Quantum computers utilize qubits to store and process quantum information. In superconducting quantum computers, qubits are implemented as quantum superconducting resonant circuits. The circuits are operated only at the two energy states, which form the computational basis for the qubit. To suppress leakage to uncomputational states, superconducting qubits are designed to be anharmonic oscillators, which is achieved using one or more Josephson junctions, a nonlinear superconducting element. One of the main challenges in developing quantum computers is minimizing the decoherence caused by environmental noise. Decoherence is characterized by two coherence times, T1 for depolarization processes and T2 for dephasing. This thesis reviews and investigates the decoherence properties of superconducting qubits. The main goal of the thesis is to analyze the tradeoff between anharmonicity and dephasing in a qubit unimon. Recently developed unimon incorporates a single Josephson junction shunted by a linear inductor and a capacitor. Unimon is tunable by external magnetic flux, and at the half flux quantum bias, the Josephson energy is partially canceled by the inductive energy, allowing unimon to have relatively high anharmonicity while remaining fully protected against low-frequency charge noise. In addition, at the sweet spot with respect to the magnetic flux, unimon becomes immune to first-order perturbations in the flux. The sweet spot, however, is relatively narrow, making unimon susceptible to dephasing through the quadratic coupling to the flux noise. In the first chapter of this thesis, we present a comprehensive look into the basic theory of superconducting qubits, starting with two-state quantum systems, followed by superconductivity and superconducting circuit elements, and finally combining these two by introducing circuit quantum electrodynamics (cQED), a framework for building superconducting qubits. We follow with a theoretical discussion of decoherence in two-state quantum systems, described by the Bloch-Redfield formalism. We continue the discussion by estimating decoherence using perturbation theory, with special care put into the dephasing due to the low-frequency 1/f noise. Finally, we review the theoretical model of unimon, which is used in the numerical analysis. As a main result of this thesis, we suggest a design parameter regime for unimon, which gives the best ratio between anharmonicity and T2.
Quantum computers utilize qubits to store and process quantum information. In superconducting quantum computers, qubits are implemented as quantum superconducting resonant circuits. The circuits are operated only at the two energy states, which form the computational basis for the qubit. To suppress leakage to uncomputational states, superconducting qubits are designed to be anharmonic oscillators, which is achieved using one or more Josephson junctions, a nonlinear superconducting element. One of the main challenges in developing quantum computers is minimizing the decoherence caused by environmental noise. Decoherence is characterized by two coherence times, T1 for depolarization processes and T2 for dephasing. This thesis reviews and investigates the decoherence properties of superconducting qubits. The main goal of the thesis is to analyze the tradeoff between anharmonicity and dephasing in a qubit unimon. Recently developed unimon incorporates a single Josephson junction shunted by a linear inductor and a capacitor. Unimon is tunable by external magnetic flux, and at the half flux quantum bias, the Josephson energy is partially canceled by the inductive energy, allowing unimon to have relatively high anharmonicity while remaining fully protected against low-frequency charge noise. In addition, at the sweet spot with respect to the magnetic flux, unimon becomes immune to first-order perturbations in the flux. The sweet spot, however, is relatively narrow, making unimon susceptible to dephasing through the quadratic coupling to the flux noise. In the first chapter of this thesis, we present a comprehensive look into the basic theory of superconducting qubits, starting with two-state quantum systems, followed by superconductivity and superconducting circuit elements, and finally combining these two by introducing circuit quantum electrodynamics (cQED), a framework for building superconducting qubits. We follow with a theoretical discussion of decoherence in two-state quantum systems, described by the Bloch-Redfield formalism. We continue the discussion by estimating decoherence using perturbation theory, with special care put into the dephasing due to the low-frequency 1/f noise. Finally, we review the theoretical model of unimon, which is used in the numerical analysis. As a main result of this thesis, we suggest a design parameter regime for unimon, which gives the best ratio between anharmonicity and T2.
Superconducting circuits provide a promising approach for constructing a large-scale quantum computer in the future. In theory, a fault-tolerant quantum computer is suitable for efficiently simulating quantum-mechanical systems, such as molecules, or factorizing large integers - to name a few examples. However, reaching a practical quantum advantage will probably require scaling up the number of qubits in current quantum-processing units by several orders of magnitude while retaining high controllability and high coherence of individual qubits. In this thesis, we first provide a review of the most common superconducting qubit types in order to shed light on the factors that affect the coherence, anharmonicity, and operation of single qubits. Using the insight gained from the review, we theoretically study a novel superconducting qubit circuit that consists of a grounded coplanar waveguide resonator incorporating an embedded Josephson junction in the center conductor of the resonator. The non-linear Josephson junction renders the normal modes of the resonator anharmonic, as a result of which one of the normal modes can be utilized to implement a qubit. The studied circuit, nicknamed as the coplanarium, may provide a high-coherence superconducting qubit since it contains no isolated superconducting islands rendering the qubit immune to dephasing arising from low-frequency charge noise. We derive the quantum Hamiltonian of the distributed circuit from first principles both with and without an external magnetic flux. Using numerical calculations based on our theoretical results, we show that the anharmonicity of the coplanarium qubit can exceed 500 MHz for a qubit frequency of 5 GHz at a flux-insensitive sweet spot if an appropriate external magnetic flux is applied. Importantly, the parameter values used in the numerical simulations are experimentally feasible, and the characteristic impedance of the resonator needs to be no greater than Z0 = 100 Omega. The relatively high anharmonicity can be attributed to a partial cancellation of the quadratic potential-energy terms associated with the Josephson junction and the linear inductance of the resonator. In conclusion, the promising coherence and anharmonicity properties may render the coplanarium qubit an interesting alternative for reducing leakage errors, and the ratio between coherence times and the duration of quantum logic gates in superconducting quantum processors.
Inductively shunted superconducting qubits, such as the unimon qubit, combine high anharmonicity with protection from low-frequency charge noise, positioning them as promising candidates for the implementation of fault-tolerant superconducting quantum computers. In this work, we develop accurate closed-form approximations for the frequency and anharmonicity of the unimon qubit that are also applicable to any single-mode superconducting qubits with a single-well potential profile, such as the quarton qubit or the kinemon qubit. We use these results to theoretically explore the single-qubit gate fidelity and coherence times across the parameter space of qubits with a single-well potential. We find that the gate fidelity can be optimized by tuning the Hamiltonian to (1) a high qubit mode impedance of 1 – 2 k Ω , (2) a low qubit frequency of 1 GHz, (3) and a perfect cancellation of the linear inductance and the Josephson inductance attained at a flux bias of half flux quantum. According to our theoretical analysis, the proposed qubit parameters have the potential to enhance the single-qubit gate fidelity of the unimon beyond 99.99%, even without significant improvements to the dielectric quality factor or the flux noise density measured for the first unimon qubits. Furthermore, we compare unimon, transmon, and fluxonium qubits in terms of their energy spectra and qubit coherence subject to dielectric loss and 1 / f flux noise in order to highlight the advantages and limitations of each qubit type.
Superconducting quantum computing is a solid state quantum computing technology based on Josephson junction circuits. It becomes one of the most promising candidates for realizing practical quantum computer/simulator, because of its scalability, easy to coupling and control, compatibility to semiconductor technologies, etc. As the complicated electromagnetic environment in solid state metal and insulator, superconducting quantum bits (qubits) suffered from shot coherence time since its early development. In this review, we described some recently developed superconducting qubit structures, including Transmon/Xmon, Fluxonium and C-shunt flux qubit. Although these new qubit structures have very different circuit parameters and energy scales, they all find their way to effectively suppress environmental noises. As a result, their coherence time were improved significantly. Transmon, a transmission-line shunted plasma oscillation qubit, was now among the most popular structures for building a multi-qubit superconducting quantum circuit. It introduced a relatively large shunt capacitor to remarkably reduce the charge dispersion. Although the non-linearity is also decreased, by operating in a properly chosen EJ/Ec, transmon can greatly reduce the charge noise while only sacrificing a small amount of non-linearity. Xmon can be considered as a modified version of transmon. It is designed and optimized for multi-qubit operation and measurement with separate X/Y and Z control lines for each qubit, and a readout bus (a transmission line or a low-Q bandpass filter) for simultaneous readout of all the qubits. Fluxonium provide another solution for suppressing the charge noise in Cooper-pair box (CPB). It introduces a large shunt inductance to filter low-frequency offset charge in the small capacitor of the phase-slip junction (the small junction). To keep the qubit operating in the charge region, the shunt inductor should be large enough to keep the impedance larger than the superconducting impedance quantum RQ~1 kΩ. As a result, the inductance can only be provided by a large series of Josephson junctions. Fluxonium keeps the advantage of high anharmonicity of CPB. In addition, it introduces another degree of freedom: external flux Φext. Quasiparticles (electrons or holes) tunneling at the small junction add coherently to produce a ″1+cosφ″ term. As a result, when Φext= Φ0/2, dissipation caused by quasiparticle tunneling is suppressed and the energy relaxation time (T1) increases drastically. C-shunt flux qubit (CSFQ) decreases α and EJ to suppress flux noise in the qubit. While the charge noise becomes the dominant noise source, a large shunt capacitor is added to suppress the charge noise, similar to that in a transmon qubit. It is worth to notice that in CSFQ, the α decreases to below but near 1/2. As a result, the double-well potential no longer exists. The energy structure become similar to transmon, with the anharmonicity be opposite. CSFQ can get a much improved coherence time, while its anharmonicity can be larger than that of transmon. Those new superconducting qubit structures provide different solutions to improve the coherence time. Although it looks much different in circuit models and parameters, they have ideas in common, and may act as guides to other novel designs with longer coherence time. We can summarize as below. (1) The qubit circuit should be free of small superconducting islands. Charge fluctuation in small islands is a major source of decoherence. As a result, increase the area of the islands, that is, increase the capacitance becomes a straight forward way to suppress the charge noise. In Fluxonium, the small junction is connected with a large series of large junctions that there is also no small islands in the whole loop. (2) Remove superconducting loops in the qubit circuit, or minimize the loop size and loop current to suppress flux noise. (3) Bias the phase difference of the small junction to π, where dissipation caused by quasiparticle tunneling can be suppressed coherently. (4) Decrease the coupling bandwidth of qubit to the environment. In a circuit-QED readout scheme, a high-Q readout resonator that dispersively coupled to the qubit protects the qubit from exposed to the electromagnetic environment of the readout circuit. A ″Purcell filter″ can also be added to suppress such decoherence further. In conclusion, we overviewed some qubit engineering techniques or ideas to improve the coherence time, which is a very important figure for building practical quantum computer/simulator. We hope that someone can combine and optimize these ideas, while interact with developments in materials and micro-fabrication technologies, to develop novel new generation superconducting qubit structures in the near future.
Superconducting devices as quantum bits (qubits) are one of the most promising candidates for implementing a practical quantum computer. Over the last decade, quantum coherence times of superconducting qubits have been continuously improved. Operating qubits in noise insensitive points, eliminating the participation of the lossy materials, and better isolation from environment increased the decoherence times from nanoseconds to tens of microseconds. One recent approach on the qubit design is to shunt the Josephson junctions with large capacitors to reduce the sensitivity to noise and to redistribute the stored electromagnetic energy in a well-engineered area. This approach was first applied on charge qubits and later adopted to other types of superconducting qubits. \n \nIn this thesis, we present the design and the characterization of a three-Josephson junction superconducting circuit with three large shunt capacitors. We present experiments on decoherence in the circuit used as a qubit. The qubit relaxation time T₁ is reaching as high as 47 μs and the spin-echo dephasing time T₂ = 9.4 μs. In addition, we present spectroscopy experiments and decoherence characterization in the qutrit subspace formed by the lowest three energy levels. The spectroscopy data is in excellent agreement with the complete circuit model based on the system capacitance matrix. At the flux symmetry point, the circuit has a large anharmonicity, defined as the difference between the 1-2 and 0-1 transition frequencies, approaching 2π × 3.7 GHz, which is enabling fast single qubit operations. We performed randomized benchmarking with the qubit gates with a duration of 1.62 ns and an average gate fidelity of 99.9%. \n \nMoreover, we present experiments with multi-level control in qutrit subspace, formed by the lowest three energy levels. We demonstrate a single step experimental implementation of a generalized Walsh-Hadamard gate. We use a decomposition of the quantum gate into two unitary operations, one implemented by an off-diagonal Hamiltonian and the other implemented by a diagonal Hamiltonian. The off-diagonal Hamiltonian is obtained by the simultaneous driving of the transitions between levels 0-1, 1-2, and 0-2, with the latter being a two-photon process. The diagonal Hamiltonian is effectively implemented by appropriately shifting the phases of adjacent pulses. The gate is characterized using tomography process and the average fidelity exceeds 90%, in good agreement with numerical simulations that take into account the multi-level structure of the system.
Abstract Superconducting qubits seem promising for useful quantum computers, but the currently wide-spread qubit designs and techniques do not yet provide high enough performance. Here, we introduce a superconducting-qubit type, the unimon, which combines the desired properties of increased anharmonicity, full insensitivity to dc charge noise, reduced sensitivity to flux noise, and a simple structure consisting only of a single Josephson junction in a resonator. In agreement with our quantum models, we measure the qubit frequency, ω01/(2π), and increased anharmonicity α/(2π) at the optimal operation point, yielding, for example, 99.9% and 99.8% fidelity for 13 ns single-qubit gates on two qubits with (ω01, α) = (4.49 GHz, 434 MHz) × 2π and (3.55 GHz, 744 MHz) × 2π, respectively. The energy relaxation seems to be dominated by dielectric losses. Thus, improvements of the design, materials, and gate time may promote the unimon to break the 99.99% fidelity target for efficient quantum error correction and possible useful quantum advantage with noisy systems.
Abstract Superconducting qubits seem promising for useful quantum computers, but the currently wide-spread qubit designs and techniques do not yet provide high enough performance. Here, we introduce a superconducting-qubit type, the unimon, which combines the desired properties of increased anharmonicity, full insensitivity to dc charge noise, reduced sensitivity to flux noise, and a simple structure consisting only of a single Josephson junction in a resonator. In agreement with our quantum models, we measure the qubit frequency, ω01/(2π), and increased anharmonicity α/(2π) at the optimal operation point, yielding, for example, 99.9% and 99.8% fidelity for 13 ns single-qubit gates on two qubits with (ω01, α) = (4.49 GHz, 434 MHz) × 2π and (3.55 GHz, 744 MHz) × 2π, respectively. The energy relaxation seems to be dominated by dielectric losses. Thus, improvements of the design, materials, and gate time may promote the unimon to break the 99.99% fidelity target for efficient quantum error correction and possible useful quantum advantage with noisy systems.