The concept of a quantum computer was invented in the beginning of the 1980s as a quantum generalization of the reversible classical computer. After discoveries in the middle of the 1990s of quantum algorithms, which wouldsolve some problems considered intractable for classical computers, the field of quantum computing has developed rapidly. A wide range of quantum systems are investigated for their possible ability to implement quantum algorithms in practice. The most promising solid state implementations are superconducting electrical circuits based on the Josephson effect, and the Coulomb blockade effect. Superconducting circuits are macroscopic quantum systems which can be fabricated using standard lithography technologies. Superconducting qubits - basic building blocks of a quantum computer - have been developed at several research laboratories, among others the MC2 here at Chalmers. This thesis presents a theoretical investigation of controllable coupling of superconducting qubits based on the single Cooper-pair box. Two coupling schemes are investigated in detail: current-controlled coupling via large Josephson junctions, and coupling via a superconducting stripline cavity. Both coupling designs are scalable and suitable for the charge regime of the single Cooper-pair box, as well as for the charge-phase regime where the qubit is better protected from environmental noise. Quantum gate protocols which are relevant for these physical couplings are discussed. The investigations show that, for both considered designs, the simplest two-qubit gate is the conditional phase-shift gate. This gate is universal for quantum computing, and it can create maximallyentangled qubit pairs in only one run. The investigation combines methods from electrical engineering, quantum mechanics and quantum computer science.
The concept of a quantum computer was invented in the beginning of the 1980s as a quantum generalization of the reversible classical computer. After discoveries in the middle of the 1990s of quantum algorithms, which wouldsolve some problems considered intractable for classical computers, the field of quantum computing has developed rapidly. A wide range of quantum systems are investigated for their possible ability to implement quantum algorithms in practice. The most promising solid state implementations are superconducting electrical circuits based on the Josephson effect, and the Coulomb blockade effect. Superconducting circuits are macroscopic quantum systems which can be fabricated using standard lithography technologies. Superconducting qubits - basic building blocks of a quantum computer - have been developed at several research laboratories, among others the MC2 here at Chalmers. This thesis presents a theoretical investigation of controllable coupling of superconducting qubits based on the single Cooper-pair box. Two coupling schemes are investigated in detail: current-controlled coupling via large Josephson junctions, and coupling via a superconducting stripline cavity. Both coupling designs are scalable and suitable for the charge regime of the single Cooper-pair box, as well as for the charge-phase regime where the qubit is better protected from environmental noise. Quantum gate protocols which are relevant for these physical couplings are discussed. The investigations show that, for both considered designs, the simplest two-qubit gate is the conditional phase-shift gate. This gate is universal for quantum computing, and it can create maximallyentangled qubit pairs in only one run. The investigation combines methods from electrical engineering, quantum mechanics and quantum computer science.
The technologies of Josephson-junction-based qubits have been progressing rapidly, ever since its first demonstration by a superconducting charge qubit1. A variety of systems have been implemented with remarkable progress in coherence time and read-out schemes. Although the current level of this solid-state device is still not as advanced as that of the most advanced microscopic-system-based qubits, these developments, together with the potential scalability, have renewed its position as a strong candidate as a building block for the quantum computer. Recently, coherent oscillation and microwave spectroscopy in capacitively-coupled superconducting qubits have been reported. The next challenging step toward quantum computation is a realization of logic gates. Here we demonstrate a conditional gate operation using a pair of coupled superconducting charge qubits. Using a pulse technique, we prepare different input states and show that they can be transformed by controlled-NOT (C-NOT) gate operation in the amplitude of the states. Although the phase evolution during the gate operation is still to be clarified, the present results are a major step toward the realization of a universal solid-state quantum gate.
Units of superconducting circuitry that exploit the concept of the single- Cooper-pair box (SCB) have been built and are undergoing testing as prototypes of logic gates that could, in principle, constitute building blocks of clocked quantum computers. These units utilize quantized charge states as the quantum information-bearing degrees of freedom. An SCB is an artificial two-level quantum system that comprises a nanoscale superconducting electrode connected to a reservoir of Cooper-pair charges via a Josephson junction. The logical quantum states of the device, .0. and .1., are implemented physically as a pair of charge-number states that differ by 2e (where e is the charge of an electron). Typically, some 109 Cooper pairs are involved. Transitions between the logical states are accomplished by tunneling of Cooper pairs through the Josephson junction. Although the two-level system contains a macroscopic number of charges, in the superconducting regime, they behave collectively, as a Bose-Einstein condensate, making possible a coherent superposition of the two logical states. This possibility makes the SCB a candidate for the physical implementation of a qubit. A set of quantum logic operations and the gates that implement them is characterized as universal if, in principle, one can form combinations of the operations in the set to implement any desired quantum computation. To be able to design a practical quantum computer, one must first specify how to decompose any valid quantum computation into a sequence of elementary 1- and 2-qubit quantum gates that are universal and that can be realized in hardware that is feasible to fabricate. Traditionally, the set of universal gates has been taken to be the set of all 1-qubit quantum gates in conjunction with the controlled-NOT (CNOT) gate, which is a 2-qubit gate. Also, it has been known for some time that the SWAP gate, which implements square root of the simple 2-qubit exchange interaction, is as computationally universal as is the CNOT operation.
During this thesis, we have used superconducting circuits with Josephson junctions, derived from the Cooper pair box, in order to implement quantum bits (qubits). To implement two-qubit gates, we have developed a new circuit, the quantroswap, which consists in two capacitively coupled Cooper pair box, each of them being manipulated and read separately. We have demonstrated coherent exchange of energy between them, but we have also observed a problem of qubit instability. In order to avoid this spurious effect, we have implemented another circuit based on a charge insensitive split Cooper pair box coupled to a non-linear resonator for readout-out purpose. We have measured large coherence time, and obtained large readout fidelity (90%) using the bifurcation phenomenon. For metrological purpose, microwave reflectometry measurement on a quantronium also allowed us to relate an applied current I to the frequency f=I/2e of induced Bloch oscillations.
Abstract A nanometre-scale superconducting electrode connected to a reservoir via a Josephson junction constitutes an artificial two-level electronic system: a single-Cooper-pair box. The two levels consist of charge states (differing by 2e, where e is the electronic charge) that are coupled by tunnelling of Cooper pairs through the junction. Although the two-level system is macroscopic, containing a large number of electrons, the two charge states can be coherently superposed1, 2, 3, 4. The Cooper-pair box has therefore been suggested5, 6, 7 as a candidate for a quantum bit or ‘qubit’—the basic component of a quantum computer. Here we report the observation of quantum oscillations in a single-Cooper-pair box. By applying a short voltage pulse via a gate electrode, we can control the coherent quantum state evolution: the pulse modifies the energies of the two charge states non-adiabatically, bringing them into resonance. The resulting state—a superposition of the two charge states—is detected by a tunnelling current through a probe junction. Our results demonstrate electrical coherent control of a qubit in a solid-state electronic device.
The last two decades have seen an enormous increase in the computational power of digital computers. This was due to the rapid technical development in manufacturing processes and controlling semiconducting structures on submicron scale. Concurrently, the electric circuits have encountered the first signs of the realm of quantum mechanics. Those effects may induce noise and thus they are typically considered harmful. However, the manipulation of the coherent quantum states might turn out be the basis of powerful computers – quantum computers. There, the computation is encoded into the unitary time evolution of a quantum mechanical state vector. Eventually, quantum mechanics could enable one, for example, to read secret electronic messages which are encrypted by the widely employed RSA cryptosystem – a task which is extremely laborious for the current digital computers. This thesis presents a theoretical study of the coherent manipulations of pure quantum states in a quantum register, that is, quantum algorithms. An implementation of a quantum algorithm involves the initialization of the input state and its manipulation with quantum gates followed by the measurements. The physical implementation of each gate requires that it is decomposed into low-level gates whose physical realizations are explicitly known. Here, the problem is examined from two directions. Firstly, the numerical optimization scheme for controlling time-evolution of a closed quantum system is discussed. This yields a method for implementing quantum gates acting on up to three quantum bits, qubits. The approach is independent of the physical realization of the quantum computer, but it is considered explicitly for a proposed inductively coupled Josephson charge qubit register. Secondly, the techniques of numerical matrix computation are utilized to find a general method for decomposing an arbitrary n-qubit gate into a sequence of elementary gates, which act on one or two qubits. The results of this thesis help to improve the implementation of quantum algorithms. The quantum circuit construction developed in the thesis is the first one to achieve the asymptotically minimal complexity in the number of elementary gates. In context of acceleration of quantum algorithms we present a gate-level study of Shor's algorithm and show how to accelerate the algorithm by merging several elementary gates into multiqubit gates. Finally, the requirements set by the resulting gate array are compared to the properties of superconducting qubits. This allows us to discuss the feasibility of the Josephson charge qubit register, for instance, as hardware for breaking the RSA cryptosystem.
The thesis investigates three challenges in superconducting quantum computing: efficient quantum gate compilation, scalable microwave interfacing of quantum processors (QPUs), and electrical annealing of Josephson junctions.The first part addresses an inefficiency in contemporary two-qubit gate compilation. Universal quantum computation requires only a single entangling two-qubit gate alongside single-qubit rotations, but this minimal gate set requires up to three additional two-qubit gates for every unsupported gate. I show how access to multiple inequivalent two-qubit gate classes overcomes this inefficiency. I experimentally realised an unsupported SWAP operation using one parametric CZ and one parametric iSWAP gate on a circuit-QED architecture. A Kraus-Cirac analysis shows that this combination belongs to the SWAP equivalency class, the fundamental reason for the reduction in two-qubit gates. The experiment demonstrates a rare case of simultaneous CZ and iSWAP support in the same quantum circuit, illustrating how access to multiple inequivalent gate classes can reduce compilation overhead on real hardware.The second part explores direct digital synthesis of microwave signals for interfacing with quantum processors. Conventional control uses heterodyne upconversion with IQ mixers, requiring compensation of LO leakage and IQ skew. I investigated a mixerless architecture based on high-speed DAC/ADC systems to generate and analyse the required microwave signals. CZ and iSWAP gate experiments subsequently verify that the platform is equivalent to conventional QPU setups.The third part investigates post-fabrication electrical tuning of Josephson junctions, in which voltage pulses modify junction resistance to correct fabrication-induced transmon-frequency variations. The speed of resistance change was found to depend exponentially on pulse amplitude. A novel stepwise protocol achieved a 270% resistance increase in an 11-month-old 11.5 kΩ junction, corresponding to a ~2 GHz reduction in transmon frequency, the largest reported selective resistance modification to date. Simulations show that resistance, charging-energy, and superconducting-gap uncertainties contribute equally to the uncertainty in the final qubit frequency. The results support a picture where electrical manipulation modifies the energy landscape, accelerating natural junction ageing.The thesis demonstrates that investigating gate-level compilation strategies, fully digital QPU control, and post-fabrication tuning, helps advance the understanding of how to approach scalable superconducting quantum processors.