Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEICE Transactions on Electronics

Majority Gate-Based Feedback Latches for Adiabatic Quantum Flux Parametron Logic

Naoki TSUJI, Naoki Takeuchi, Yuki Yamanashi, Thomas Ortlepp, Nobuyuki Yoshikawa

Published Jan 1, 2016• 12 citations
Publisher

Abstract

We have studied ultra-low-power superconductor circuits using adiabatic quantum flux parametron (AQFP) logic. Latches, which store logic data in logic circuits, are indispensable logic elements in the realization of AQFP computing systems. Among them, feedback latches, which hold data by using a feedback loop, have advantages in terms of their wide operation margins and high stability. Their drawbacks are their large junction counts and long latency. In this paper, we propose a majority gate-based feedback latch for AQFP logic with a reduced number of junctions. We designed and fabricated the proposed AQFP latches using a standard National Institute of Advanced Industrial Science and Technology (AIST) process. The measurement results showed that the feedback latches operate with wide operation margins that are comparable with circuit simulation results.

DOI
10.1587/transele.e99.c.710

Related papers

Magnetically coupled quantum-flux-latch with wide operation margins

Naoki Tsuji, Naoki Takeuchi, Tatsuya Narama +3 more

Abstract We have been developing adiabatic quantum-flux-parametron (AQFP) circuits as an ultra-low-power superconductor logic for energy-efficient computing. In a previous study, we proposed and demonstrated a quantum-flux-latch (QFL), which is a compact and compatible latch for AQFP logic. The QFL is composed of an AQFP buffer gate and a storage loop, which are directly connected to each other. However, the operation margins were not sufficiently wide due to a trade-off between the operation margins of the storage loop and that of the buffer gate. In this present study, we propose a magnetically coupled QFL (MC-QFL), where the storage loop and the buffer gate are physically separated and magnetically coupled to each other to eliminate the trade-off in the operation margins. The simulation results showed that the critical parameter margin of the MC-QFL is twice as large as that of the previously designed QFL. For comparison, we fabricated and demonstrated both the previously designed QFL and the newly designed MC-QFL. The measurement results showed that the MC-QFL has wider operation margins compared with the previously designed QFL.

Superconductor Science and Technology•Sep 29, 2015•4 citations

Feedback-enabled low-latency adiabatic quantum-flux-parametron logic using a mixed clocking scheme

Yuxing He, Zhiliang Lei, Changning Wei +5 more

Abstract Adiabatic quantum-flux-parametron (AQFP) logic stands as an energy-efficient superconductor logic family relying on ac excitations. Though a four-phase clocking scheme has been commonly applied to excite and clock AQFP circuits, the cost of multiple sources and long between-stage latency (a quarter clock cycle) remain unsatisfactory. These drawbacks are more severe for sequential logics, where feedback loops require both down-flow and reverse-flow AQFP gates, necessitating extra buffers and imposing a limit on operating depth at the same time. To overcome these restrictions, in this paper, we introduce a novel mixed clocking scheme for low-latency AQFP logic circuits allowing feedback loops. In particular, the down-flow part of the AQFP circuit is excited by an ac current through delay-lines, which can reduce the latency from input to output stages. Meanwhile, the reverse-flow part is clocked by 2 other ac currents with 90° phase difference to reduce the buffering gates. The proposed clocking scheme is first applied to a fundamental logic circuit, confirming correct functionality and low-latency operations for diverse feedback conditions. For experimental validation, we design and fabricate a 3-bit AQFP counter using the proposed clocking scheme based on an on-chip clock splitter. The circuit is examined at 4 GHz under 4.2 K temperature, where we obtain desired operations and wide excitation margins.

Superconductor Science and Technology•Dec 20, 2024•0 citations

Simulation and Experimental Demonstration of Logic Circuits Using an Ultra-Low-Power Adiabatic Quantum-Flux-Parametron

Koji Inoue, Naoki Takeuchi, Kei Ehara +2 more

We have been investigating an ultra-low-power adiabatic quantum-flux-parametron (AQFP) logic, the energy dissipation of which can be decreased by changing its potential energy slowly or adiabatically. In the present study, we designed basic AQFP logic gates and an AQFP 1-bit full adder, and examined their operations through simulations and experiments. The AQFP 1-bit full adder is composed of 46 Josephson junctions, which is approximately one-quarter the number of junctions of a full adder using conventional rapid single-flux-quantum logic. The measurement results indicated that the AQFP 1-bit full adder has a wide current bias margin of as large as ±27.8%.

IEEE Transactions on Applied Superconductivity•Dec 24, 2012•39 citations

High-Speed Experimental Demonstration of Adiabatic Quantum-Flux-Parametron Gates Using Quantum-Flux-Latches

Naoki Takeuchi, Thomas Ortlepp, Yuki Yamanashi +1 more

We experimentally demonstrated high-speed logic operations of adiabatic quantum-flux-parametron (AQFP) gates through the use of quantum-flux-latches (QFLs). In QFL-based high-speed test circuits (QHTCs), the output data of the circuits under test (CUTs), which are driven by high-speed excitation currents, are stored in QFLs and are slowly read out using low-speed excitation currents. We designed and fabricated three types of QHTCs using QFLs with different circuit parameters, where the CUTs were buffer gates and and gates. We confirmed the correct operation of buffer gates and and gates at 1 GHz. The obtained bias margins of the 1 GHz excitation currents were more than ±30% for each QHTC, which is wide enough for high-speed logic operations of AQFP gates.

IEEE Transactions on Applied Superconductivity•Apr 7, 2014•9 citations

Low-latency adiabatic superconductor logic using delay-line clocking

Naoki Takeuchi, Mai Nozoe, Yuxing He +1 more

Adiabatic quantum-flux-parametron (AQFP) logic is an energy-efficient superconductor logic family. The switching energy of an AQFP gate can be arbitrarily reduced via adiabatic switching. However, AQFP logic has somewhat long latency due to the multiphase clocking scheme, in which each logic operation requires a quarter clock cycle. The latency in AQFP logic should be improved in order to design complex digital circuits such as microprocessors. In the present paper, we propose a low-latency clocking scheme for AQFP logic, which we call delay-line clocking. In delay-line clocking, the latency for each logic operation is determined by the propagation delay of the excitation current, which can be much shorter than a quarter clock cycle. Our numerical simulation shows that AQFP gates can operate with a latency of only a few picoseconds. We fabricated an AQFP circuit adopting delay-line clocking using the 10 kA/cm2 Nb high-speed standard process provided by the National Institute of Advanced Industrial Science and Technology. The circuit was demonstrated at 4 GHz with a latency of 10 ps per gate. The above results indicate that delay-line clocking can significantly reduce the latency in AQFP logic.

Applied Physics Letters•Aug 12, 2019•33 citations

Demonstration of 10k Gate-Scale Adiabatic-Quantum-Flux-Parametron Circuits

Tatsuya Narama, Yuki Yamanashi, Naoki Takeuchi +2 more

Adiabatic quantum flux parametron (AQFP) is a very energy-efficient superconductor logic. In AQFP logic, dynamic energy dissipation can be drastically reduced due to adiabatic switching operations using ac excitation currents. In the present study, we evaluated circuit yields using a large-scale AQFP circuit composed of as many as 10,000 AQFP gates with approximately 20,000 Josephson junctions. We measured eleven chips from four wafers and obtained circuit yields of 48% for 1,000-gate circuits and 22% for 10,000-gate circuits, respectively. In all the circuits, which worked correctly, the margins of excitation currents were as wide as approximately ±20%.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2015•13 citations
We have studied ultra-low-power superconductor circuits using adiabatic quantum flux parametron (AQFP) logic. Latches, which store logic data in logic circuits, are indispensable logic elements in the realization of AQFP computing systems. Among them, feedback latches, which hold data by using a feedback loop, have advantages in terms of their wide operation margins and high stability. Their drawbacks are their large junction counts and long latency. In this paper, we propose a majority gate-based feedback latch for AQFP logic with a reduced number of junctions. We designed and fabricated the proposed AQFP latches using a standard National Institute of Advanced Industrial Science and Technology (AIST) process. The measurement results showed that the feedback latches operate with wide operation margins that are comparable with circuit simulation results.
Abstract We have been developing adiabatic quantum-flux-parametron (AQFP) circuits as an ultra-low-power superconductor logic for energy-efficient computing. In a previous study, we proposed and demonstrated a quantum-flux-latch (QFL), which is a compact and compatible latch for AQFP logic. The QFL is composed of an AQFP buffer gate and a storage loop, which are directly connected to each other. However, the operation margins were not sufficiently wide due to a trade-off between the operation margins of the storage loop and that of the buffer gate. In this present study, we propose a magnetically coupled QFL (MC-QFL), where the storage loop and the buffer gate are physically separated and magnetically coupled to each other to eliminate the trade-off in the operation margins. The simulation results showed that the critical parameter margin of the MC-QFL is twice as large as that of the previously designed QFL. For comparison, we fabricated and demonstrated both the previously designed QFL and the newly designed MC-QFL. The measurement results showed that the MC-QFL has wider operation margins compared with the previously designed QFL.
Abstract Adiabatic quantum-flux-parametron (AQFP) logic stands as an energy-efficient superconductor logic family relying on ac excitations. Though a four-phase clocking scheme has been commonly applied to excite and clock AQFP circuits, the cost of multiple sources and long between-stage latency (a quarter clock cycle) remain unsatisfactory. These drawbacks are more severe for sequential logics, where feedback loops require both down-flow and reverse-flow AQFP gates, necessitating extra buffers and imposing a limit on operating depth at the same time. To overcome these restrictions, in this paper, we introduce a novel mixed clocking scheme for low-latency AQFP logic circuits allowing feedback loops. In particular, the down-flow part of the AQFP circuit is excited by an ac current through delay-lines, which can reduce the latency from input to output stages. Meanwhile, the reverse-flow part is clocked by 2 other ac currents with 90° phase difference to reduce the buffering gates. The proposed clocking scheme is first applied to a fundamental logic circuit, confirming correct functionality and low-latency operations for diverse feedback conditions. For experimental validation, we design and fabricate a 3-bit AQFP counter using the proposed clocking scheme based on an on-chip clock splitter. The circuit is examined at 4 GHz under 4.2 K temperature, where we obtain desired operations and wide excitation margins.
We have been investigating an ultra-low-power adiabatic quantum-flux-parametron (AQFP) logic, the energy dissipation of which can be decreased by changing its potential energy slowly or adiabatically. In the present study, we designed basic AQFP logic gates and an AQFP 1-bit full adder, and examined their operations through simulations and experiments. The AQFP 1-bit full adder is composed of 46 Josephson junctions, which is approximately one-quarter the number of junctions of a full adder using conventional rapid single-flux-quantum logic. The measurement results indicated that the AQFP 1-bit full adder has a wide current bias margin of as large as ±27.8%.
We experimentally demonstrated high-speed logic operations of adiabatic quantum-flux-parametron (AQFP) gates through the use of quantum-flux-latches (QFLs). In QFL-based high-speed test circuits (QHTCs), the output data of the circuits under test (CUTs), which are driven by high-speed excitation currents, are stored in QFLs and are slowly read out using low-speed excitation currents. We designed and fabricated three types of QHTCs using QFLs with different circuit parameters, where the CUTs were buffer gates and and gates. We confirmed the correct operation of buffer gates and and gates at 1 GHz. The obtained bias margins of the 1 GHz excitation currents were more than ±30% for each QHTC, which is wide enough for high-speed logic operations of AQFP gates.
Adiabatic quantum-flux-parametron (AQFP) logic is an energy-efficient superconductor logic family. The switching energy of an AQFP gate can be arbitrarily reduced via adiabatic switching. However, AQFP logic has somewhat long latency due to the multiphase clocking scheme, in which each logic operation requires a quarter clock cycle. The latency in AQFP logic should be improved in order to design complex digital circuits such as microprocessors. In the present paper, we propose a low-latency clocking scheme for AQFP logic, which we call delay-line clocking. In delay-line clocking, the latency for each logic operation is determined by the propagation delay of the excitation current, which can be much shorter than a quarter clock cycle. Our numerical simulation shows that AQFP gates can operate with a latency of only a few picoseconds. We fabricated an AQFP circuit adopting delay-line clocking using the 10 kA/cm2 Nb high-speed standard process provided by the National Institute of Advanced Industrial Science and Technology. The circuit was demonstrated at 4 GHz with a latency of 10 ps per gate. The above results indicate that delay-line clocking can significantly reduce the latency in AQFP logic.
Adiabatic quantum flux parametron (AQFP) is a very energy-efficient superconductor logic. In AQFP logic, dynamic energy dissipation can be drastically reduced due to adiabatic switching operations using ac excitation currents. In the present study, we evaluated circuit yields using a large-scale AQFP circuit composed of as many as 10,000 AQFP gates with approximately 20,000 Josephson junctions. We measured eleven chips from four wafers and obtained circuit yields of 48% for 1,000-gate circuits and 22% for 10,000-gate circuits, respectively. In all the circuits, which worked correctly, the margins of excitation currents were as wide as approximately ±20%.