Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Design and Demonstration of Directly Coupled Quantum-Flux-Parametron Circuits With Optimized Parameters

Ryohei Ishida, Naoki Takeuchi, Taiki Yamae, Nobuyuki Yoshikawa

Published Feb 18, 2021• 7 citations
Publisher

Abstract

We have been developing the adiabatic quantum-flux-parametron (AQFP), which is an ultra-low-power superconductor logic family. To date, somewhat large AQFP circuits, such as a 4-bit microprocessor and an 8-bit adder, have been demonstrated. To design much larger devices, space-efficient logic circuits are needed. Therefore, in a previous study, we proposed the directly coupled quantum-flux-parametron (DQFP). DQFP circuits propagate data via a direct connection, whereas AQFP circuits propagate data via transformers, which can occupy a large part of the gate area. Thus, DQFP circuits are more space-efficient than AQFP circuits. In this study, we optimized the circuit parameters for DQFP logic cells using numerical simulations from the viewpoint of excitation current margins, component parameter margins, and energy dissipation. We also designed the physical layout of the optimized DQFP cells, fabricated chips, and demonstrated basic DQFP circuits with the optimized cells.

DOI
10.1109/tasc.2021.3059723

Related papers

Simulation and Experimental Demonstration of Logic Circuits Using an Ultra-Low-Power Adiabatic Quantum-Flux-Parametron

Koji Inoue, Naoki Takeuchi, Kei Ehara +2 more

We have been investigating an ultra-low-power adiabatic quantum-flux-parametron (AQFP) logic, the energy dissipation of which can be decreased by changing its potential energy slowly or adiabatically. In the present study, we designed basic AQFP logic gates and an AQFP 1-bit full adder, and examined their operations through simulations and experiments. The AQFP 1-bit full adder is composed of 46 Josephson junctions, which is approximately one-quarter the number of junctions of a full adder using conventional rapid single-flux-quantum logic. The measurement results indicated that the AQFP 1-bit full adder has a wide current bias margin of as large as ±27.8%.

IEEE Transactions on Applied Superconductivity•Dec 24, 2012•39 citations

Design and demonstration of adiabatic quantum-flux-parametron logic circuits with superconductor magnetic shields

Kenta Inoue, Naoki Takeuchi, Tatsuya Narama +2 more

Abstract Adiabatic quantum-flux-parametron (AQFP) logic is an energy-efficient superconductor logic with zero static power and very small dynamic power due to adiabatic switching operations. In order to build large-scale digital circuits, we built AQFP logic cells using superconductor magnetic shields, which are necessary in order to avoid unwanted magnetic couplings between the cells and excitation currents. In preliminary experimental tests, we confirmed that the unwanted coupling became negligibly small thanks to the superconductor shields. As a demonstration, we designed a four-to-one multiplexor and a 16-junction full adder using the shielded logic cells. In both circuits, we confirmed correct logic operations with wide operation margins of excitation currents. These results indicate that large-scale AQFP digital circuits can be realized using the shielded logic cells.

Superconductor Science and Technology•Mar 13, 2015•11 citations

Directly coupled adiabatic superconductor logic

Naoki Takeuchi, Kota Arai, Nobuyuki Yoshikawa

Abstract Adiabatic superconductor logic (ASL) families are energy-efficient because they can operate with a switching energy much less than the I cΦ0 product, where I c is the critical current for Josephson junctions, Φ0 is the flux quantum, and I cΦ0 is generally on the order of 10–19 J. A switching energy of 0.03I cΦ0 has been demonstrated by adiabatic quantum-flux-parametron (AQFP) logic, which indicates the possibility of extremely energy-efficient digital circuits using ASL. ASL uses signal transformers to propagate and invert the signal current; otherwise, it is difficult to design inverters. However, signal transformers are generally difficult to miniaturize. Therefore, to realize high-density and energy-efficient superconductor circuits, ASL that does not use signal transformers is required. In this paper, we propose ASL without signal transformers, which we call directly coupled quantum-flux-parametron (DQFP). DQFP logic is based on AQFP, but it can invert signal current without using signal transformers. We conducted numerical simulation of a DQFP inverter chain to show that DQFP logic can invert signal current without signal transformers, and that DQFP logic can operate adiabatically. Then, we designed and fabricated basic DQFP circuits, such as an inverter chain and a full adder. All the circuits were found to have wide operating margins. Our results indicate that DQFP logic is suitable for high-density and energy-efficient superconductor circuits.

Superconductor Science and Technology•Apr 8, 2020•12 citations

SFQ/DQFP Interface Circuits

Tahereh Jabbari, Eby G. Friedman

The increasing complexity of hybrid superconductive computing systems has made interface circuits between logic families an issue of growing importance. In this paper, interface circuits between single flux quantum (SFQ) and directly coupled quantum flux parametron (DQFP) logic families to achieve high speed, low power hybrid superconductive computing systems are presented. In the proposed DQFP-to-SFQ interface, margins greater than$\pm$20% for the critical current of the JJs, bias currents, and inductances are exhibited. The margins of the excitation current of the DQFP buffer are$-$38% and +35% with the frequency of the excitation current in the range of 2 GHz to 10 GHz. In the proposed SFQ-to-DQFP interface, the margins are greater than$-$33% and +25%. The margins of the excitation current of the DQFP buffer are$-$50% and +20% for frequencies ranging from 2 GHz to 10 GHz. Since no transformers are required, the physical area of the adiabatic portion of the interface circuits is significantly less than existing interface circuits. The SFQ-to-DQFP interface circuit operates at frequencies approaching 20 GHz. These interface circuits therefore exhibit high parameter margins and operating frequencies while requiring significantly less area as compared to existing interface circuits. The proposed interface circuits support the use of both ultra-low power and high speed logic families in complex hybrid superconductive systems.

IEEE Transactions on Applied Superconductivity•Apr 5, 2023•4 citations

A compact AQFP logic cell design using an 8-metal layer superconductor process

Yuxing He, Christopher Lawrence Ayala, Naoki Takeuchi +7 more

Abstract Adiabatic quantum-flux-parametron (AQFP) is an adiabatic logic based on the quantum-flux-parametron. It has extremely low switching energy, as well as high signal gain and high robustness. In this work, we present the development of an AQFP cell library using the MIT LL 100 μ A μ m −2 superconductor electronics fabrication process, SFQ5ee. Four types of basic sub-cells, i.e. buffer, inverter, constant, and branch, are designed as the building blocks for combinational AQFP logic cells. Taking advantage of the 8 metal layers, we place the dc superconducting quantum interference device (SQUID) part of a buffer above the ground plane and the signal transformer part below the ground plane to mitigate unwanted couplings. In addition, by vertically overlapping the signal transformer and the dc SQUID, the dimension of a buffer is reduced to 15 μ m × 20 μ m, which is only 30% of that of the conventional design. More complex AQFP logic cells, such as the majority gate, AND gate, and OR gate, are designed by arraying the sub-cells together. Correct operations and wide excitation current margins are confirmed for the established AQFP logic cells by both simulation and experiments.

Superconductor Science and Technology•Jan 24, 2020•25 citations

Demonstration of 10k Gate-Scale Adiabatic-Quantum-Flux-Parametron Circuits

Tatsuya Narama, Yuki Yamanashi, Naoki Takeuchi +2 more

Adiabatic quantum flux parametron (AQFP) is a very energy-efficient superconductor logic. In AQFP logic, dynamic energy dissipation can be drastically reduced due to adiabatic switching operations using ac excitation currents. In the present study, we evaluated circuit yields using a large-scale AQFP circuit composed of as many as 10,000 AQFP gates with approximately 20,000 Josephson junctions. We measured eleven chips from four wafers and obtained circuit yields of 48% for 1,000-gate circuits and 22% for 10,000-gate circuits, respectively. In all the circuits, which worked correctly, the margins of excitation currents were as wide as approximately ±20%.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2015•13 citations
We have been developing the adiabatic quantum-flux-parametron (AQFP), which is an ultra-low-power superconductor logic family. To date, somewhat large AQFP circuits, such as a 4-bit microprocessor and an 8-bit adder, have been demonstrated. To design much larger devices, space-efficient logic circuits are needed. Therefore, in a previous study, we proposed the directly coupled quantum-flux-parametron (DQFP). DQFP circuits propagate data via a direct connection, whereas AQFP circuits propagate data via transformers, which can occupy a large part of the gate area. Thus, DQFP circuits are more space-efficient than AQFP circuits. In this study, we optimized the circuit parameters for DQFP logic cells using numerical simulations from the viewpoint of excitation current margins, component parameter margins, and energy dissipation. We also designed the physical layout of the optimized DQFP cells, fabricated chips, and demonstrated basic DQFP circuits with the optimized cells.
We have been investigating an ultra-low-power adiabatic quantum-flux-parametron (AQFP) logic, the energy dissipation of which can be decreased by changing its potential energy slowly or adiabatically. In the present study, we designed basic AQFP logic gates and an AQFP 1-bit full adder, and examined their operations through simulations and experiments. The AQFP 1-bit full adder is composed of 46 Josephson junctions, which is approximately one-quarter the number of junctions of a full adder using conventional rapid single-flux-quantum logic. The measurement results indicated that the AQFP 1-bit full adder has a wide current bias margin of as large as ±27.8%.
Abstract Adiabatic quantum-flux-parametron (AQFP) logic is an energy-efficient superconductor logic with zero static power and very small dynamic power due to adiabatic switching operations. In order to build large-scale digital circuits, we built AQFP logic cells using superconductor magnetic shields, which are necessary in order to avoid unwanted magnetic couplings between the cells and excitation currents. In preliminary experimental tests, we confirmed that the unwanted coupling became negligibly small thanks to the superconductor shields. As a demonstration, we designed a four-to-one multiplexor and a 16-junction full adder using the shielded logic cells. In both circuits, we confirmed correct logic operations with wide operation margins of excitation currents. These results indicate that large-scale AQFP digital circuits can be realized using the shielded logic cells.
Abstract Adiabatic superconductor logic (ASL) families are energy-efficient because they can operate with a switching energy much less than the I cΦ0 product, where I c is the critical current for Josephson junctions, Φ0 is the flux quantum, and I cΦ0 is generally on the order of 10–19 J. A switching energy of 0.03I cΦ0 has been demonstrated by adiabatic quantum-flux-parametron (AQFP) logic, which indicates the possibility of extremely energy-efficient digital circuits using ASL. ASL uses signal transformers to propagate and invert the signal current; otherwise, it is difficult to design inverters. However, signal transformers are generally difficult to miniaturize. Therefore, to realize high-density and energy-efficient superconductor circuits, ASL that does not use signal transformers is required. In this paper, we propose ASL without signal transformers, which we call directly coupled quantum-flux-parametron (DQFP). DQFP logic is based on AQFP, but it can invert signal current without using signal transformers. We conducted numerical simulation of a DQFP inverter chain to show that DQFP logic can invert signal current without signal transformers, and that DQFP logic can operate adiabatically. Then, we designed and fabricated basic DQFP circuits, such as an inverter chain and a full adder. All the circuits were found to have wide operating margins. Our results indicate that DQFP logic is suitable for high-density and energy-efficient superconductor circuits.
The increasing complexity of hybrid superconductive computing systems has made interface circuits between logic families an issue of growing importance. In this paper, interface circuits between single flux quantum (SFQ) and directly coupled quantum flux parametron (DQFP) logic families to achieve high speed, low power hybrid superconductive computing systems are presented. In the proposed DQFP-to-SFQ interface, margins greater than$\pm2020% for the critical current of the JJs, bias currents, and inductances are exhibited. The margins of the excitation current of the DQFP buffer are20-3838% and +35% with the frequency of the excitation current in the range of 2 GHz to 10 GHz. In the proposed SFQ-to-DQFP interface, the margins are greater than38-3333% and +25%. The margins of the excitation current of the DQFP buffer are33-$50% and +20% for frequencies ranging from 2 GHz to 10 GHz. Since no transformers are required, the physical area of the adiabatic portion of the interface circuits is significantly less than existing interface circuits. The SFQ-to-DQFP interface circuit operates at frequencies approaching 20 GHz. These interface circuits therefore exhibit high parameter margins and operating frequencies while requiring significantly less area as compared to existing interface circuits. The proposed interface circuits support the use of both ultra-low power and high speed logic families in complex hybrid superconductive systems.
Abstract Adiabatic quantum-flux-parametron (AQFP) is an adiabatic logic based on the quantum-flux-parametron. It has extremely low switching energy, as well as high signal gain and high robustness. In this work, we present the development of an AQFP cell library using the MIT LL 100 μ A μ m −2 superconductor electronics fabrication process, SFQ5ee. Four types of basic sub-cells, i.e. buffer, inverter, constant, and branch, are designed as the building blocks for combinational AQFP logic cells. Taking advantage of the 8 metal layers, we place the dc superconducting quantum interference device (SQUID) part of a buffer above the ground plane and the signal transformer part below the ground plane to mitigate unwanted couplings. In addition, by vertically overlapping the signal transformer and the dc SQUID, the dimension of a buffer is reduced to 15 μ m × 20 μ m, which is only 30% of that of the conventional design. More complex AQFP logic cells, such as the majority gate, AND gate, and OR gate, are designed by arraying the sub-cells together. Correct operations and wide excitation current margins are confirmed for the established AQFP logic cells by both simulation and experiments.
Adiabatic quantum flux parametron (AQFP) is a very energy-efficient superconductor logic. In AQFP logic, dynamic energy dissipation can be drastically reduced due to adiabatic switching operations using ac excitation currents. In the present study, we evaluated circuit yields using a large-scale AQFP circuit composed of as many as 10,000 AQFP gates with approximately 20,000 Josephson junctions. We measured eleven chips from four wafers and obtained circuit yields of 48% for 1,000-gate circuits and 22% for 10,000-gate circuits, respectively. In all the circuits, which worked correctly, the margins of excitation currents were as wide as approximately ±20%.