We have analyzed and measured the quantum coherent dynamics of a circuit containing two coupled superconducting charge qubits. Each qubit is based on a Cooper pair box connected to a reservoir electrode through a Josephson junction. Two qubits are coupled electrostatically by a small island overlapping both Cooper pair boxes. Quantum state manipulation ofthe qubit circuit is done by applying non-adiabatic voltage pulses to the common gate. We read out each qubit by means of probe electrodes connected to Cooper pair boxes through high-Ohmic tunnel junctions. With such a setup the measured pulse-induced probe currents are proportional to the probability for each qubit to have an extra Cooper pai1r after the manipulation. As expected from theory and observed experimentally the measured pulse-induced current in each probe has two frequency components whose position on the frequency axis can be externally controlled. This is a result ofthe inter-qubit coupling which is also responsible for the avoided level crossing that we observed in the qubits' spectra. Our simulations show that in the absence of decoherence and with a rectangular pulse shape the system remains entangled most ofthe time reaching maximally entangled states at certain instances.
We have analyzed and measured the quantum coherent dynamics of a circuit containing two coupled superconducting charge qubits. Each qubit is based on a Cooper pair box connected to a reservoir electrode through a Josephson junction. Two qubits are coupled electrostatically by a small island overlapping both Cooper pair boxes. Quantum state manipulation ofthe qubit circuit is done by applying non-adiabatic voltage pulses to the common gate. We read out each qubit by means of probe electrodes connected to Cooper pair boxes through high-Ohmic tunnel junctions. With such a setup the measured pulse-induced probe currents are proportional to the probability for each qubit to have an extra Cooper pai1r after the manipulation. As expected from theory and observed experimentally the measured pulse-induced current in each probe has two frequency components whose position on the frequency axis can be externally controlled. This is a result ofthe inter-qubit coupling which is also responsible for the avoided level crossing that we observed in the qubits' spectra. Our simulations show that in the absence of decoherence and with a rectangular pulse shape the system remains entangled most ofthe time reaching maximally entangled states at certain instances.
We have succeeded in coupling two solid-state qubits and observing quantum coherent dynamics of such a system. Each qubit is a Cooper-pair box whose quantum states are manipulated by means of pulse technique. Coupling of the two qubits is done by using a small on-chip capacitor. For read-out of the state of each qubit, we use probe electrodes connected to the Cooper-pair boxes through resistive tunnel junctions. Quantum coherent oscillation of the two-qubit charge states results in the oscillation of the probe currents. The observed "beatings" as well as avoided level crossing in the energy spectrum is a direct evidence for the interaction of the two qubits. Although we could not measure the amount of entanglement directly, our simulations based on the experimental data show that during quantum evolution the qubits remain entangled most of the time. A straightforward continuation of this experiment is a demonstration of conditional gate operation, a prototype of a solid-state quantum logic gate.
Abstract A nanometre-scale superconducting electrode connected to a reservoir via a Josephson junction constitutes an artificial two-level electronic system: a single-Cooper-pair box. The two levels consist of charge states (differing by 2e, where e is the electronic charge) that are coupled by tunnelling of Cooper pairs through the junction. Although the two-level system is macroscopic, containing a large number of electrons, the two charge states can be coherently superposed1, 2, 3, 4. The Cooper-pair box has therefore been suggested5, 6, 7 as a candidate for a quantum bit or ‘qubit’—the basic component of a quantum computer. Here we report the observation of quantum oscillations in a single-Cooper-pair box. By applying a short voltage pulse via a gate electrode, we can control the coherent quantum state evolution: the pulse modifies the energies of the two charge states non-adiabatically, bringing them into resonance. The resulting state—a superposition of the two charge states—is detected by a tunnelling current through a probe junction. Our results demonstrate electrical coherent control of a qubit in a solid-state electronic device.
This thesis presents measurements of quantum coherence in a single Cooper pair box, where quantum oscillations of charge between a reservoir and a small superconducting island have been observed. The single Cooper pair box (SCB) consists of a small metallic island which is connected to a reservoir via a tunnel junction. In the superconducting state, Cooper pairs are free to tunnel to and from the island, whose potential can be controlled by a gate voltage. A graded gap method was used to prevent quasiparticles from tunneling onto the island. For this purpose, a magnetic field suppressed the superconducting gap in the SCB leads more than in the island. This created an additional energy barrier for quasiparticles to tunnel to the island, making the gate voltage modulation periodic in Cooper pair charge. For a limited range of gate voltage, the SCB was found to behave as a model two-level quantum mechanical system. A non-adiabatic change in the induced island charge was used to bring two charge states into resonance. The resulting time evolution showed clear charge oscillations between the ground and excited state, with a frequency given by the energy level separation divided by Planck's constant. These oscillations had a longest coherence time of T2=9 ns at a point where the pure charge states are degenerate. The coherence time at this point was found to be limited by the relaxation rate, ?1. Away from this point, the coherence time was limited by the dephasing rate, ??. Away from the charge degeneracy, the dependence of T2 on gate charge suggested that low frequency fluctuators were the main source of dephasing. The charge of the Cooper pair box was measured by coupling the SCB capacitively to a radio frequency single electron transistor (RF-SET). The RF-SET was used as an electrometer by measuring the amount of reflection from a resonant microwave circuit in which a single electron transistor (SET) was embedded. A best charge sensitivity of 2.3·10-6 e/sqrt(Hz) and a 7 MHz bandwidth was reached in an improved setup. Another part of this thesis concerns an investigation of electrical filters for use in single electronics experiments. The characteristics of seven different types of cryogenic filters were evaluated.
During this thesis, we have used superconducting circuits with Josephson junctions, derived from the Cooper pair box, in order to implement quantum bits (qubits). To implement two-qubit gates, we have developed a new circuit, the quantroswap, which consists in two capacitively coupled Cooper pair box, each of them being manipulated and read separately. We have demonstrated coherent exchange of energy between them, but we have also observed a problem of qubit instability. In order to avoid this spurious effect, we have implemented another circuit based on a charge insensitive split Cooper pair box coupled to a non-linear resonator for readout-out purpose. We have measured large coherence time, and obtained large readout fidelity (90%) using the bifurcation phenomenon. For metrological purpose, microwave reflectometry measurement on a quantronium also allowed us to relate an applied current I to the frequency f=I/2e of induced Bloch oscillations.
We study the dynamics of a quantum superconducting circuit which consists of a Josephson charge qubit, coupled capacitively to a current biased Josephson junction. Under certain conditions, the eigenstates of the qubit and the junction become entangled. We obtain the time evolution of these states in the limit of weak coupling. Rabi oscillations occur, as a result of the spontaneous emission and re-absorption of a single oscillation quantum in the junction. We discuss a possible way to experimentally determine the quantum state of the junction and hence observe the Rabi oscillations.
Among the potential physical implementations of quantum bits (qubits) solid state devices appear most promising for large scale applications and integration in electronic circuits. Devices based on low-capacitance Josephson junctions exploit the coherence of the superconducting state, combined with the possibility to control individual charges by Coulomb blockade effects. The logical states in these systems differ by one Cooper-pair charge. Single- and two-bit operations can be performed by applying a sequence of gate voltages. The phase coherence time is sufficiently long to allow a series of these steps. If, in addition, the strength of the Josephson coupling is controlled (e.g. by currents in SQUID loops) the system is ideal for quantum computation. Recent experiments by Nakamura et al. show the feasibility of this approach. In addition to the manipulations of qubits the resulting quantum state has to be read out. This quantum measurement process can be accomplished by coupling a single-electron transistor (SET) capacitively to the qubit. We investigate the process by analyzing the time-evolution of the density matrix of the coupled system. The measurement process is characterized by three time scales: the dephasing time, which is fast when a dissipative current flows in the SET, a longer ‘measurement time’ needed to read out the signal, and a third, even longer ‘mixing time’, characterizing measurement induced transitions which destroy the information about the initial quantum state. The noise spectrum of the current in the SET displays these time scales and allows their direct observation.