Abstract Adiabatic quantum-flux-parametron (AQFP) logic is an energy-efficient superconductor logic with zero static power and very small dynamic power due to adiabatic switching operations. In order to build large-scale digital circuits, we built AQFP logic cells using superconductor magnetic shields, which are necessary in order to avoid unwanted magnetic couplings between the cells and excitation currents. In preliminary experimental tests, we confirmed that the unwanted coupling became negligibly small thanks to the superconductor shields. As a demonstration, we designed a four-to-one multiplexor and a 16-junction full adder using the shielded logic cells. In both circuits, we confirmed correct logic operations with wide operation margins of excitation currents. These results indicate that large-scale AQFP digital circuits can be realized using the shielded logic cells.
Abstract Adiabatic quantum-flux-parametron (AQFP) logic is an energy-efficient superconductor logic with zero static power and very small dynamic power due to adiabatic switching operations. In order to build large-scale digital circuits, we built AQFP logic cells using superconductor magnetic shields, which are necessary in order to avoid unwanted magnetic couplings between the cells and excitation currents. In preliminary experimental tests, we confirmed that the unwanted coupling became negligibly small thanks to the superconductor shields. As a demonstration, we designed a four-to-one multiplexor and a 16-junction full adder using the shielded logic cells. In both circuits, we confirmed correct logic operations with wide operation margins of excitation currents. These results indicate that large-scale AQFP digital circuits can be realized using the shielded logic cells.
Adiabatic quantum flux parametron (AQFP) is a very energy-efficient superconductor logic. In AQFP logic, dynamic energy dissipation can be drastically reduced due to adiabatic switching operations using ac excitation currents. In the present study, we evaluated circuit yields using a large-scale AQFP circuit composed of as many as 10,000 AQFP gates with approximately 20,000 Josephson junctions. We measured eleven chips from four wafers and obtained circuit yields of 48% for 1,000-gate circuits and 22% for 10,000-gate circuits, respectively. In all the circuits, which worked correctly, the margins of excitation currents were as wide as approximately ±20%.
Abstract Adiabatic quantum-flux-parametron (AQFP) is an adiabatic logic based on the quantum-flux-parametron. It has extremely low switching energy, as well as high signal gain and high robustness. In this work, we present the development of an AQFP cell library using the MIT LL 100 μ A μ m −2 superconductor electronics fabrication process, SFQ5ee. Four types of basic sub-cells, i.e. buffer, inverter, constant, and branch, are designed as the building blocks for combinational AQFP logic cells. Taking advantage of the 8 metal layers, we place the dc superconducting quantum interference device (SQUID) part of a buffer above the ground plane and the signal transformer part below the ground plane to mitigate unwanted couplings. In addition, by vertically overlapping the signal transformer and the dc SQUID, the dimension of a buffer is reduced to 15 μ m × 20 μ m, which is only 30% of that of the conventional design. More complex AQFP logic cells, such as the majority gate, AND gate, and OR gate, are designed by arraying the sub-cells together. Correct operations and wide excitation current margins are confirmed for the established AQFP logic cells by both simulation and experiments.
We have been investigating an ultra-low-power adiabatic quantum-flux-parametron (AQFP) logic, the energy dissipation of which can be decreased by changing its potential energy slowly or adiabatically. In the present study, we designed basic AQFP logic gates and an AQFP 1-bit full adder, and examined their operations through simulations and experiments. The AQFP 1-bit full adder is composed of 46 Josephson junctions, which is approximately one-quarter the number of junctions of a full adder using conventional rapid single-flux-quantum logic. The measurement results indicated that the AQFP 1-bit full adder has a wide current bias margin of as large as ±27.8%.
We have been developing the adiabatic quantum-flux-parametron (AQFP), which is an ultra-low-power superconductor logic family. To date, somewhat large AQFP circuits, such as a 4-bit microprocessor and an 8-bit adder, have been demonstrated. To design much larger devices, space-efficient logic circuits are needed. Therefore, in a previous study, we proposed the directly coupled quantum-flux-parametron (DQFP). DQFP circuits propagate data via a direct connection, whereas AQFP circuits propagate data via transformers, which can occupy a large part of the gate area. Thus, DQFP circuits are more space-efficient than AQFP circuits. In this study, we optimized the circuit parameters for DQFP logic cells using numerical simulations from the viewpoint of excitation current margins, component parameter margins, and energy dissipation. We also designed the physical layout of the optimized DQFP cells, fabricated chips, and demonstrated basic DQFP circuits with the optimized cells.
Abstract Adiabatic quantum flux parametron (AQFP) is energy-efficient superconducting logic that operates with zero static energy consumption and extremely small dynamic energy consumption thanks to the adiabatic switching of the logic gates. One drawback in AQFP logic circuits is the wire length and fan-out limitations because of the low driving ability of the logic gates, which results in a large circuit area and significant latency. In the present study, we propose AQFP boosters with high driving ability. Two types of AQFP boosters are proposed: one is composed of a parallel connection of AQFP buffers, and the other uses multistage buffers driven by one excitation clock. We evaluated the maximum wire length of the proposed boosters by circuit simulations, including thermal noises, and found that the maximum wire length is 3.9 mm for fan-out one and 1 mm for fan-out four. We implemented the boosters and demonstrated their correct operations at low-speed tests. We also demonstrated a 5-to-31 decoder using the proposed boosters. It was shown that the circuit area, latency, and energy consumption were improved by about 30% compared to the design without the boosters.
We report recent progress on adiabatic quantum-flux-parametron (AQFP) logic, which is an energy-efficient superconductor logic based on quantum flux parametron (QFP). The switching energy of an AQFP gate can be arbitrarily reduced via adiabatic switching, in which the shape of the potential energy gradually varies between single-well and double-well shapes as the result of using ac excitation magnetic fluxes. First, we show the operation principle of AQFP and explain adiabatic switching in light of potential energy shapes. We also show calculated switching energy and bit error rates to demonstrate that the switching energy of AQFP can be significantly reduced while keeping a low error rate. Then, we report recently developed AQFP subsystems, which include an 8-bit carry look-ahead adder, a register file, and a long-interconnect driver. Our demonstration reveals that AQFP technology is ready to be applied in microprocessor design.