© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

Read-out of superconducting qubits - a quantum measurement process

Lars Tornberg

Published Jan 1, 2007• 0 citations

Abstract

In this work we consider measurements on quantum systems emphasizing\non read-out of superconducting qubits. The qubit is always coupled to an\nenvironment, containing a macroscopic number of degrees of freedom. This\nperturbs the qubit and destroys the phase coherence of the quantum state.\nOne tries to minimize this destructive effect by encoding the quantum information in quantum states which do not couple strongly to the dominant\nnoise sources. It is therefore necessary to design read-out methods that can\ndistinguish these states.\n\nWe focus primarily on the single Cooper-pair box (SCB) charge qubit, whose\nproperties are based on the Josephson effect and Coulumb blockade in superconducting electrical circuits. By encoding the information in the qubit\nenergy eigenstates, it is possible to protect it from the most dangerous decoherence source - charge fluctuations in the environment. We investigate\nthe measurement setup, where the SCB is coupled to a lumped element LCoscillator whose resonance frequency is orders of magnitude smaller than the qubit energy splitting. In this regime the SCB will act as an effective positive or negative capacitance, depending on the quantum state. This quantum capacitance then shifts the oscillator resonance frequency, which can be detected in a homodyne phase measurement.\n\nWe have found that reading out a charge qubit by measuring its quantum\ncapacitance in this manner is quantum limited, independently of the oscillator\nquality factor Q. Moreover, we have found that the low-Q oscillator\nis advantageous for the measurement in two ways: first, such an oscillator\nbetter protects the qubit from thermal dephasing, and, second, it allows to\nincrease the speed of the read-out, making it possible to distinguish the qubit states in a single shot measurement.

Related papers

Josephson-Junction Qubits

Yuriy Makhlin, Gerd Schön, Alexander Shnirman

Among the potential physical implementations of quantum bits (qubits) solid state devices appear most promising for large scale applications and integration in electronic circuits. Devices based on low-capacitance Josephson junctions exploit the coherence of the superconducting state, combined with the possibility to control individual charges by Coulomb blockade effects. The logical states in these systems differ by one Cooper-pair charge. Single- and two-bit operations can be performed by applying a sequence of gate voltages. The phase coherence time is sufficiently long to allow a series of these steps. If, in addition, the strength of the Josephson coupling is controlled (e.g. by currents in SQUID loops) the system is ideal for quantum computation. Recent experiments by Nakamura et al. show the feasibility of this approach. In addition to the manipulations of qubits the resulting quantum state has to be read out. This quantum measurement process can be accomplished by coupling a single-electron transistor (SET) capacitively to the qubit. We investigate the process by analyzing the time-evolution of the density matrix of the coupled system. The measurement process is characterized by three time scales: the dephasing time, which is fast when a dissipative current flows in the SET, a longer ‘measurement time’ needed to read out the signal, and a third, even longer ‘mixing time’, characterizing measurement induced transitions which destroy the information about the initial quantum state. The noise spectrum of the current in the SET displays these time scales and allows their direct observation.

Fortschritte der Physik•Sep 1, 2000•9 citations

Fast quantum limited readout of a superconducting qubit using a slow oscillator

Göran Johansson, Lars Tornberg, Christopher M. Wilson

We describe how to perform fast quantum limited readout of a solid state qubit biased at its degeneracy point. The method is based on homodyne detection of the phase of a microwave signal reflected by a slow oscillator coupled to the qubit. Analyzing the whole quantum readout process, we find that the detection is indeed quantum limited and that this limit may be reached even using a resonance circuit with a low quality factor, thus enabling the use of short measurement pulses. As an example, we discuss in detail the readout of a Cooper-pair box capacitively coupled to a lumped element $\mathit{LC}$ oscillator. Furthermore, we give formulas for the backaction while not measuring, and discuss optimal parameters for a realistic design capable of fast $(\ensuremath{\sim}50\phantom{\rule{0.3em}{0ex}}\mathrm{ns})$ single-shot readout.

arXiv:cond-mat/0602583•Physical Review B•Sep 15, 2006•44 citations

Josephson-Junction Qubits and the Readout Process by Single-Electron Transistors

Yuriy Makhlin, Gerd Schön, Alexander Shnirman

Several physical realizations of quantum bits have been proposed. Of those, nano-electronic devices appear most suitable for large-scale integration and potential applications. We suggest to use low-capacitance Josephson junctions, exploiting the coherence of tunneling in the superconducting state combined with the possibility to control individual charges by Coulomb blockade effects (cond-mat/9706016,cond-mat/9808067). These systems constitute quantum bits, with logical states differing by one Cooper-pair charge. Single- and two-bit operations can be performed by applying a sequence of gate voltages. The phase coherence time is sufficiently long to allow a series of these steps. In addition to the manipulation of qubits the resulting quantum state has to be read out. This can be accomplished by coupling a single-electron transistor capacitively to the qubit (cond-mat/9801125). To describe this quantum measurement process we study the time evolution of the density matrix of the coupled system. Only when a transport voltage is turned on, the transistor destroys the phase coherence of the qubit; in this case within a short time. The measurement is accomplished after a longer time scale, when the signal resolves the different quantum states. At still longer times the measurement process itself destroys the information about the initial state. We present a suitable set of system parameters, which can be realized by present-day technology.

arXiv:cond-mat/9811029•Nov 3, 1998•10 citations

Superconducting Qubits: Charge read-out and backaction

Andreas Käck

For quantum computers to become reality, not only do the qubits have to be carefully engineered to be well isolated during operation time, but this also puts great strain on the measurement setup. We have looked at the backaction from a single-electron transistor (SET), operated both in the normal and in the superconducting state, on a single Cooper-pair box qubit. We have also designed a new read-out setup for a flux qubit using a Cooper-pair transistor that would allow read-out at the flux degeneracy point. In the first case we calculate the mixing time and the influence on the qubit steady-state distribution. We find that the mixing time is larger than typical experimental measurement times, indicating the possibility of single shot read-out. For the steady-state distribution of the qubit, we calculate the Coulomb staircase, finding additional structure due to the noise in the SET. For the flux qubit we design a read-out scheme involving a quantum flip-flop process, where the measurement outcome results in the presence or absence of an incoherent tunneling process. We estimate read-out and mixing times and find that single shot read-out should be achievable.

•Jan 1, 2004•0 citations

Cooper pair box circuits (two-qubit gate, single-shot readout, and current to frequency conversion)

François Nguyen, ESTEVE, Daniel

During this thesis, we have used superconducting circuits with Josephson junctions, derived from the Cooper pair box, in order to implement quantum bits (qubits). To implement two-qubit gates, we have developed a new circuit, the quantroswap, which consists in two capacitively coupled Cooper pair box, each of them being manipulated and read separately. We have demonstrated coherent exchange of energy between them, but we have also observed a problem of qubit instability. In order to avoid this spurious effect, we have implemented another circuit based on a charge insensitive split Cooper pair box coupled to a non-linear resonator for readout-out purpose. We have measured large coherence time, and obtained large readout fidelity (90%) using the bifurcation phenomenon. For metrological purpose, microwave reflectometry measurement on a quantronium also allowed us to relate an applied current I to the frequency f=I/2e of induced Bloch oscillations.

•Jan 1, 2008•0 citations

Quantum coherent dynamics of two coupled superconducting charge qubits

Yu. A. Pashkin, O. V. Astafiev, Tsuyoshi Yamamoto +5 more

We have analyzed and measured the quantum coherent dynamics of a circuit containing two coupled superconducting charge qubits. Each qubit is based on a Cooper pair box connected to a reservoir electrode through a Josephson junction. Two qubits are coupled electrostatically by a small island overlapping both Cooper pair boxes. Quantum state manipulation ofthe qubit circuit is done by applying non-adiabatic voltage pulses to the common gate. We read out each qubit by means of probe electrodes connected to Cooper pair boxes through high-Ohmic tunnel junctions. With such a setup the measured pulse-induced probe currents are proportional to the probability for each qubit to have an extra Cooper pai1r after the manipulation. As expected from theory and observed experimentally the measured pulse-induced current in each probe has two frequency components whose position on the frequency axis can be externally controlled. This is a result ofthe inter-qubit coupling which is also responsible for the avoided level crossing that we observed in the qubits' spectra. Our simulations show that in the absence of decoherence and with a rectangular pulse shape the system remains entangled most ofthe time reaching maximally entangled states at certain instances.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jun 1, 2005•0 citations

In this work we consider measurements on quantum systems emphasizing\non read-out of superconducting qubits. The qubit is always coupled to an\nenvironment, containing a macroscopic number of degrees of freedom. This\nperturbs the qubit and destroys the phase coherence of the quantum state.\nOne tries to minimize this destructive effect by encoding the quantum information in quantum states which do not couple strongly to the dominant\nnoise sources. It is therefore necessary to design read-out methods that can\ndistinguish these states.\n\nWe focus primarily on the single Cooper-pair box (SCB) charge qubit, whose\nproperties are based on the Josephson effect and Coulumb blockade in superconducting electrical circuits. By encoding the information in the qubit\nenergy eigenstates, it is possible to protect it from the most dangerous decoherence source - charge fluctuations in the environment. We investigate\nthe measurement setup, where the SCB is coupled to a lumped element LCoscillator whose resonance frequency is orders of magnitude smaller than the qubit energy splitting. In this regime the SCB will act as an effective positive or negative capacitance, depending on the quantum state. This quantum capacitance then shifts the oscillator resonance frequency, which can be detected in a homodyne phase measurement.\n\nWe have found that reading out a charge qubit by measuring its quantum\ncapacitance in this manner is quantum limited, independently of the oscillator\nquality factor Q. Moreover, we have found that the low-Q oscillator\nis advantageous for the measurement in two ways: first, such an oscillator\nbetter protects the qubit from thermal dephasing, and, second, it allows to\nincrease the speed of the read-out, making it possible to distinguish the qubit states in a single shot measurement.

Among the potential physical implementations of quantum bits (qubits) solid state devices appear most promising for large scale applications and integration in electronic circuits. Devices based on low-capacitance Josephson junctions exploit the coherence of the superconducting state, combined with the possibility to control individual charges by Coulomb blockade effects. The logical states in these systems differ by one Cooper-pair charge. Single- and two-bit operations can be performed by applying a sequence of gate voltages. The phase coherence time is sufficiently long to allow a series of these steps. If, in addition, the strength of the Josephson coupling is controlled (e.g. by currents in SQUID loops) the system is ideal for quantum computation. Recent experiments by Nakamura et al. show the feasibility of this approach. In addition to the manipulations of qubits the resulting quantum state has to be read out. This quantum measurement process can be accomplished by coupling a single-electron transistor (SET) capacitively to the qubit. We investigate the process by analyzing the time-evolution of the density matrix of the coupled system. The measurement process is characterized by three time scales: the dephasing time, which is fast when a dissipative current flows in the SET, a longer ‘measurement time’ needed to read out the signal, and a third, even longer ‘mixing time’, characterizing measurement induced transitions which destroy the information about the initial quantum state. The noise spectrum of the current in the SET displays these time scales and allows their direct observation.

We describe how to perform fast quantum limited readout of a solid state qubit biased at its degeneracy point. The method is based on homodyne detection of the phase of a microwave signal reflected by a slow oscillator coupled to the qubit. Analyzing the whole quantum readout process, we find that the detection is indeed quantum limited and that this limit may be reached even using a resonance circuit with a low quality factor, thus enabling the use of short measurement pulses. As an example, we discuss in detail the readout of a Cooper-pair box capacitively coupled to a lumped element

\mathit{LC}

oscillator. Furthermore, we give formulas for the backaction while not measuring, and discuss optimal parameters for a realistic design capable of fast $(\ensuremath{\sim}50\phantom{\rule{0.3em}{0ex}}\mathrm{ns})$ single-shot readout.

Several physical realizations of quantum bits have been proposed. Of those, nano-electronic devices appear most suitable for large-scale integration and potential applications. We suggest to use low-capacitance Josephson junctions, exploiting the coherence of tunneling in the superconducting state combined with the possibility to control individual charges by Coulomb blockade effects (cond-mat/9706016,cond-mat/9808067). These systems constitute quantum bits, with logical states differing by one Cooper-pair charge. Single- and two-bit operations can be performed by applying a sequence of gate voltages. The phase coherence time is sufficiently long to allow a series of these steps. In addition to the manipulation of qubits the resulting quantum state has to be read out. This can be accomplished by coupling a single-electron transistor capacitively to the qubit (cond-mat/9801125). To describe this quantum measurement process we study the time evolution of the density matrix of the coupled system. Only when a transport voltage is turned on, the transistor destroys the phase coherence of the qubit; in this case within a short time. The measurement is accomplished after a longer time scale, when the signal resolves the different quantum states. At still longer times the measurement process itself destroys the information about the initial state. We present a suitable set of system parameters, which can be realized by present-day technology.

For quantum computers to become reality, not only do the qubits have to be carefully engineered to be well isolated during operation time, but this also puts great strain on the measurement setup. We have looked at the backaction from a single-electron transistor (SET), operated both in the normal and in the superconducting state, on a single Cooper-pair box qubit. We have also designed a new read-out setup for a flux qubit using a Cooper-pair transistor that would allow read-out at the flux degeneracy point. In the first case we calculate the mixing time and the influence on the qubit steady-state distribution. We find that the mixing time is larger than typical experimental measurement times, indicating the possibility of single shot read-out. For the steady-state distribution of the qubit, we calculate the Coulomb staircase, finding additional structure due to the noise in the SET. For the flux qubit we design a read-out scheme involving a quantum flip-flop process, where the measurement outcome results in the presence or absence of an incoherent tunneling process. We estimate read-out and mixing times and find that single shot read-out should be achievable.

During this thesis, we have used superconducting circuits with Josephson junctions, derived from the Cooper pair box, in order to implement quantum bits (qubits). To implement two-qubit gates, we have developed a new circuit, the quantroswap, which consists in two capacitively coupled Cooper pair box, each of them being manipulated and read separately. We have demonstrated coherent exchange of energy between them, but we have also observed a problem of qubit instability. In order to avoid this spurious effect, we have implemented another circuit based on a charge insensitive split Cooper pair box coupled to a non-linear resonator for readout-out purpose. We have measured large coherence time, and obtained large readout fidelity (90%) using the bifurcation phenomenon. For metrological purpose, microwave reflectometry measurement on a quantronium also allowed us to relate an applied current I to the frequency f=I/2e of induced Bloch oscillations.

We have analyzed and measured the quantum coherent dynamics of a circuit containing two coupled superconducting charge qubits. Each qubit is based on a Cooper pair box connected to a reservoir electrode through a Josephson junction. Two qubits are coupled electrostatically by a small island overlapping both Cooper pair boxes. Quantum state manipulation ofthe qubit circuit is done by applying non-adiabatic voltage pulses to the common gate. We read out each qubit by means of probe electrodes connected to Cooper pair boxes through high-Ohmic tunnel junctions. With such a setup the measured pulse-induced probe currents are proportional to the probability for each qubit to have an extra Cooper pai1r after the manipulation. As expected from theory and observed experimentally the measured pulse-induced current in each probe has two frequency components whose position on the frequency axis can be externally controlled. This is a result ofthe inter-qubit coupling which is also responsible for the avoided level crossing that we observed in the qubits' spectra. Our simulations show that in the absence of decoherence and with a rectangular pulse shape the system remains entangled most ofthe time reaching maximally entangled states at certain instances.