Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Physics Conference Series

Braiding Operations for a Topological Josephson Junction Array using SFQ Current Pulses

Takuro Funazawa, Masato Naruse, Hiroaki Myoren

Published Aug 1, 2022• 1 citation
Publisher

Abstract

Abstract Majorana bound states (MBSs) can occur in topological Josephson junction (JJ) arrays with the presence of a fractional vortex with 2π-phase winding. It has been theoretically shown that the braiding operation can be achieved by using current pulses, compatible with single flux quantum (SFQ) technology. Therefore, we designed an SFQ logic circuit for the braiding operations of the topological JJ array using single flux quanta in a conventional JJ array. Braiding operations could be realized by an SFQ logic circuit with double flux quantum driver. To obtain positive and negative current pulses using the SFQ logic circuit, we used SFQ logic circuits with ac biasing for simulation. Finally, we confirmed the CNOT operation using an array-type SFQ circuit by means of simulation and estimated the CNOT operation speed.

DOI
10.1088/1742-6596/2323/1/012035

Related papers

Braiding Operations for a Topological Josephson Junction Array Using a Bipolar Current Pulse Generator Controlled by SFQ Logic Circuits

Hiroaki Myoren, Takuro Funazawa, Kitaru Oba +2 more

Majorana bound states can occur in a topological Josephson junction (JJ) array in the presence of a fractal vortex with 2$\pi$-phase winding. The braiding operation was theoretically demonstrated using current pulses, compatible with the single flux quantum (SFQ) technology. Herein, we designed an SFQ logic circuit for braiding operations of a topological JJ array using single flux quanta. Braiding operations could be realized using a bipolar current pulse generator controlled by an SFQ logic circuit.

IEEE Transactions on Applied Superconductivity•Mar 4, 2024•1 citation

Simulation of the Margins in Single Flux Quantum Circuits Containing π-Shifted Josephson Junctions

Yuki Yamanashi, Sotaro Nakaishi, Nobuyuki Yoshikawa

We designed several single flux quantum (SFQ) flip-flops and logic gates composed of Josephson junctions (JJs) and π-shifted JJs (π-JJs) to quantitatively evaluate effectiveness of introduction of π-JJs into the SFQ logic circuit. One-output flip-flops and logic gates were designed on the basis of the circuit design methodology we built for the SFQ circuit containing π-JJs. The designed flip-flops and logic gates have wide operating margins, the dc-bias margins of larger than ±30%, and device parameter margins of ±18%, though the static power consumption are reduced compared to conventional ones composed of JJs. We found that the difference in the critical current density between JJs and π-JJs does not affect the operating margins of the SFQ flip-flop composed of JJs and π-JJs. We devised a circuit structure of the delay flip-flop with complementary outputs composed of JJs and π-JJs (π-DFFC). The analog circuit simulation shows the dc-bias margin of the π-DFFC is larger than ±33%. These results indicate that the large-scale SFQ logic circuit system can be implemented using the flip-flops and logic gates containing π-JJs.

IEEE Transactions on Applied Superconductivity•Mar 18, 2019•11 citations

Quantum flux type logic circuits utilizing Josephson junction transmission lines

Michitada Morisue, M. Satoh, Kenji Araki

A quantum-flux-type logic circuit is proposed which is composed of Josephson junction transmission lines, along which localized magnetic flux can propagate. By choosing bias current properly, the duplication of magnetic flux and a variety of logical functions can be obtained without changing the circuit topology. Computer simulation results are presented on AND and OR operations with two and three inputs for the same circuit topology, confirming that these circuits can be used as logic circuits. The simulations demonstrate the high-speed operation and low power consumption of this circuit.>

IEEE Transactions on Magnetics•Mar 1, 1989•1 citation

Current-injection Josephson latch employing a single-flux quantum. I

J. Sone, Toshishige Yamada

A new current-injection Josephson latch employing a single-flux quantum is proposed. It has a master-slave circuit configuration and operates under ac power supply. In the circuit, data are stored as a circulating current in a superconducting loop consisting of a single junction and inductances. A two-junction interferometer gate directly coupled to the loop reads out the stored data. Dual-rail signals are generated from the read-out data by Josephson junctions and resister-coupled Josephson logic gates. The isolation between a master circuit and a slave circuit is realized using high-impedance states in the Josephson junctions. The circuit design and computer-simulation results on the circuit operation are described in this paper.

Journal of Applied Physics•May 1, 1986•2 citations

Design methodology of single-flux-quantum flip-flops composed of both 0- and π-shifted Josephson junctions

Yuki Yamanashi, Sotaro Nakaishi, Akira Sugiyama +2 more

A methodology for designing single-flux-quantum (SFQ) flip-flops composed of both conventional (0-) and π -shifted Josephson junctions is investigated. We investigated the implementation of a storage loop, which can store flux quantum and is indispensable to express binary logic states in superconductor logic circuits. As all SFQ flip-flops have storage loops, the investigated design methodology can be applied to their design. We designed several SFQ flip-flops composed of 0- and π -shifted Josephson junctions using the investigated design methodology. The performances of the designed SFQ flip-flops were quantitatively evaluated by using an analog circuit simulator which we developed. We confirmed the correct operation of various SFQ flip-flops composed of 0- and π -shifted Josephson junctions with wide operating margins. Moreover, we observed that the investigated design methodology is suitable for SFQ flip-flops with complementary outputs because a storage loop composed of both 0- and π -shifted Josephson junctions has a symmetric structure and the complementary output function can be realized by using the storage loop. Our investigation indicates that the number of Josephson junctions and static power consumption of a non-destructive read-out flip-flop with complementary outputs (NDROC) can be reduced to less than half of those of the conventional NDROC, which has two storage loops composed of 0-Josephson junctions, to realize the complementary output function. The investigated design methodology is expected to be applied to not only SFQ circuits but also other superconducting logic circuits and novel reconfigurable logic devices using programmable 0- π Josephson junctions.

Superconductor Science and Technology•Aug 2, 2018•37 citations

Superconductor Logic Implementation With All-JJ Inductor-Free Cell Library

Haolin Cong, Sasan Razmkhah, Mustafa Altay Karamuftuoglu +1 more

Single flux quantum (SFQ) technology has garnered significant attention due to its low switching power and high operational speed. Researchers have been actively pursuing more advanced devices and technologies to further reduce the reliance on inductors, bias, and dynamic power. Recently, innovative magnetic Josephson junction devices have emerged, enhancing the field of superconductor electronics logic. This article introduces a novel cell library design that relies entirely on Josephson junctions, showing promising potential for eliminating the need for inductors in conventional SFQ cells. This results in a 55% reduction in cell size and an 80% decrease in both static and dynamic power consumption. The proposed library implements a half flux quantum logic, where each pulse duration is half that of a SFQ pulse. This article presents the schematics of the basic cells, emphasizing critical circuit parameters and their margins. In addition, it examines layout blueprints, showcasing the advantageous area-saving characteristics of the proposed design.

arXiv:2310.13857•IEEE Transactions on Applied Superconductivity•Jul 19, 2024•9 citations
Abstract Majorana bound states (MBSs) can occur in topological Josephson junction (JJ) arrays with the presence of a fractional vortex with 2π-phase winding. It has been theoretically shown that the braiding operation can be achieved by using current pulses, compatible with single flux quantum (SFQ) technology. Therefore, we designed an SFQ logic circuit for the braiding operations of the topological JJ array using single flux quanta in a conventional JJ array. Braiding operations could be realized by an SFQ logic circuit with double flux quantum driver. To obtain positive and negative current pulses using the SFQ logic circuit, we used SFQ logic circuits with ac biasing for simulation. Finally, we confirmed the CNOT operation using an array-type SFQ circuit by means of simulation and estimated the CNOT operation speed.
Majorana bound states can occur in a topological Josephson junction (JJ) array in the presence of a fractal vortex with 2π\piπ-phase winding. The braiding operation was theoretically demonstrated using current pulses, compatible with the single flux quantum (SFQ) technology. Herein, we designed an SFQ logic circuit for braiding operations of a topological JJ array using single flux quanta. Braiding operations could be realized using a bipolar current pulse generator controlled by an SFQ logic circuit.
We designed several single flux quantum (SFQ) flip-flops and logic gates composed of Josephson junctions (JJs) and π-shifted JJs (π-JJs) to quantitatively evaluate effectiveness of introduction of π-JJs into the SFQ logic circuit. One-output flip-flops and logic gates were designed on the basis of the circuit design methodology we built for the SFQ circuit containing π-JJs. The designed flip-flops and logic gates have wide operating margins, the dc-bias margins of larger than ±30%, and device parameter margins of ±18%, though the static power consumption are reduced compared to conventional ones composed of JJs. We found that the difference in the critical current density between JJs and π-JJs does not affect the operating margins of the SFQ flip-flop composed of JJs and π-JJs. We devised a circuit structure of the delay flip-flop with complementary outputs composed of JJs and π-JJs (π-DFFC). The analog circuit simulation shows the dc-bias margin of the π-DFFC is larger than ±33%. These results indicate that the large-scale SFQ logic circuit system can be implemented using the flip-flops and logic gates containing π-JJs.
A quantum-flux-type logic circuit is proposed which is composed of Josephson junction transmission lines, along which localized magnetic flux can propagate. By choosing bias current properly, the duplication of magnetic flux and a variety of logical functions can be obtained without changing the circuit topology. Computer simulation results are presented on AND and OR operations with two and three inputs for the same circuit topology, confirming that these circuits can be used as logic circuits. The simulations demonstrate the high-speed operation and low power consumption of this circuit.>
A new current-injection Josephson latch employing a single-flux quantum is proposed. It has a master-slave circuit configuration and operates under ac power supply. In the circuit, data are stored as a circulating current in a superconducting loop consisting of a single junction and inductances. A two-junction interferometer gate directly coupled to the loop reads out the stored data. Dual-rail signals are generated from the read-out data by Josephson junctions and resister-coupled Josephson logic gates. The isolation between a master circuit and a slave circuit is realized using high-impedance states in the Josephson junctions. The circuit design and computer-simulation results on the circuit operation are described in this paper.
A methodology for designing single-flux-quantum (SFQ) flip-flops composed of both conventional (0-) and π -shifted Josephson junctions is investigated. We investigated the implementation of a storage loop, which can store flux quantum and is indispensable to express binary logic states in superconductor logic circuits. As all SFQ flip-flops have storage loops, the investigated design methodology can be applied to their design. We designed several SFQ flip-flops composed of 0- and π -shifted Josephson junctions using the investigated design methodology. The performances of the designed SFQ flip-flops were quantitatively evaluated by using an analog circuit simulator which we developed. We confirmed the correct operation of various SFQ flip-flops composed of 0- and π -shifted Josephson junctions with wide operating margins. Moreover, we observed that the investigated design methodology is suitable for SFQ flip-flops with complementary outputs because a storage loop composed of both 0- and π -shifted Josephson junctions has a symmetric structure and the complementary output function can be realized by using the storage loop. Our investigation indicates that the number of Josephson junctions and static power consumption of a non-destructive read-out flip-flop with complementary outputs (NDROC) can be reduced to less than half of those of the conventional NDROC, which has two storage loops composed of 0-Josephson junctions, to realize the complementary output function. The investigated design methodology is expected to be applied to not only SFQ circuits but also other superconducting logic circuits and novel reconfigurable logic devices using programmable 0- π Josephson junctions.
Single flux quantum (SFQ) technology has garnered significant attention due to its low switching power and high operational speed. Researchers have been actively pursuing more advanced devices and technologies to further reduce the reliance on inductors, bias, and dynamic power. Recently, innovative magnetic Josephson junction devices have emerged, enhancing the field of superconductor electronics logic. This article introduces a novel cell library design that relies entirely on Josephson junctions, showing promising potential for eliminating the need for inductors in conventional SFQ cells. This results in a 55% reduction in cell size and an 80% decrease in both static and dynamic power consumption. The proposed library implements a half flux quantum logic, where each pulse duration is half that of a SFQ pulse. This article presents the schematics of the basic cells, emphasizing critical circuit parameters and their margins. In addition, it examines layout blueprints, showcasing the advantageous area-saving characteristics of the proposed design.