Abstract This chapter presents the principles of superconducting qubits. We start our discussion with a presentation of the Josephson effect. We then introduce the Cooper pair box and the transmon, the most widespread superconducting qubit. We study how to execute single-qubit gates by driving a superconducting qubit with electromagnetic pulses, and how to read out the state of a qubit by a transmission measurement. The last part of the chapter is devoted to the presentation of some two-qubit gates. Specifically, we illustrate the implementation of the iSWAP and square root of iSWAP gates and of the cross-resonance gate. The last section discusses tunable couplers
Abstract This chapter presents the principles of superconducting qubits. We start our discussion with a presentation of the Josephson effect. We then introduce the Cooper pair box and the transmon, the most widespread superconducting qubit. We study how to execute single-qubit gates by driving a superconducting qubit with electromagnetic pulses, and how to read out the state of a qubit by a transmission measurement. The last part of the chapter is devoted to the presentation of some two-qubit gates. Specifically, we illustrate the implementation of the iSWAP and square root of iSWAP gates and of the cross-resonance gate. The last section discusses tunable couplers
We introduce the notion of qubit as unit of quantum information, illustrating how this notion can be implemented in nonlinear superconducting circuits via the charge and current degrees of freedom. Within these two types of qubits, we discuss the charge qubit, the transmon, and the flux qubit, illustrating the nature of the states that implement the qubit subspace and how they can be controlled and measured. We discuss how qubits can interact with each other directly or through mediators, illustrating different limits of interaction, introducing the notion of dipolar electric and magnetic moments, and demonstrating the tunability of interactions by different means. The chapter closes with a brief study of qubit coherence along the history of this field, with an outlook to potential near-term improvements.
During this thesis, we have used superconducting circuits with Josephson junctions, derived from the Cooper pair box, in order to implement quantum bits (qubits). To implement two-qubit gates, we have developed a new circuit, the quantroswap, which consists in two capacitively coupled Cooper pair box, each of them being manipulated and read separately. We have demonstrated coherent exchange of energy between them, but we have also observed a problem of qubit instability. In order to avoid this spurious effect, we have implemented another circuit based on a charge insensitive split Cooper pair box coupled to a non-linear resonator for readout-out purpose. We have measured large coherence time, and obtained large readout fidelity (90%) using the bifurcation phenomenon. For metrological purpose, microwave reflectometry measurement on a quantronium also allowed us to relate an applied current I to the frequency f=I/2e of induced Bloch oscillations.
Units of superconducting circuitry that exploit the concept of the single- Cooper-pair box (SCB) have been built and are undergoing testing as prototypes of logic gates that could, in principle, constitute building blocks of clocked quantum computers. These units utilize quantized charge states as the quantum information-bearing degrees of freedom. An SCB is an artificial two-level quantum system that comprises a nanoscale superconducting electrode connected to a reservoir of Cooper-pair charges via a Josephson junction. The logical quantum states of the device, .0. and .1., are implemented physically as a pair of charge-number states that differ by 2e (where e is the charge of an electron). Typically, some 109 Cooper pairs are involved. Transitions between the logical states are accomplished by tunneling of Cooper pairs through the Josephson junction. Although the two-level system contains a macroscopic number of charges, in the superconducting regime, they behave collectively, as a Bose-Einstein condensate, making possible a coherent superposition of the two logical states. This possibility makes the SCB a candidate for the physical implementation of a qubit. A set of quantum logic operations and the gates that implement them is characterized as universal if, in principle, one can form combinations of the operations in the set to implement any desired quantum computation. To be able to design a practical quantum computer, one must first specify how to decompose any valid quantum computation into a sequence of elementary 1- and 2-qubit quantum gates that are universal and that can be realized in hardware that is feasible to fabricate. Traditionally, the set of universal gates has been taken to be the set of all 1-qubit quantum gates in conjunction with the controlled-NOT (CNOT) gate, which is a 2-qubit gate. Also, it has been known for some time that the SWAP gate, which implements square root of the simple 2-qubit exchange interaction, is as computationally universal as is the CNOT operation.
The concept of a quantum computer was invented in the beginning of the 1980s as a quantum generalization of the reversible classical computer. After discoveries in the middle of the 1990s of quantum algorithms, which wouldsolve some problems considered intractable for classical computers, the field of quantum computing has developed rapidly. A wide range of quantum systems are investigated for their possible ability to implement quantum algorithms in practice. The most promising solid state implementations are superconducting electrical circuits based on the Josephson effect, and the Coulomb blockade effect. Superconducting circuits are macroscopic quantum systems which can be fabricated using standard lithography technologies. Superconducting qubits - basic building blocks of a quantum computer - have been developed at several research laboratories, among others the MC2 here at Chalmers. This thesis presents a theoretical investigation of controllable coupling of superconducting qubits based on the single Cooper-pair box. Two coupling schemes are investigated in detail: current-controlled coupling via large Josephson junctions, and coupling via a superconducting stripline cavity. Both coupling designs are scalable and suitable for the charge regime of the single Cooper-pair box, as well as for the charge-phase regime where the qubit is better protected from environmental noise. Quantum gate protocols which are relevant for these physical couplings are discussed. The investigations show that, for both considered designs, the simplest two-qubit gate is the conditional phase-shift gate. This gate is universal for quantum computing, and it can create maximallyentangled qubit pairs in only one run. The investigation combines methods from electrical engineering, quantum mechanics and quantum computer science.
In this work we consider measurements on quantum systems emphasizing\non read-out of superconducting qubits. The qubit is always coupled to an\nenvironment, containing a macroscopic number of degrees of freedom. This\nperturbs the qubit and destroys the phase coherence of the quantum state.\nOne tries to minimize this destructive effect by encoding the quantum information in quantum states which do not couple strongly to the dominant\nnoise sources. It is therefore necessary to design read-out methods that can\ndistinguish these states.\n\nWe focus primarily on the single Cooper-pair box (SCB) charge qubit, whose\nproperties are based on the Josephson effect and Coulumb blockade in superconducting electrical circuits. By encoding the information in the qubit\nenergy eigenstates, it is possible to protect it from the most dangerous decoherence source - charge fluctuations in the environment. We investigate\nthe measurement setup, where the SCB is coupled to a lumped element LCoscillator whose resonance frequency is orders of magnitude smaller than the qubit energy splitting. In this regime the SCB will act as an effective positive or negative capacitance, depending on the quantum state. This quantum capacitance then shifts the oscillator resonance frequency, which can be detected in a homodyne phase measurement.\n\nWe have found that reading out a charge qubit by measuring its quantum\ncapacitance in this manner is quantum limited, independently of the oscillator\nquality factor Q. Moreover, we have found that the low-Q oscillator\nis advantageous for the measurement in two ways: first, such an oscillator\nbetter protects the qubit from thermal dephasing, and, second, it allows to\nincrease the speed of the read-out, making it possible to distinguish the qubit states in a single shot measurement.
We have analyzed and measured the quantum coherent dynamics of a circuit containing two coupled superconducting charge qubits. Each qubit is based on a Cooper pair box connected to a reservoir electrode through a Josephson junction. Two qubits are coupled electrostatically by a small island overlapping both Cooper pair boxes. Quantum state manipulation ofthe qubit circuit is done by applying non-adiabatic voltage pulses to the common gate. We read out each qubit by means of probe electrodes connected to Cooper pair boxes through high-Ohmic tunnel junctions. With such a setup the measured pulse-induced probe currents are proportional to the probability for each qubit to have an extra Cooper pai1r after the manipulation. As expected from theory and observed experimentally the measured pulse-induced current in each probe has two frequency components whose position on the frequency axis can be externally controlled. This is a result ofthe inter-qubit coupling which is also responsible for the avoided level crossing that we observed in the qubits' spectra. Our simulations show that in the absence of decoherence and with a rectangular pulse shape the system remains entangled most ofthe time reaching maximally entangled states at certain instances.