Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Realization of a 2-V Programmable Josephson Junction Array Using Balanced Segmentation Scheme

Wenhui Cao, Jinjin Li, Yuan Zhong, Qing Zhong, Da Xiong Xu, Xueshen Wang, Xiaolong Xu

Published Nov 4, 2022• 6 citations
Publisher

Abstract

This article proposes a balanced segmentation scheme to improve the microwave transmission and develops a 2-V programmable Josephson junction array using double-stacked superconductor-normal-metal-superconductor Josephson junctions. The junction numbers of the sub-Josephson arrays are divided into a ternary sequence. The least significant bit is one stack or two junctions. In order to characterize the chip with many subarrays, an automatic measurement system with self-made multichannel current sources was established. It can analyze the critical current, the margin of the voltage steps, and the number of junctions in each subarray. The measurement found that the mentioned junction arrays can work at several microwave frequency ranges with an operating margin higher than 1.5 mA. Moreover, the circuit can produce intrinsically stable dc voltages from –2 to +2 V and generate stepwise-approximated ac voltages.

DOI
10.1109/tasc.2022.3216605

Related papers

Stacked SNS Josephson junction arrays for quantum voltage standards

Paul D. Dresselhaus, Yonuk Chong, J. H. Plantenberg +1 more

NIST is using and developing superconductor-normal metal-superconductor (SNS) Josephson arrays for both programmable DC and AC voltage standards. Increasing the output voltage is difficult because the output voltage per junction is small; hence series arrays with large numbers of junctions are needed. The best way to generate higher voltages and achieve the best operating margins for the broadband drive signals is by densely packing the junctions into shorter arrays. NIST has been working on stacked SNS junctions to achieve this goal. By stacking junctions in the array, more junctions may be placed per length, while preserving a lumped microwave element. In this paper we introduce our results on stacked SNS junctions using MoSi/sub 2/ and Ti as barrier materials. These barriers were chosen because they can be reactive-ion etched (RIE) in contrast to our standard PdAu barriers, which must be wet etched. Using RIE, alternating layers of barrier material and Nb may be etched in a single step. We indirectly quantify the junction uniformity in the arrays by measuring the current range of the constant-voltage steps when the arrays are biased with a microwave drive.

IEEE Transactions on Applied Superconductivity•Jun 1, 2003•35 citations

Development of 0.5-V Josephson junction array devices for quantum voltage standards*

Lanruo Wang, Jinjin Li, Wenhui Cao +2 more

The design, fabrication, and the characterization of a 0.5-V Josephson junction array device are presented for the quantum voltage standards in the National Institute of Metrology (NIM) of China. The device consists of four junction arrays, each of which has 1200 3-stacked Nb/Nb x Si1−x /Nb junctions and an on-chip superconducting microwave circuit which is mainly a power divider enabling each Josephson array being loaded with an equal amount of microwave power. A direct current (dc) quantum voltage of about 0.5 V with a ∼1-mA current margin of the 1st quantum voltage step is obtained. To further prove the quality of NIM device, a comparison between the NIM device with the National Institute of Standards and Technology (NIST) programmable Josephson voltage standard (PJVS) system device is conducted. The difference of the reproduced 0.5-V quantum voltage between the two devices is about 0.55 nV, which indicates good agreement between the two devices. With the homemade device, we have realized a precise and applicable 0.5-V applicable-level quantum voltage.

Chinese Physics B•Jun 1, 2019•5 citations

10 V programmable Josephson voltage standard circuits using NbN∕TiNx∕NbN∕TiNx∕NbN double-junction stacks

Hirotake Yamamori, Mayumi Ishizaki, Alexandre Shoji +2 more

Using NbN∕TiNx∕NbN∕TiNx∕NbN double-junction stack technology we have demonstrated a programmable Josephson voltage standard chip that operates up to 10.16V output voltage cooled with a two-stage Gifford–McMahon cryocooler. The circuit uses double-junction stacks, where two junctions are fabricated in each stack, in order to integrate 327 680 junctions into a 15.3mm×15.3mm chip. A 1-to-32 microwave distribution circuit is also integrated on the chip. The chip is divided into 22 cells, which perform as an 11-bit digital-to-analog converter. The 21 working cells include 307 200 junctions biased with 16GHz microwaves at 10.2K that generated flat voltage steps with current margins greater than 1mA, which indicates good uniformity of the stacked junctions.

Applied Physics Letters•Jan 23, 2006•91 citations

10 Volt Programmable Josephson Voltage Standard Circuits Using NbSi-Barrier Junctions

Paul D. Dresselhaus, Michael M. Elsbury, David I. Olaya +2 more

Programmable Josephson voltage standard (PJVS) circuits were developed that operate at 16 GHz to 20 GHz with operating margins larger than 1 mA. Two circuit designs were demonstrated, each having a total of ~ 300,000 junctions, which were divided into either 16 or 32 sub-arrays. Triple-stacked junctions were used in order to fit the ~300,000 junctions on each circuit. The amorphous NbxSi1-x-barrier junction technology provided a high degree of uniformity of the barrier and junction electrical properties, which was necessary to achieve the 1 mA operating margin. Although the margins on both the 16-array and 32-array circuits were much greater than 1 mA, the circuit yield for the 16-array design was lower because the longer arrays are more sensitive to defects. The use of lumped-element microwave splitters and tapered arrays significantly reduced the microwave input power and increased the operating margins of these designs. In addition, the broadband microwave response of the designs allowed the PJVS output voltage to be continuously adjusted by using the microwave frequency while remaining on margins.

IEEE Transactions on Applied Superconductivity•Nov 9, 2010•61 citations

10 V SINIS Josephson junction series arrays for programmable voltage standards

J. Kohlmann, H. Schulze, Ralf Behr +2 more

A programmable dc voltage standard for output voltages of up to 10 V has been realized. The series arrays, consisting of about 69120 overdamped superconductor/insulator/normal metal/insulator/superconductor (SINIS) Josephson junctions, have been fabricated using the reliable Nb-Al/Al/sub 2/O/sub 3/ technology. The arrays can be operated in conventional Josephson voltage standards at microwave frequencies from 70 GHz to 75 GHz. Steps of constant voltage are observed at very low microwave power levels, since the major part of the microwave power is generated by the junctions themselves. The operation of the arrays and the formation of Shapiro steps are discussed.

IEEE Transactions on Instrumentation and Measurement•Apr 1, 2001•20 citations

Superconductor-normal-superconductor junctions for programmable voltage standards

S. P. Benz

Series arrays of Nb–PdAu–Nb Josephson junctions were fabricated with characteristics ideally suited for application in programmable voltage standards and D/A converters with fundamental accuracy. Large arrays of junctions with applied microwave power showed constant voltage steps with current amplitudes as large as 7 mA. A novel coplanar waveguide design enabled uniform microwave power coupling to a five-segment array of 8192 junctions, so each segment had constant voltage steps over the same bias range. The 8192-junction device generated 1.1 mA steps at 186 mV with 11 GHz power and a maximum constant voltage step of 260 mV at 15.34 GHz.

Applied Physics Letters•Oct 30, 1995•131 citations
This article proposes a balanced segmentation scheme to improve the microwave transmission and develops a 2-V programmable Josephson junction array using double-stacked superconductor-normal-metal-superconductor Josephson junctions. The junction numbers of the sub-Josephson arrays are divided into a ternary sequence. The least significant bit is one stack or two junctions. In order to characterize the chip with many subarrays, an automatic measurement system with self-made multichannel current sources was established. It can analyze the critical current, the margin of the voltage steps, and the number of junctions in each subarray. The measurement found that the mentioned junction arrays can work at several microwave frequency ranges with an operating margin higher than 1.5 mA. Moreover, the circuit can produce intrinsically stable dc voltages from –2 to +2 V and generate stepwise-approximated ac voltages.
NIST is using and developing superconductor-normal metal-superconductor (SNS) Josephson arrays for both programmable DC and AC voltage standards. Increasing the output voltage is difficult because the output voltage per junction is small; hence series arrays with large numbers of junctions are needed. The best way to generate higher voltages and achieve the best operating margins for the broadband drive signals is by densely packing the junctions into shorter arrays. NIST has been working on stacked SNS junctions to achieve this goal. By stacking junctions in the array, more junctions may be placed per length, while preserving a lumped microwave element. In this paper we introduce our results on stacked SNS junctions using MoSi/sub 2/ and Ti as barrier materials. These barriers were chosen because they can be reactive-ion etched (RIE) in contrast to our standard PdAu barriers, which must be wet etched. Using RIE, alternating layers of barrier material and Nb may be etched in a single step. We indirectly quantify the junction uniformity in the arrays by measuring the current range of the constant-voltage steps when the arrays are biased with a microwave drive.
The design, fabrication, and the characterization of a 0.5-V Josephson junction array device are presented for the quantum voltage standards in the National Institute of Metrology (NIM) of China. The device consists of four junction arrays, each of which has 1200 3-stacked Nb/Nb x Si1−x /Nb junctions and an on-chip superconducting microwave circuit which is mainly a power divider enabling each Josephson array being loaded with an equal amount of microwave power. A direct current (dc) quantum voltage of about 0.5 V with a ∼1-mA current margin of the 1st quantum voltage step is obtained. To further prove the quality of NIM device, a comparison between the NIM device with the National Institute of Standards and Technology (NIST) programmable Josephson voltage standard (PJVS) system device is conducted. The difference of the reproduced 0.5-V quantum voltage between the two devices is about 0.55 nV, which indicates good agreement between the two devices. With the homemade device, we have realized a precise and applicable 0.5-V applicable-level quantum voltage.
Using NbN∕TiNx∕NbN∕TiNx∕NbN double-junction stack technology we have demonstrated a programmable Josephson voltage standard chip that operates up to 10.16V output voltage cooled with a two-stage Gifford–McMahon cryocooler. The circuit uses double-junction stacks, where two junctions are fabricated in each stack, in order to integrate 327 680 junctions into a 15.3mm×15.3mm chip. A 1-to-32 microwave distribution circuit is also integrated on the chip. The chip is divided into 22 cells, which perform as an 11-bit digital-to-analog converter. The 21 working cells include 307 200 junctions biased with 16GHz microwaves at 10.2K that generated flat voltage steps with current margins greater than 1mA, which indicates good uniformity of the stacked junctions.
Programmable Josephson voltage standard (PJVS) circuits were developed that operate at 16 GHz to 20 GHz with operating margins larger than 1 mA. Two circuit designs were demonstrated, each having a total of ~ 300,000 junctions, which were divided into either 16 or 32 sub-arrays. Triple-stacked junctions were used in order to fit the ~300,000 junctions on each circuit. The amorphous NbxSi1-x-barrier junction technology provided a high degree of uniformity of the barrier and junction electrical properties, which was necessary to achieve the 1 mA operating margin. Although the margins on both the 16-array and 32-array circuits were much greater than 1 mA, the circuit yield for the 16-array design was lower because the longer arrays are more sensitive to defects. The use of lumped-element microwave splitters and tapered arrays significantly reduced the microwave input power and increased the operating margins of these designs. In addition, the broadband microwave response of the designs allowed the PJVS output voltage to be continuously adjusted by using the microwave frequency while remaining on margins.
A programmable dc voltage standard for output voltages of up to 10 V has been realized. The series arrays, consisting of about 69120 overdamped superconductor/insulator/normal metal/insulator/superconductor (SINIS) Josephson junctions, have been fabricated using the reliable Nb-Al/Al/sub 2/O/sub 3/ technology. The arrays can be operated in conventional Josephson voltage standards at microwave frequencies from 70 GHz to 75 GHz. Steps of constant voltage are observed at very low microwave power levels, since the major part of the microwave power is generated by the junctions themselves. The operation of the arrays and the formation of Shapiro steps are discussed.
Series arrays of Nb–PdAu–Nb Josephson junctions were fabricated with characteristics ideally suited for application in programmable voltage standards and D/A converters with fundamental accuracy. Large arrays of junctions with applied microwave power showed constant voltage steps with current amplitudes as large as 7 mA. A novel coplanar waveguide design enabled uniform microwave power coupling to a five-segment array of 8192 junctions, so each segment had constant voltage steps over the same bias range. The 8192-junction device generated 1.1 mA steps at 186 mV with 11 GHz power and a maximum constant voltage step of 260 mV at 15.34 GHz.