Cooperative jamming is an approach that has been recently proposed for improving physical layer based security for wireless networks in the presence of an eavesdropper. While the source transmits its message to its destination, a relay node transmits a jamming signal to create interference at the eavesdropper. In this paper, a scenario in which the relay is equipped with multiple antennas is considered. A novel system design is proposed for determining the antenna weights and transmit power of source and relay, so that the system secrecy rate is maximized subject to a total transmit power constraint, or, the transmit power is minimized subject to a secrecy rate constraint. Since the optimal solutions to these problems are difficult to obtain, suboptimal closed-form solutions are proposed that introduce an additional constraint, i.e., the complete nulling of jamming signal at the destination.
Cooperative jamming is an approach that has been recently proposed for improving physical layer based security for wireless networks in the presence of an eavesdropper. While the source transmits its message to its destination, a relay node transmits a jamming signal to create interference at the eavesdropper. In this paper, a scenario in which the relay is equipped with multiple antennas is considered. A novel system design is proposed for determining the antenna weights and transmit power of source and relay, so that the system secrecy rate is maximized subject to a total transmit power constraint, or, the transmit power is minimized subject to a secrecy rate constraint. Since the optimal solutions to these problems are difficult to obtain, suboptimal closed-form solutions are proposed that introduce an additional constraint, i.e., the complete nulling of jamming signal at the destination.
Physical (PHY) layer security approaches for wireless communications can prevent eavesdropping without upper layer data encryption. However, they are hampered by wireless channel conditions: absent feedback, they are typically feasible only when the source-destination channel is better than the source-eavesdropper channel. Node cooperation is a means to overcome this challenge and improve the performance of secure wireless communications. This paper addresses secure communications of one source-destination pair with the help of multiple cooperating relays in the presence of one or more eavesdroppers. Three cooperative schemes are considered: decode-and-forward (DF), amplify-and-forward (AF), and cooperative jamming (CJ). For these schemes, the relays transmit a weighted version of a reencoded noise-free message signal (for DF), a received noisy source signal (for AF), or a common jamming signal (for CJ). Novel system designs are proposed, consisting of the determination of relay weights and the allocation of transmit power, that maximize the achievable secrecy rate subject to a transmit power constraint, or, minimize the transmit power subject to a secrecy rate constraint. For DF in the presence of one eavesdropper, closed-form optimal solutions are derived for the relay weights. For other problems, since the optimal relay weights are difficult to obtain, several criteria are considered leading to suboptimal but simple solutions, i.e., the complete nulling of the message signals at all eavesdroppers (for DF and AF), or the complete nulling of jamming signal at the destination (for CJ). Based on the designed relay weights, for DF in the presence of multiple eavesdroppers, and for CJ in the presence of one eavesdropper, the optimal power allocation is obtained in closed-form; in all other cases the optimal power allocation is obtained via iterative algorithms. Numerical evaluation of the obtained secrecy rate and transmit power results show that the proposed design can significantly improve the performance of secure wireless communications.
We consider a cooperative wireless network in the presence of one or more eavesdroppers, and exploit node cooperation for achieving physical (PHY) layer based security. Two different cooperation schemes are considered. In the first scheme, cooperating nodes retransmit a weighted version of the source signal in a decode-and-forward (DF) fashion. In the second scheme, referred to as cooperative jamming (CJ), while the source is transmitting, cooperating nodes transmit weighted noise to confound the eavesdropper. We investigate two objectives: i) maximization of the achievable secrecy rate subject to a total power constraint and ii) minimization of the total power transmit power under a secrecy rate constraint. For the first design objective, we obtain the exact solution for the DF scheme for the case of a single or multiple eavasdroppers, while for the CJ scheme with a single eavesdropper we reduce the multivariate problem to a problem of one variable. For the second design objective, existing work introduces additional constraints in order to reduce the degree of difficulty, thus resulting in suboptimal solutions. Our work raises those constraints, and obtains either an analytical solution for the DF scheme with a single eavesdropper, or reduces the multivariate problem to a problem of one variable for the CJ scheme with a single eavesdropper. Numerical results are presented to illustrate the proposed results and compare them to existing work.
We employed node cooperation in a cooperative wireless network to achieve physical layer- based security. The case of a source-destination pair that works with the assistance of multiple cooperating nodes in the presence of an eavesdropper was considered in this study to improve the performance of secure wireless communications. A novel cooperative scheme, called the decode-and-forward plus cooperative jamming (DFCJ), was proposed. In this scheme, relay nodes transmit a weighted version of the source signals plus a common weighted jamming signal to confound the eavesdropper. The novel system design was proposed to determine cooperative node weights and transmit power allocation. In DFCJ, a closed-form solution is obtained to minimize the total transmit power that is subjected to a secrecy rate constraint under complete nulling of jamming signals at the destination. The results of the numerical evaluation of the transmit power and the obtained secrecy rate show that the proposed scheme can significantly improve the performance of wireless physical layer security compared with the original decode-and-forward scheme.
In a cooperative wireless network, we exploited node cooperation for achieving physical layer based security. In this paper, the case of one source-destination pair with the help of multiple cooperating nodes(relay nodes and jamming nodes) in the presence of one eavesdropper was considered to improve the performance of secure wireless communications. A novel cooperative scheme joint decode-and-forward and cooperative jamming(JDFCJ) was proposed. In this scheme, the relay nodes transmit a weighted version of the source signals and the jamming nodes just transmit a common weighted jamming signal to confound the eavesdropper. The novel system design is proposed to minimize the transmit power subject to a secrecy rate constraint. For JDFCJ, the optimal power allocation is obtained in closed-form in the condition of the complete nulling of jamming signals at the destination. The numerical evaluation of the transmit power results shows that the proposed scheme can significantly improve the performance of secure wireless communications, as compared to the DF scheme.
The broadcast nature of wireless communications makes the propagation medium vulnerable to security attacks such as eavesdropping and jamming from adversarial or unauthorized users. Applying physical layer secrecy approaches will enable the exchange of confidential messages over a wireless medium in the presence of unauthorized eavesdroppers, without using any secret keys. However, physical layer security approaches are typically feasible only when the source-eavesdropper channel is weaker than the source-destination channel. Cooperative jamming can be used to overcome this challenge and increase the secrecy rate. In this paper, the security of two-phase relaying system with multiple intermediate nodes and in the presence of an eavesdropper is investigated. To enhance the system secrecy rate, a joint cooperative beamforming and jamming combined with relay and jammer selections is proposed. In phase I, the source node broadcasts a signal to relays while three intermediate nodes (which act as jammers) help the source node by transmitting random jamming signals to confuse the eavesdropper. Since the friendly (cooperative) jammers create interference for both the intended relays and the eavesdropper, optimal beamforming is applied such that no interference is caused at two preselected desired relays (that are going to receive the confidential massage in phase I). In phase II, two preselected relays transmit the source message with beamforming coefficients such that the received signal at the eavesdropper is completely nulled out. Our goal in this paper is to minimize the received SNR at the eavesdropper while increasing it at the destination as much as possible by applying different methods such as cooperative beamforming, cooperative jamming and relay selection. To avoid operational complexity, we consider the minimum number of intermediate nodes that are necessary without losing the performance. Numerical results demonstrate the advantage of our proposed scheme compared with the scheme with no cooperative jamming.
A wireless network with one source, one destination, one eavesdropper and multiple decode-and-forward (DF) relays is considered. A two-slot cooperative relaying scheme is proposed that targets at maximizing the secrecy rate. In the first slot, the source transmits the information bearing signal, and at the same time, it cooperates with the destination in jamming the eavesdropper without creating interference at the relay. In the second slot, one optimally selected relay retransmits the decoded source signal, and at the same time, it cooperates with the source to jam the eavesdropper without creating interference at the destination. For the beamforming, no eavesdropper channel information is required. Optimal relay selection and also optimal power allocation among the first/second slot data signal and jamming noise are proposed. It is shown that the system secrecy rate of the proposed scheme scales with the total system power, P0and the number of available relays, K, according to log2(1 + P0/8 log K) - 1.6252bps.