In this work, physical layer secure transmission of a cooperative wireless communication system over a three-phase amplify-and-forward (AF) two-way relaying channels is studied. A cooperative jamming and multi-antenna relay beamforming scheme that improves physical layer security of the system is proposed. Specifically, it is suggested that in the first and second timeslots when the legitimate users transmit alternatively, a jamming signal can be transmitted by the legitimate party that is not transmitting information-bearing signals This scheme, compared with the approach using a dedicated jammer, achieves a similar jamming effect with reduced complexity. In the third time slot of the protocol, the relay uses two beamforming matrices to process the bidirectional information signals. The jamming signal components at the relay are projected onto the null space of the legitimate relay-destination channels such that they do not affect legitimate communications. Through joint optimization, the sum throughput of the legitimate communication is maximized. In the numerical examples, the proposed scheme is shown to improve the system's secrecy transmission performance.
In this work, physical layer secure transmission of a cooperative wireless communication system over a three-phase amplify-and-forward (AF) two-way relaying channels is studied. A cooperative jamming and multi-antenna relay beamforming scheme that improves physical layer security of the system is proposed. Specifically, it is suggested that in the first and second timeslots when the legitimate users transmit alternatively, a jamming signal can be transmitted by the legitimate party that is not transmitting information-bearing signals This scheme, compared with the approach using a dedicated jammer, achieves a similar jamming effect with reduced complexity. In the third time slot of the protocol, the relay uses two beamforming matrices to process the bidirectional information signals. The jamming signal components at the relay are projected onto the null space of the legitimate relay-destination channels such that they do not affect legitimate communications. Through joint optimization, the sum throughput of the legitimate communication is maximized. In the numerical examples, the proposed scheme is shown to improve the system's secrecy transmission performance.
The broadcast nature of wireless communications makes the propagation medium vulnerable to security attacks such as eavesdropping and jamming from adversarial or unauthorized users. Applying physical layer secrecy approaches will enable the exchange of confidential messages over a wireless medium in the presence of unauthorized eavesdroppers, without using any secret keys. However, physical layer security approaches are typically feasible only when the source-eavesdropper channel is weaker than the source-destination channel. Cooperative jamming can be used to overcome this challenge and increase the secrecy rate. In this paper, the security of two-phase relaying system with multiple intermediate nodes and in the presence of an eavesdropper is investigated. To enhance the system secrecy rate, a joint cooperative beamforming and jamming combined with relay and jammer selections is proposed. In phase I, the source node broadcasts a signal to relays while three intermediate nodes (which act as jammers) help the source node by transmitting random jamming signals to confuse the eavesdropper. Since the friendly (cooperative) jammers create interference for both the intended relays and the eavesdropper, optimal beamforming is applied such that no interference is caused at two preselected desired relays (that are going to receive the confidential massage in phase I). In phase II, two preselected relays transmit the source message with beamforming coefficients such that the received signal at the eavesdropper is completely nulled out. Our goal in this paper is to minimize the received SNR at the eavesdropper while increasing it at the destination as much as possible by applying different methods such as cooperative beamforming, cooperative jamming and relay selection. To avoid operational complexity, we consider the minimum number of intermediate nodes that are necessary without losing the performance. Numerical results demonstrate the advantage of our proposed scheme compared with the scheme with no cooperative jamming.
To improve the information-theoretic security of two-way wireless cooperative communication systems, we propose in this study a hybrid relaying and jamming mechanism based on multi-node cooperative beamforming to enhance the security of the physical layer transmission of information. The basic concept is that in the cooperative transmission phase, some intermediate nodes adopt distributed beamforming to help the transmitter send messages to legitimate users and simultaneously others jam the eavesdropper, which can significantly improve the security performance of the system in the broadcast phase. Two different cooperative beamforming schemes are proposed with and without the instantaneous channel state information (CSI) of the eavesdropper. We show that optimizing both the schemes requires the mathematical solving of one or a series of second-order convex cone programming (SOCP) problems, which can be executed by efficiently using the interior point method. Simulation and comparisons show that our proposed hybrid relaying, jamming mechanism and beamforming approaches significantly increase the security sum rate of the two source terminals and outperform both the relays-only and jammers-only mechanisms when the number of intermediate nodes is relatively large.
In this paper, we investigate physical-layer transmission security problem of a two-way relay wireless network consisting of two legitimate terminal nodes who wants to communicate with each other in presence of one eavesdropper, with help of N intermediate nodes. We propose a cooperative relaying and jamming strategy, which selecting one intermediate node to create intentional interference upon the eavesdropper, while other K = N -1 intermediate nodes operating in relay mode and assisting the source nodes to deliver data to their corresponding destinations using an amplify-and-forward (AF) protocol. All N intermediate nodes in this system are under a per-node power constraint. When K ≥ 3, we propose two different system design criteria based on null-space beamforming, to maximize secrecy sum rate by rate-splitting method with a bisection numerical algorithm iteratively getting the maximal secrecy sum rate, or to maximize the minimum rate between the two terminals. And we also propose the modified security schemes when the number of intermediate nodes is not enough for the previously mentioned schemes (K <; 3).
In this paper, the security of two-phase relaying system with multiple intermediate nodes in the presence of a malicious eavesdropper is investigated. To enhance the secrecy, a joint cooperative beamforming and jamming combined with relay and jammer selection is proposed. First, the source broadcasts its signal to the relays that are located close to source in a cluster, i.e., the source node uses a small amount of power to broadcast its message locally to other nodes of the cluster, while destination and the eavesdropper are located outside this cluster. In the second phase, two relays transmit re-encoded signal with optimal beamforming such that the secrecy rate is maximized. Simultaneously, two other intermediate nodes (which act as friendly jammers) transmit random jamming signals to degrade the eavesdropper’s channel. Our goal in this paper is to maximize the secrecy rate by applying different methods such as cooperative beamforming, cooperative jamming and relay and jammer selection. To avoid operational complexity, we consider the minimum number of intermediate nodes needed for relaying and jamming without losing the performance, i.e., achieving a non-zero secrecy rate. Cooperative beamforming with multiple relays demands high amount of information exchange and therefore increases the operational complexity. Thus, we aim to reduce the number of relays which take part in cooperative beamforming. Limiting the number of relays may have a bad effect on the coding gain which we compensate it with a proposed selection gain scheme. Numerical results demonstrate the advantage of our proposed scheme compared to the scheme with no cooperative jamming. The main contribution of this work is combining cooperative beamforming and jamming with relay and jammer selection to enhance the physical layer security.
In this paper, we propose a destination-assisted jamming and beamforming (DAJB) scheme for physical layer security in a one-way cooperative amplify-and-forward (AF) relay communication system. The system model consists of one source, one destination, one eavesdropper, and N relay nodes, with the individual power constraint of each relay node and the destination-assisted jamming node as well as unknown instantaneous channel state information (CSI) of the eavesdropper. Due to the half-duplex constraint of the relay nodes, there are two phases in our proposed DAJB scheme. In the first phase, the source node broadcasts information signal and all N relay nodes listen simultaneously. In the meantime, the destination node transmits the jamming signal to confuse the potential eavesdropper. In the second phase, all N relay nodes amplify and forward the received signals, covered by the artificial noise (AN), to the destination using the distributed beamforming technology. The optimal beamformer weights and power allocation are obtained by solving the second-order convex cone programming (SOCP) together with a linear programming (LP) problem. Furthermore, the performance of the DAJB scheme is analyzed in terms of the achievable secrecy rate. Compared with the scheme that selects a relay node as the jammer, we obtain larger power gain to achieve higher secrecy rates. Finally, the simulation results verify that the DAJB scheme greatly improves the secrecy rate of a one-way cooperative AF relay communication system.
Physical (PHY) layer security approaches for wireless communications can prevent eavesdropping without upper layer data encryption. However, they are hampered by wireless channel conditions: absent feedback, they are typically feasible only when the source-destination channel is better than the source-eavesdropper channel. Node cooperation is a means to overcome this challenge and improve the performance of secure wireless communications. This paper addresses secure communications of one source-destination pair with the help of multiple cooperating relays in the presence of one or more eavesdroppers. Three cooperative schemes are considered: decode-and-forward (DF), amplify-and-forward (AF), and cooperative jamming (CJ). For these schemes, the relays transmit a weighted version of a reencoded noise-free message signal (for DF), a received noisy source signal (for AF), or a common jamming signal (for CJ). Novel system designs are proposed, consisting of the determination of relay weights and the allocation of transmit power, that maximize the achievable secrecy rate subject to a transmit power constraint, or, minimize the transmit power subject to a secrecy rate constraint. For DF in the presence of one eavesdropper, closed-form optimal solutions are derived for the relay weights. For other problems, since the optimal relay weights are difficult to obtain, several criteria are considered leading to suboptimal but simple solutions, i.e., the complete nulling of the message signals at all eavesdroppers (for DF and AF), or the complete nulling of jamming signal at the destination (for CJ). Based on the designed relay weights, for DF in the presence of multiple eavesdroppers, and for CJ in the presence of one eavesdropper, the optimal power allocation is obtained in closed-form; in all other cases the optimal power allocation is obtained via iterative algorithms. Numerical evaluation of the obtained secrecy rate and transmit power results show that the proposed design can significantly improve the performance of secure wireless communications.