Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IET Communications

Interference masking for secure wireless broadcast communications

Zhiguo Ding, Kin Kwong Leung, H. Vincent Poor

Published Apr 1, 2014• 2 citations
Publisher

Abstract

Physical layer security has been recognised as a promising technique to realise secure wireless communications. A novel interference masking approach is proposed for secure broadcast scenarios. Specifically, when there is an external jamming node, precoding matrices at the source and jammer are carefully designed to ensure that each destination can detect only its own message, and not the information intended for other destinations which is masked with artificial noise. When there is no external jamming node, interference masking is implemented through user cooperation, in which destinations switch roles from jammer to relay nodes during different time slots. Both analytical and numerical results are provided to demonstrate the performance of the proposed approaches.

DOI
10.1049/iet-com.2013.0330

Related papers

Research on physical layer security based on cooperative interference

Haiyan Huang, Yuxin Ai, Linlin Liang

Because of the openness of the wireless relay channel, the confidential information transmitted in the channel is very easy to be eavesdropped on by malicious eavesdroppers and cause information leakage. In specifically, a friendly jammer will transmit a jamming signal to confound an eavesdropper attempting to listen in on a relay transmission. For wireless relay networks using the Rayleigh fading channel model, this research proposes a physical layer security technique based on cooperative interference. In the system, we design two-time stages to realize the transmission of the source to the user. During the initial phase, the signal source transmits a composite signal to both the user and the relay. In the second phase, the confidential information is relayed and artificial noise is generated by friendly jammers to confuse eavesdroppers. Through our proposed method, we derive precise analytical expressions for the intercept probability (IP) and outage probability (OP). The correctness of the theoretical derivation is verified by numerical results and theoretical simulation.

International Conference on Computer Science and Communication Technology (ICCSCT)•Oct 11, 2023•0 citations

Two-phase cooperative jamming and beamforming for physical layer secrecy

Mohammad Hatami, Mojtaba Jahandideh, Hamid Behroozi

The broadcast nature of wireless communications makes the propagation medium vulnerable to security attacks such as eavesdropping and jamming from adversarial or unauthorized users. Applying physical layer secrecy approaches will enable the exchange of confidential messages over a wireless medium in the presence of unauthorized eavesdroppers, without using any secret keys. However, physical layer security approaches are typically feasible only when the source-eavesdropper channel is weaker than the source-destination channel. Cooperative jamming can be used to overcome this challenge and increase the secrecy rate. In this paper, the security of two-phase relaying system with multiple intermediate nodes and in the presence of an eavesdropper is investigated. To enhance the system secrecy rate, a joint cooperative beamforming and jamming combined with relay and jammer selections is proposed. In phase I, the source node broadcasts a signal to relays while three intermediate nodes (which act as jammers) help the source node by transmitting random jamming signals to confuse the eavesdropper. Since the friendly (cooperative) jammers create interference for both the intended relays and the eavesdropper, optimal beamforming is applied such that no interference is caused at two preselected desired relays (that are going to receive the confidential massage in phase I). In phase II, two preselected relays transmit the source message with beamforming coefficients such that the received signal at the eavesdropper is completely nulled out. Our goal in this paper is to minimize the received SNR at the eavesdropper while increasing it at the destination as much as possible by applying different methods such as cooperative beamforming, cooperative jamming and relay selection. To avoid operational complexity, we consider the minimum number of intermediate nodes that are necessary without losing the performance. Numerical results demonstrate the advantage of our proposed scheme compared with the scheme with no cooperative jamming.

Iranian Conference on Electrical Engineering•May 1, 2015•2 citations

Secure Relay and Jammer Selection for Physical Layer Security

Hui Hui, Arnold Lee Swindlehurst, Guobing Li +1 more

Secure relay and jammer selection for physical-layer security is studied in a wireless network with multiple intermediate nodes and eavesdroppers, where each intermediate node either helps to forward messages as a relay, or broadcasts noise as a jammer. We derive a closed-form expression for the secrecy outage probability (SOP), and we develop two relay and jammer selection methods for SOP minimization. In both methods a selection vector and a corresponding threshold are designed and broadcast by the destination to ensure each intermediate node knows its own role while knowledge of the relay and jammer set is kept secret from all eavesdroppers. Simulation results show the SOP of the proposed methods are very close to that obtained by an exhaustive search, and that maintaining the privacy of the selection result greatly improves the SOP performance.

IEEE Signal Processing Letters•Jan 6, 2015•116 citations

Cooperative Jamming and Relay Beamforming Design for Physical Layer Secure Two-Way Relaying

Zonghao Ma, Yanhui Lu, Lingfeng Shen +2 more

In this work, physical layer secure transmission of a cooperative wireless communication system over a three-phase amplify-and-forward (AF) two-way relaying channels is studied. A cooperative jamming and multi-antenna relay beamforming scheme that improves physical layer security of the system is proposed. Specifically, it is suggested that in the first and second timeslots when the legitimate users transmit alternatively, a jamming signal can be transmitted by the legitimate party that is not transmitting information-bearing signals This scheme, compared with the approach using a dedicated jammer, achieves a similar jamming effect with reduced complexity. In the third time slot of the protocol, the relay uses two beamforming matrices to process the bidirectional information signals. The jamming signal components at the relay are projected onto the null space of the legitimate relay-destination channels such that they do not affect legitimate communications. Through joint optimization, the sum throughput of the legitimate communication is maximized. In the numerical examples, the proposed scheme is shown to improve the system's secrecy transmission performance.

International Conference on Cyber-Enabled Distributed Computing and Knowledge Discovery (CyberC)•Oct 1, 2018•3 citations

Cooperative jamming for wireless physical layer security

Lun Dong, Zhu Han, Athina P. Petropulu +1 more

Cooperative jamming is an approach that has been recently proposed for improving physical layer based security for wireless networks in the presence of an eavesdropper. While the source transmits its message to its destination, a relay node transmits a jamming signal to create interference at the eavesdropper. In this paper, a scenario in which the relay is equipped with multiple antennas is considered. A novel system design is proposed for determining the antenna weights and transmit power of source and relay, so that the system secrecy rate is maximized subject to a total transmit power constraint, or, the transmit power is minimized subject to a secrecy rate constraint. Since the optimal solutions to these problems are difficult to obtain, suboptimal closed-form solutions are proposed that introduce an additional constraint, i.e., the complete nulling of jamming signal at the destination.

arXiv:0907.4996•IEEE Statistical Signal Processing Workshop (SSP)•Aug 1, 2009•129 citations

Hybrid relaying and jamming for wireless physical layer security based on cooperative beamforming

HuiMing WANG, Miao Luo, Qinye Yin

To improve the information-theoretic security of two-way wireless cooperative communication systems, we propose in this study a hybrid relaying and jamming mechanism based on multi-node cooperative beamforming to enhance the security of the physical layer transmission of information. The basic concept is that in the cooperative transmission phase, some intermediate nodes adopt distributed beamforming to help the transmitter send messages to legitimate users and simultaneously others jam the eavesdropper, which can significantly improve the security performance of the system in the broadcast phase. Two different cooperative beamforming schemes are proposed with and without the instantaneous channel state information (CSI) of the eavesdropper. We show that optimizing both the schemes requires the mathematical solving of one or a series of second-order convex cone programming (SOCP) problems, which can be executed by efficiently using the interior point method. Simulation and comparisons show that our proposed hybrid relaying, jamming mechanism and beamforming approaches significantly increase the security sum rate of the two source terminals and outperform both the relays-only and jammers-only mechanisms when the number of intermediate nodes is relatively large.

Scientia Sinica Informationis•Apr 1, 2013•4 citations
Physical layer security has been recognised as a promising technique to realise secure wireless communications. A novel interference masking approach is proposed for secure broadcast scenarios. Specifically, when there is an external jamming node, precoding matrices at the source and jammer are carefully designed to ensure that each destination can detect only its own message, and not the information intended for other destinations which is masked with artificial noise. When there is no external jamming node, interference masking is implemented through user cooperation, in which destinations switch roles from jammer to relay nodes during different time slots. Both analytical and numerical results are provided to demonstrate the performance of the proposed approaches.
Because of the openness of the wireless relay channel, the confidential information transmitted in the channel is very easy to be eavesdropped on by malicious eavesdroppers and cause information leakage. In specifically, a friendly jammer will transmit a jamming signal to confound an eavesdropper attempting to listen in on a relay transmission. For wireless relay networks using the Rayleigh fading channel model, this research proposes a physical layer security technique based on cooperative interference. In the system, we design two-time stages to realize the transmission of the source to the user. During the initial phase, the signal source transmits a composite signal to both the user and the relay. In the second phase, the confidential information is relayed and artificial noise is generated by friendly jammers to confuse eavesdroppers. Through our proposed method, we derive precise analytical expressions for the intercept probability (IP) and outage probability (OP). The correctness of the theoretical derivation is verified by numerical results and theoretical simulation.
The broadcast nature of wireless communications makes the propagation medium vulnerable to security attacks such as eavesdropping and jamming from adversarial or unauthorized users. Applying physical layer secrecy approaches will enable the exchange of confidential messages over a wireless medium in the presence of unauthorized eavesdroppers, without using any secret keys. However, physical layer security approaches are typically feasible only when the source-eavesdropper channel is weaker than the source-destination channel. Cooperative jamming can be used to overcome this challenge and increase the secrecy rate. In this paper, the security of two-phase relaying system with multiple intermediate nodes and in the presence of an eavesdropper is investigated. To enhance the system secrecy rate, a joint cooperative beamforming and jamming combined with relay and jammer selections is proposed. In phase I, the source node broadcasts a signal to relays while three intermediate nodes (which act as jammers) help the source node by transmitting random jamming signals to confuse the eavesdropper. Since the friendly (cooperative) jammers create interference for both the intended relays and the eavesdropper, optimal beamforming is applied such that no interference is caused at two preselected desired relays (that are going to receive the confidential massage in phase I). In phase II, two preselected relays transmit the source message with beamforming coefficients such that the received signal at the eavesdropper is completely nulled out. Our goal in this paper is to minimize the received SNR at the eavesdropper while increasing it at the destination as much as possible by applying different methods such as cooperative beamforming, cooperative jamming and relay selection. To avoid operational complexity, we consider the minimum number of intermediate nodes that are necessary without losing the performance. Numerical results demonstrate the advantage of our proposed scheme compared with the scheme with no cooperative jamming.
Secure relay and jammer selection for physical-layer security is studied in a wireless network with multiple intermediate nodes and eavesdroppers, where each intermediate node either helps to forward messages as a relay, or broadcasts noise as a jammer. We derive a closed-form expression for the secrecy outage probability (SOP), and we develop two relay and jammer selection methods for SOP minimization. In both methods a selection vector and a corresponding threshold are designed and broadcast by the destination to ensure each intermediate node knows its own role while knowledge of the relay and jammer set is kept secret from all eavesdroppers. Simulation results show the SOP of the proposed methods are very close to that obtained by an exhaustive search, and that maintaining the privacy of the selection result greatly improves the SOP performance.
In this work, physical layer secure transmission of a cooperative wireless communication system over a three-phase amplify-and-forward (AF) two-way relaying channels is studied. A cooperative jamming and multi-antenna relay beamforming scheme that improves physical layer security of the system is proposed. Specifically, it is suggested that in the first and second timeslots when the legitimate users transmit alternatively, a jamming signal can be transmitted by the legitimate party that is not transmitting information-bearing signals This scheme, compared with the approach using a dedicated jammer, achieves a similar jamming effect with reduced complexity. In the third time slot of the protocol, the relay uses two beamforming matrices to process the bidirectional information signals. The jamming signal components at the relay are projected onto the null space of the legitimate relay-destination channels such that they do not affect legitimate communications. Through joint optimization, the sum throughput of the legitimate communication is maximized. In the numerical examples, the proposed scheme is shown to improve the system's secrecy transmission performance.
Cooperative jamming is an approach that has been recently proposed for improving physical layer based security for wireless networks in the presence of an eavesdropper. While the source transmits its message to its destination, a relay node transmits a jamming signal to create interference at the eavesdropper. In this paper, a scenario in which the relay is equipped with multiple antennas is considered. A novel system design is proposed for determining the antenna weights and transmit power of source and relay, so that the system secrecy rate is maximized subject to a total transmit power constraint, or, the transmit power is minimized subject to a secrecy rate constraint. Since the optimal solutions to these problems are difficult to obtain, suboptimal closed-form solutions are proposed that introduce an additional constraint, i.e., the complete nulling of jamming signal at the destination.
To improve the information-theoretic security of two-way wireless cooperative communication systems, we propose in this study a hybrid relaying and jamming mechanism based on multi-node cooperative beamforming to enhance the security of the physical layer transmission of information. The basic concept is that in the cooperative transmission phase, some intermediate nodes adopt distributed beamforming to help the transmitter send messages to legitimate users and simultaneously others jam the eavesdropper, which can significantly improve the security performance of the system in the broadcast phase. Two different cooperative beamforming schemes are proposed with and without the instantaneous channel state information (CSI) of the eavesdropper. We show that optimizing both the schemes requires the mathematical solving of one or a series of second-order convex cone programming (SOCP) problems, which can be executed by efficiently using the interior point method. Simulation and comparisons show that our proposed hybrid relaying, jamming mechanism and beamforming approaches significantly increase the security sum rate of the two source terminals and outperform both the relays-only and jammers-only mechanisms when the number of intermediate nodes is relatively large.