Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Superconductor Science and Technology

1 V programmable voltage standards based on SNIS Josephson junction series arrays

V. Lacquaniti, Natascia De Leo, Matteo Fretto, A. Sosso, F Müller, J. Kohlmann

Published Jan 27, 2011• 37 citations
Publisher

Abstract

Binary-divided 1 V arrays were fabricated for programmable Josephson voltage standards in close cooperation between INRIM and PTB. The arrays, consisting of 8192 overdamped Nb/Al-AlO(x)Nb SNIS Josephson junctions, were successfully operated at microwave frequencies around 70 GHz. While the characteristic voltage of the junctions ranged from 0.25 to 0.6 mV, the current margins were larger than 1 mA for the Shapiro step n = 1. In addition, flat Shapiro steps of higher order (n = 3 and 4) were generated at increased microwave power levels due to the large characteristic voltage, demonstrating the small parameter spread of the SNIS junctions. Operation at temperatures up to 6-7 K has also been verified, measuring quantized voltages up to 1.25 V on the n = 1 step.

DOI
10.1088/0953-2048/24/4/045004

Related papers

Binary-divided arrays with intrisically overdamped Nb/Al-AlOx/Nb (SNIS) junctions driven at 70 GHz

V. Lacquaniti, Natascia De Leo, Matteo Fretto +3 more

Binary-divided IV arrays with 8192 overdamped Nb/Al-AlOx/Nb Josephson junctions, fabricated within a joint cooperation between INRIM and PTB, have been tested at 4.2 K and in a temperature range from 6 to 7 K. We measured the microwave-induced step amplitude and checked the uniformity of junction parameters and microwave response on the whole array and sub-segments. The characteristic voltage Vc of the fabricated junctions varies from 0.25 to 0.6 mV. For the lower limit of Vc we could demonstrate at 4.2 K proper operation of the 1 V circuits with current margins larger than 1 mA for all array segments. In the case of larger values for Vc the arrays can be operated at the second and third Shapiro step, when radiated with microwaves from 69 to 74 GHz. Unsloped 3rd harmonic steps whose width ranged from 0.3 mA up to and above 1 mA have been measured on all subsegments providing voltages up to 3.73 V at 73.7 GHz across the whole array. Devices with high values of Vc (at 4.2 K) have been also successfully operated at 6-7 K, by optimizing the first Shapiro step. Quantized voltages up to 1.24 V with current margins between 0.5 and 0.8 mA have been observed.

•Jun 1, 2010•0 citations

10 V SINIS Josephson junction series arrays for programmable voltage standards

J. Kohlmann, H. Schulze, Ralf Behr +2 more

A programmable dc voltage standard for output voltages of up to 10 V has been realized. The series arrays, consisting of about 69120 overdamped superconductor/insulator/normal metal/insulator/superconductor (SINIS) Josephson junctions, have been fabricated using the reliable Nb-Al/Al/sub 2/O/sub 3/ technology. The arrays can be operated in conventional Josephson voltage standards at microwave frequencies from 70 GHz to 75 GHz. Steps of constant voltage are observed at very low microwave power levels, since the major part of the microwave power is generated by the junctions themselves. The operation of the arrays and the formation of Shapiro steps are discussed.

IEEE Transactions on Instrumentation and Measurement•Apr 1, 2001•20 citations

Superconductor-normal-superconductor junctions for programmable voltage standards

S. P. Benz

Series arrays of Nb–PdAu–Nb Josephson junctions were fabricated with characteristics ideally suited for application in programmable voltage standards and D/A converters with fundamental accuracy. Large arrays of junctions with applied microwave power showed constant voltage steps with current amplitudes as large as 7 mA. A novel coplanar waveguide design enabled uniform microwave power coupling to a five-segment array of 8192 junctions, so each segment had constant voltage steps over the same bias range. The 8192-junction device generated 1.1 mA steps at 186 mV with 11 GHz power and a maximum constant voltage step of 260 mV at 15.34 GHz.

Applied Physics Letters•Oct 30, 1995•133 citations

Series arrays of NbSi barrier Josephson junctions for AC voltage standards

J. Kohlmann, Oliver Kieler, Thomas Scheller +3 more

AC Josephson voltage standards are typically based on series arrays of overdamped Josephson junctions, which are presently realized using an NbxSi1-xbarrier at PTB. The characteristic parameters of these SNS-like junctions can be tuned by the Nb content and the thickness of the barrier over a wide range for operation from 10 GHz to 70 GHz. Based on these junctions, we developed binary-divided 10 V arrays as well as pulse-driven arrays for 1 V output voltages.

Conference on Precision Electromagnetic Measurements•Jul 1, 2016•2 citations

Josephson Series Arrays for Programmable 10-V SINIS Josephson Voltage Standards and for Josephson Arbitrary Waveform Synthesizers Based on SNS Junctions

J. Kohlmann, F. Muller, Oliver Kieler +4 more

Programmable Josephson voltage standards for output voltages up to 10 V have been realized. Binary-divided series arrays consisting of 69 632 overdamped SINIS Josephson junctions have been fabricated using reliable Nb-Al/Al2O3technology (S: superconductor, I: insulator, N: normal metal). Series arrays of about 1000 SNS Josephson junctions were realized as lumped arrays for applications in the Josephson arbitrary waveform synthesizer (JAWS). We suggest a novel scheme for combining the higher voltages generated by the binary-divided arrays with the frequency spectral characteristics of the JAWS, in order to optimize the frequency spectrum of the generated ac voltages

IEEE Transactions on Instrumentation and Measurement•Mar 16, 2007•32 citations

Microwave properties of large SINIS series arrays for Josephson voltage standards of intrinsic stability

J. Kohlmann, H. Schulze, Ralf Behr +3 more

Series arrays of several thousands of overdamped SINIS junctions have been fabricated for programmable voltage standards. The arrays can be operated with low microwave power, since the major part of the microwave power is generated by the junctions itself. The operation of the arrays and the formation of Shapiro steps is discussed.

Conference on Precision Electromagnetic Measurements•Nov 7, 2002•0 citations
Binary-divided 1 V arrays were fabricated for programmable Josephson voltage standards in close cooperation between INRIM and PTB. The arrays, consisting of 8192 overdamped Nb/Al-AlO(x)Nb SNIS Josephson junctions, were successfully operated at microwave frequencies around 70 GHz. While the characteristic voltage of the junctions ranged from 0.25 to 0.6 mV, the current margins were larger than 1 mA for the Shapiro step n = 1. In addition, flat Shapiro steps of higher order (n = 3 and 4) were generated at increased microwave power levels due to the large characteristic voltage, demonstrating the small parameter spread of the SNIS junctions. Operation at temperatures up to 6-7 K has also been verified, measuring quantized voltages up to 1.25 V on the n = 1 step.
Binary-divided IV arrays with 8192 overdamped Nb/Al-AlOx/Nb Josephson junctions, fabricated within a joint cooperation between INRIM and PTB, have been tested at 4.2 K and in a temperature range from 6 to 7 K. We measured the microwave-induced step amplitude and checked the uniformity of junction parameters and microwave response on the whole array and sub-segments. The characteristic voltage Vc of the fabricated junctions varies from 0.25 to 0.6 mV. For the lower limit of Vc we could demonstrate at 4.2 K proper operation of the 1 V circuits with current margins larger than 1 mA for all array segments. In the case of larger values for Vc the arrays can be operated at the second and third Shapiro step, when radiated with microwaves from 69 to 74 GHz. Unsloped 3rd harmonic steps whose width ranged from 0.3 mA up to and above 1 mA have been measured on all subsegments providing voltages up to 3.73 V at 73.7 GHz across the whole array. Devices with high values of Vc (at 4.2 K) have been also successfully operated at 6-7 K, by optimizing the first Shapiro step. Quantized voltages up to 1.24 V with current margins between 0.5 and 0.8 mA have been observed.
A programmable dc voltage standard for output voltages of up to 10 V has been realized. The series arrays, consisting of about 69120 overdamped superconductor/insulator/normal metal/insulator/superconductor (SINIS) Josephson junctions, have been fabricated using the reliable Nb-Al/Al/sub 2/O/sub 3/ technology. The arrays can be operated in conventional Josephson voltage standards at microwave frequencies from 70 GHz to 75 GHz. Steps of constant voltage are observed at very low microwave power levels, since the major part of the microwave power is generated by the junctions themselves. The operation of the arrays and the formation of Shapiro steps are discussed.
Series arrays of Nb–PdAu–Nb Josephson junctions were fabricated with characteristics ideally suited for application in programmable voltage standards and D/A converters with fundamental accuracy. Large arrays of junctions with applied microwave power showed constant voltage steps with current amplitudes as large as 7 mA. A novel coplanar waveguide design enabled uniform microwave power coupling to a five-segment array of 8192 junctions, so each segment had constant voltage steps over the same bias range. The 8192-junction device generated 1.1 mA steps at 186 mV with 11 GHz power and a maximum constant voltage step of 260 mV at 15.34 GHz.
Programmable Josephson voltage standards for output voltages up to 10 V have been realized. Binary-divided series arrays consisting of 69 632 overdamped SINIS Josephson junctions have been fabricated using reliable Nb-Al/Al2O3technology (S: superconductor, I: insulator, N: normal metal). Series arrays of about 1000 SNS Josephson junctions were realized as lumped arrays for applications in the Josephson arbitrary waveform synthesizer (JAWS). We suggest a novel scheme for combining the higher voltages generated by the binary-divided arrays with the frequency spectral characteristics of the JAWS, in order to optimize the frequency spectrum of the generated ac voltages