Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Instrumentation and Measurement

10 V SINIS Josephson junction series arrays for programmable voltage standards

J. Kohlmann, H. Schulze, Ralf Behr, F. Muller, J. Niemeyer

Published Apr 1, 2001• 20 citations
Publisher

Abstract

A programmable dc voltage standard for output voltages of up to 10 V has been realized. The series arrays, consisting of about 69120 overdamped superconductor/insulator/normal metal/insulator/superconductor (SINIS) Josephson junctions, have been fabricated using the reliable Nb-Al/Al/sub 2/O/sub 3/ technology. The arrays can be operated in conventional Josephson voltage standards at microwave frequencies from 70 GHz to 75 GHz. Steps of constant voltage are observed at very low microwave power levels, since the major part of the microwave power is generated by the junctions themselves. The operation of the arrays and the formation of Shapiro steps are discussed.

DOI
10.1109/19.918099

Related papers

Microwave properties of large SINIS series arrays for Josephson voltage standards of intrinsic stability

J. Kohlmann, H. Schulze, Ralf Behr +3 more

Series arrays of several thousands of overdamped SINIS junctions have been fabricated for programmable voltage standards. The arrays can be operated with low microwave power, since the major part of the microwave power is generated by the junctions itself. The operation of the arrays and the formation of Shapiro steps is discussed.

Conference on Precision Electromagnetic Measurements•Nov 7, 2002•0 citations

Design and fabrication of 10 V SINIS Josephson arrays for programmable voltage standards

H. Schulze, Ralf Behr, J. Kohlmann +2 more

The fabrication and the chip layout of 69120 SINIS Josephson junction series arrays for a programmable 10 V Josephson dc voltage standard are presented. Under 70 GHz microwave irradiation, the current-voltage characteristic exhibits a non-hysteretic voltage step with a step width of 200 µA. The chip can be operated with the conventional SIS Josephson voltage standard systems.

Superconductor Science and Technology•Aug 2, 2000•67 citations

Josephson Series Arrays for Programmable 10-V SINIS Josephson Voltage Standards and for Josephson Arbitrary Waveform Synthesizers Based on SNS Junctions

J. Kohlmann, F. Muller, Oliver Kieler +4 more

Programmable Josephson voltage standards for output voltages up to 10 V have been realized. Binary-divided series arrays consisting of 69 632 overdamped SINIS Josephson junctions have been fabricated using reliable Nb-Al/Al2O3technology (S: superconductor, I: insulator, N: normal metal). Series arrays of about 1000 SNS Josephson junctions were realized as lumped arrays for applications in the Josephson arbitrary waveform synthesizer (JAWS). We suggest a novel scheme for combining the higher voltages generated by the binary-divided arrays with the frequency spectral characteristics of the JAWS, in order to optimize the frequency spectrum of the generated ac voltages

IEEE Transactions on Instrumentation and Measurement•Mar 16, 2007•32 citations

SINIS Josephson junctions for programmable Josephson voltage standard circuits

H. Schulze, F. Muller, Ralf Behr +3 more

Nonhysteretic Josephson junctions with a superconductor-insulator-normal metal-insulator-superconductor (SINIS) structure fabricated using the reliable Nb-AlO/sub x/ technology have been used for the design and fabrication of a 1-V inherently stable Josephson voltage standard. The superconducting circuit can be driven at the same microwave frequencies as conventional SIS circuits. The microwave-induced 1-V step is suitable for calibration purposes. The successful operation of the 1-V circuit is due to an internal, phase-locked oscillation of all SINIS junctions which are embedded in a low-impedance strip-line. The microwave power required for exciting the coherent oscillation is very low and allows the integration of low power sources. Even operation without any external microwave source appears to be possible.

IEEE Transactions on Applied Superconductivity•Jun 1, 1999•51 citations

1 V programmable voltage standards based on SNIS Josephson junction series arrays

V. Lacquaniti, Natascia De Leo, Matteo Fretto +3 more

Binary-divided 1 V arrays were fabricated for programmable Josephson voltage standards in close cooperation between INRIM and PTB. The arrays, consisting of 8192 overdamped Nb/Al-AlO(x)Nb SNIS Josephson junctions, were successfully operated at microwave frequencies around 70 GHz. While the characteristic voltage of the junctions ranged from 0.25 to 0.6 mV, the current margins were larger than 1 mA for the Shapiro step n = 1. In addition, flat Shapiro steps of higher order (n = 3 and 4) were generated at increased microwave power levels due to the large characteristic voltage, demonstrating the small parameter spread of the SNIS junctions. Operation at temperatures up to 6-7 K has also been verified, measuring quantized voltages up to 1.25 V on the n = 1 step.

Superconductor Science and Technology•Jan 27, 2011•37 citations

Superconductor-normal-superconductor junctions for programmable voltage standards

S. P. Benz

Series arrays of Nb–PdAu–Nb Josephson junctions were fabricated with characteristics ideally suited for application in programmable voltage standards and D/A converters with fundamental accuracy. Large arrays of junctions with applied microwave power showed constant voltage steps with current amplitudes as large as 7 mA. A novel coplanar waveguide design enabled uniform microwave power coupling to a five-segment array of 8192 junctions, so each segment had constant voltage steps over the same bias range. The 8192-junction device generated 1.1 mA steps at 186 mV with 11 GHz power and a maximum constant voltage step of 260 mV at 15.34 GHz.

Applied Physics Letters•Oct 30, 1995•133 citations
A programmable dc voltage standard for output voltages of up to 10 V has been realized. The series arrays, consisting of about 69120 overdamped superconductor/insulator/normal metal/insulator/superconductor (SINIS) Josephson junctions, have been fabricated using the reliable Nb-Al/Al/sub 2/O/sub 3/ technology. The arrays can be operated in conventional Josephson voltage standards at microwave frequencies from 70 GHz to 75 GHz. Steps of constant voltage are observed at very low microwave power levels, since the major part of the microwave power is generated by the junctions themselves. The operation of the arrays and the formation of Shapiro steps are discussed.
Programmable Josephson voltage standards for output voltages up to 10 V have been realized. Binary-divided series arrays consisting of 69 632 overdamped SINIS Josephson junctions have been fabricated using reliable Nb-Al/Al2O3technology (S: superconductor, I: insulator, N: normal metal). Series arrays of about 1000 SNS Josephson junctions were realized as lumped arrays for applications in the Josephson arbitrary waveform synthesizer (JAWS). We suggest a novel scheme for combining the higher voltages generated by the binary-divided arrays with the frequency spectral characteristics of the JAWS, in order to optimize the frequency spectrum of the generated ac voltages
Nonhysteretic Josephson junctions with a superconductor-insulator-normal metal-insulator-superconductor (SINIS) structure fabricated using the reliable Nb-AlO/sub x/ technology have been used for the design and fabrication of a 1-V inherently stable Josephson voltage standard. The superconducting circuit can be driven at the same microwave frequencies as conventional SIS circuits. The microwave-induced 1-V step is suitable for calibration purposes. The successful operation of the 1-V circuit is due to an internal, phase-locked oscillation of all SINIS junctions which are embedded in a low-impedance strip-line. The microwave power required for exciting the coherent oscillation is very low and allows the integration of low power sources. Even operation without any external microwave source appears to be possible.
Binary-divided 1 V arrays were fabricated for programmable Josephson voltage standards in close cooperation between INRIM and PTB. The arrays, consisting of 8192 overdamped Nb/Al-AlO(x)Nb SNIS Josephson junctions, were successfully operated at microwave frequencies around 70 GHz. While the characteristic voltage of the junctions ranged from 0.25 to 0.6 mV, the current margins were larger than 1 mA for the Shapiro step n = 1. In addition, flat Shapiro steps of higher order (n = 3 and 4) were generated at increased microwave power levels due to the large characteristic voltage, demonstrating the small parameter spread of the SNIS junctions. Operation at temperatures up to 6-7 K has also been verified, measuring quantized voltages up to 1.25 V on the n = 1 step.
Series arrays of Nb–PdAu–Nb Josephson junctions were fabricated with characteristics ideally suited for application in programmable voltage standards and D/A converters with fundamental accuracy. Large arrays of junctions with applied microwave power showed constant voltage steps with current amplitudes as large as 7 mA. A novel coplanar waveguide design enabled uniform microwave power coupling to a five-segment array of 8192 junctions, so each segment had constant voltage steps over the same bias range. The 8192-junction device generated 1.1 mA steps at 186 mV with 11 GHz power and a maximum constant voltage step of 260 mV at 15.34 GHz.