combine and optimize these ideas, while interact with developments in materials and micro-fabrication technologies, to develop novel new generation superconducting qubit structures in the near future.
Quantum computers utilize qubits to store and process quantum information. In superconducting quantum computers, qubits are implemented as quantum superconducting resonant circuits. The circuits are operated only at the two energy states, which form the computational basis for the qubit. To suppress leakage to uncomputational states, superconducting qubits are designed to be anharmonic oscillators, which is achieved using one or more Josephson junctions, a nonlinear superconducting element. One of the main challenges in developing quantum computers is minimizing the decoherence caused by environmental noise. Decoherence is characterized by two coherence times, T1 for depolarization processes and T2 for dephasing. This thesis reviews and investigates the decoherence properties of superconducting qubits. The main goal of the thesis is to analyze the tradeoff between anharmonicity and dephasing in a qubit unimon. Recently developed unimon incorporates a single Josephson junction shunted by a linear inductor and a capacitor. Unimon is tunable by external magnetic flux, and at the half flux quantum bias, the Josephson energy is partially canceled by the inductive energy, allowing unimon to have relatively high anharmonicity while remaining fully protected against low-frequency charge noise. In addition, at the sweet spot with respect to the magnetic flux, unimon becomes immune to first-order perturbations in the flux. The sweet spot, however, is relatively narrow, making unimon susceptible to dephasing through the quadratic coupling to the flux noise. In the first chapter of this thesis, we present a comprehensive look into the basic theory of superconducting qubits, starting with two-state quantum systems, followed by superconductivity and superconducting circuit elements, and finally combining these two by introducing circuit quantum electrodynamics (cQED), a framework for building superconducting qubits. We follow with a theoretical discussion of decoherence in two-state quantum systems, described by the Bloch-Redfield formalism. We continue the discussion by estimating decoherence using perturbation theory, with special care put into the dephasing due to the low-frequency 1/f noise. Finally, we review the theoretical model of unimon, which is used in the numerical analysis. As a main result of this thesis, we suggest a design parameter regime for unimon, which gives the best ratio between anharmonicity and T2.
The tunnelling of quasiparticles across Josephson junctions in superconducting quantum circuits is an intrinsic decoherence mechanism for qubit degrees of freedom. Understanding the limits imposed by quasiparticle tunnelling on qubit relaxation and dephasing is of theoretical and experimental interest, particularly as improved understanding of extrinsic mechanisms has allowed crossing the 100 microsecond mark in transmon-type charge qubits. Here, by integrating recent developments in high-fidelity qubit readout and feedback control in circuit quantum electrodynamics, we transform a state-of-the-art transmon into its own real-time charge-parity detector. We directly measure the tunnelling of quasiparticles across the single junction and isolate the contribution of this tunnelling to qubit relaxation and dephasing, without reliance on theory. The millisecond timescales measured demonstrate that quasiparticle tunnelling does not presently bottleneck transmon qubit coherence, leaving room for yet another order of magnitude increase. Superconducting circuits are promising for quantum computing, but quasiparticle tunnelling across Josephson junctions introduces qubit decoherence. Ristè et al. convert a transmon qubit into its own real-time quasiparticle tunnelling detector and accurately measure induced decoherence in the millisecond range.
Quantum computers promise to solve certain problems such as quantum chemistry simulations much more efficiently than their classical counterparts. Although it is still unclear what material system will ultimately host large-scale quantum computers, solid-state systems are promising candidates due to their inherent scalability and advanced fabrication techniques that can be adapted from comparable technologies. Crucially, a future quantum computer will depend on the quality of its most fundamental building block, the quantum bit, or qubit. Qubits, although ideally insensitive to potential noise, are very susceptible to slight changes in their environment. Therefore, they do not only make the building block for quantum computers, but are also precise sensors. One of the most studied solid-state implementations of a qubit is the transmon, a weakly anharmonic oscillator based on superconducting capacitive and nonlinear inductive elements. Typically, Al-AlOx-Al superconductor-insulator-superconductor Josephson junctions are used for the latter. The interaction of the transmon with the control circuitry, typically superconducting resonators, is described by circuit quantum electrodynamics. In this PhD thesis, a more recently demonstrated type of qubit is further developed and studied in detail using circuit quantum electrodynamics. In these qubits, the Josephson element of the transmon is replaced with indium arsenide nanowires, forming a superconductor-normal metalsuperconductor junction. In addition to the standard flux tunability, these qubits can also be voltage tuned. Due to the compatibility of all the materials used with an applied magnetic field, this type of qubit is a good candidate to be used as a precise and accurate sensor in a magnetic field. The goal of this work is to introduce the in-plane magnetic field as a new tuning knob to the toolbox of circuit quantum electrodynamics. Advances in material science, especially the epitaxial growth of an aluminum shell directly on the indium arsenide nanowire, have enabled the fabrication of nanowire transmons with state-of-the-art coherence. An understanding of their workings in a zero-field environment is important before applying a magnetic field. Thus, we characterize the noise these qubits are subject to (Chapter 4) and find a strong coupling of charge two-level systems to their Josephson energy next to the expected weakly coupled flux and voltage noise. Applying a magnetic field reveals that coherence in these qubits can be observed up to 70 mT, substantially above the superconducting gap of bulk aluminum (Chapter 5). Effects limiting the performance include the thick and fully covering aluminum shell, and the alignment and stability of the magnetic field. The use of different nanowires, the installation of a persistent-current vector solenoid and additional magnetic shielding then enables the operation of voltage- and flux-tunable devices in a magnetic field (Chapter 6). This constitutes a good starting point for circuit quantum electrodynamics experiments in a magnetic field, such as the investigation of the microscopic origin of flux-noise.
this study significantly emphasizes on the entanglement engineering using a transmon qubit. A transmon qubit is created with two superconducting islands coupled with two Josephson Junction embedded into a transmission line. The transmon qubit energies are manipulated through its coupling to the transmission line. The key factor here is the coupling factor between transmission line and qubit by which the quantum features of the system such as transmon decay rate, energy dispersion, and related coherence time are controlled. To complete knowledge about the design, the system is quantum mechanically analyzed and the related Hamiltonian is derived. Accordingly, the dynamics equation of motions is derived and so the energy dispersion and the coupled system coherence time are investigated. The system engineering should be established in such a way that satisfies the energy dispersion and the coherence time. However, to analyze the entanglement between modes, it needs to calculate the number of photons of the transmission lines and the transmon qubit, and also the phase sensitive cross-correlation. The important section of this study emphasizes on engineering the coupling between the transmon qubit and transmission line to enhance the entanglement. The results show that around the Josephson Junction location where the more coupling is established the more entanglement between modes is created.
Superconductor qubits typically use aluminum–aluminum oxide tunnel junctions to provide the nonlinear inductance. Junctions with semiconductor barriers make it possible to vary the superconductor material and explore beyond aluminum. We use InAs semiconductor nanowires coated with thin superconducting shells of β-Sn to realize transmon qubits. By tuning the Josephson energy with a gate voltage, we adjust the qubit frequency over a range of 3 GHz. The longest energy relaxation time, T 1 = 27 μs, is obtained at the lowest qubit frequencies, while the longest echo dephasing time, T 2 = 1.8 μs, is achieved at higher frequencies. We assess the possible factors limiting coherence times in these devices and discuss steps to enhance performance through improvements in materials fabrication and circuit design.