Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

On Maximizing the Secrecy Rate in a Cooperative Wireless Network using Friendly Jammers

Mohammad Hatami, Hamid Behroozi

Published Sep 1, 2016• 1 citation
OpenAlex

Abstract

In this paper, the security of two-phase relaying system with multiple intermediate nodes in the presence of a malicious eavesdropper is investigated. To enhance the secrecy, a joint cooperative beamforming and jamming combined with relay and jammer selection is proposed. First, the source broadcasts its signal to the relays that are located close to source in a cluster, i.e., the source node uses a small amount of power to broadcast its message locally to other nodes of the cluster, while destination and the eavesdropper are located outside this cluster. In the second phase, two relays transmit re-encoded signal with optimal beamforming such that the secrecy rate is maximized. Simultaneously, two other intermediate nodes (which act as friendly jammers) transmit random jamming signals to degrade the eavesdropper’s channel. Our goal in this paper is to maximize the secrecy rate by applying different methods such as cooperative beamforming, cooperative jamming and relay and jammer selection. To avoid operational complexity, we consider the minimum number of intermediate nodes needed for relaying and jamming without losing the performance, i.e., achieving a non-zero secrecy rate. Cooperative beamforming with multiple relays demands high amount of information exchange and therefore increases the operational complexity. Thus, we aim to reduce the number of relays which take part in cooperative beamforming. Limiting the number of relays may have a bad effect on the coding gain which we compensate it with a proposed selection gain scheme. Numerical results demonstrate the advantage of our proposed scheme compared to the scheme with no cooperative jamming. The main contribution of this work is combining cooperative beamforming and jamming with relay and jammer selection to enhance the physical layer security.

Related papers

Two-phase cooperative jamming and beamforming for physical layer secrecy

Mohammad Hatami, Mojtaba Jahandideh, Hamid Behroozi

The broadcast nature of wireless communications makes the propagation medium vulnerable to security attacks such as eavesdropping and jamming from adversarial or unauthorized users. Applying physical layer secrecy approaches will enable the exchange of confidential messages over a wireless medium in the presence of unauthorized eavesdroppers, without using any secret keys. However, physical layer security approaches are typically feasible only when the source-eavesdropper channel is weaker than the source-destination channel. Cooperative jamming can be used to overcome this challenge and increase the secrecy rate. In this paper, the security of two-phase relaying system with multiple intermediate nodes and in the presence of an eavesdropper is investigated. To enhance the system secrecy rate, a joint cooperative beamforming and jamming combined with relay and jammer selections is proposed. In phase I, the source node broadcasts a signal to relays while three intermediate nodes (which act as jammers) help the source node by transmitting random jamming signals to confuse the eavesdropper. Since the friendly (cooperative) jammers create interference for both the intended relays and the eavesdropper, optimal beamforming is applied such that no interference is caused at two preselected desired relays (that are going to receive the confidential massage in phase I). In phase II, two preselected relays transmit the source message with beamforming coefficients such that the received signal at the eavesdropper is completely nulled out. Our goal in this paper is to minimize the received SNR at the eavesdropper while increasing it at the destination as much as possible by applying different methods such as cooperative beamforming, cooperative jamming and relay selection. To avoid operational complexity, we consider the minimum number of intermediate nodes that are necessary without losing the performance. Numerical results demonstrate the advantage of our proposed scheme compared with the scheme with no cooperative jamming.

Iranian Conference on Electrical Engineering•May 1, 2015•2 citations

Joint Cooperative Beamforming and Jamming for Physical-Layer Security of Decode-and-Forward Relay Networks

Haiyan Guo, Zhen Yang, Linghua Zhang +2 more

This paper proposes a new joint cooperative beamforming and jamming (JCBJ) scheme for improving the physical layer security of decode-and-forward wireless networks where a source node transmits to its destination with the aid of multiple intermediate nodes in the presence of an eavesdropper. In the proposed JCBJ scheme, we select the intermediate nodes succeeding in source decoding as the relays to forward the source transmission simultaneously by employing a beamforming weight vector, and meanwhile, use the remaining ones as the friendly jammers to disturb the eavesdropper by sending artificial noise. In order to achieve the secrecy rate maximum, we further study on the power allocation among the source, relays, and jammers under two assumptions of the wiretap link's channel state information. We derive the closed-form optimal solutions by first allocating the transmit power at the source within different ranges to consider all the possible relay selection schemes in which different numbers of relays are employed, and then transforming the multivariable power allocation problem to a set of single-variable optimization subproblems. Our numerical results show the superiority of the proposed JCBJ scheme and the proposed power allocation strategies.

IEEE Access•Jan 1, 2017•36 citations

Power-Constrained Secrecy Rate Maximization for Joint Relay and Jammer Selection Assisted Wireless Networks

Haiyan Guo, Zhen Yang, Linghua Zhang +2 more

In this paper, we examine the physical layer security for cooperative wireless networks with multiple intermediate nodes, where the decode-and-forward protocol is considered. We propose a new joint relay and jammer selection (JRJS) scheme for protecting wireless communications against eavesdropping, where an intermediate node is selected as the relay for the sake of forwarding the source signal to the destination and meanwhile, the remaining intermediate nodes are employed to act as friendly jammers, which broadcast the artificial noise for disturbing the eavesdropper. We further investigate the power allocation among the source, relay and friendly jammers for maximizing the secrecy rate of proposed JRJS scheme, and derive a closed-form sub-optimal solution. Specifically, all the intermediate nodes, which successfully decode the source signal, are considered as relay candidates. For each candidate, we derive the sub-optimal closed-form power allocation solution and obtain the secrecy rate result of the corresponding JRJS scheme. Then, the candidate, which is capable of achieving the highest secrecy rate, is selected as the relay. Two assumptions about the channel state information (CSI), namely the full CSI (FCSI) and partial CSI (PCSI), are considered. Simulation results show that the proposed JRJS scheme outperforms the conventional pure relay selection, pure jamming, and generalized singular-value-decomposition-based beamforming schemes in terms of secrecy rate. Additionally, the proposed FCSI-based power allocation and PCSI-based power allocation schemes both achieve higher secrecy rates than the equal power allocation scheme.

arXiv:1701.01820•IEEE Transactions on Communications•Jan 10, 2017•45 citations

Joint cooperative relaying and jamming for maximum secrecy capacity in wireless networks

Li Wang, Chunyan Cao, Mei Na Song +1 more

This paper proposes a joint cooperative relaying and jamming scheme based on distributed beamforming to enhance the secrecy rate of a wireless channel in the presence of an eavesdropper. Specifically, we consider the scenario that a source node transmits messages to a destination with the help of multiple cooperative relays, where a relay might be compromised to become an eavesdropper as an inside attacker. Our joint relaying and jamming approach is to assign some relay nodes to act as jammers to interfere the eavesdropper, while the remaining ones continue relaying information to the destination. We propose a protocol to implement the joint cooperative relaying and jamming. Our protocol further considers the particular challenge brought by the inside attacker: it may know the jamming signal and can use it to remove the interference from the jammers. The issue of phase and frequency synchronization in the distributed beamforming is also taken into account. A mixed integer programming problem is formulated to maximize the secrecy rate with the proposed joint relaying and jamming, by which the optimal role assignment to a relay and the associated optimal power assignment can be solved. Numerical results are presented to demonstrate the efficiency of the proposed joint relaying and jamming in improving the secrecy rate, with comparison to existing approaches.

International Conference on Communications•Jun 1, 2014•15 citations

Destination Assisted Secret Transmission in Wireless Relay Networks

Shaobo Jia, Jiayan Zhang, Honglin Zhao +1 more

To improve physical (PHY) layer security of a wireless relay system in the presence of an eavesdropper, a two-phase cooperative relaying scheme is investigated in this paper. In phase I, the source transmits confidential message, simultaneously, it cooperates with the friendly jammers and destination to create jamming signal at the eavesdropper without affecting the forwarding relay which is preselected. In phase II, the forwarding relay retransmits the decoded signal, meanwhile, the particular relay cooperates with the friendly jammers to create jamming signal at the eavesdropper without affecting the destination. We focus on the investigation of optimal power allocation for maximizing achievable secrecy rate subject to a total power constraint. Optimal relay selection and suboptimal relay selection schemes are also proposed. It is shown that as the number of relays increases, both secrecy rate and the performance of suboptimal relay selection scheme improve significantly. Numerical results are presented to validate the derived analytical results and compare them to existing work.

IEEE Vehicular Technology Conference•Sep 1, 2016•2 citations

Secure Beamforming for Cooperative Wireless-Powered Networks With Partial CSI

Haiyan Guo, Zhen Yang, Yulong Zou +3 more

In this paper, we investigate the physical layer security (PLS) of cooperative wireless-powered networks where a source transmits confidential information to a destination with the aid of wireless-powered intermediate nodes equipped with multiple antennas in the presence of a passive eavesdropper. We consider two generalized joint relay and jammer selection (GJRJS) frameworks based on the power splitting (PS) and time switching (TS) techniques, respectively. Specifically, the intermediate nodes which cannot decode the source signal successfully are selected to act as friendly jammers to transmit artificial noise, and the remaining nodes are exploited as relays to simultaneously forward the source signal through cooperative beamforming. We further propose two cooperative secure beamforming (CSB) schemes for the PS-based GJRJS (PS-GJRJS) and TS-based GJRJS (TS-GJRJS) frameworks, respectively. To be specific, we investigate the optimization of the beamforming vector of our selected relays for maximizing the secrecy rate of the source–destination transmission. A closed-form solution is derived under the assumption of available instantaneous channel state information (CSI) of the main link and statistical CSI of the wiretap link. In addition, we also illustrate that the pure relay selection (PRS) scheme is a special case of our GJRJS framework at high signal-to-noise ratios (SNRs). The numerical results show that the proposed CSB scheme achieves a higher secrecy rate than the traditional maximal ratio transmission (MRT) method for both the PS-GJRJS and TS-GJRJS frameworks. Additionally, the GJRJS framework outperforms the PRS as well as the joint best relay and jammer selection (JBRJS) methods in terms of secrecy rate.

IEEE Internet of Things Journal•Apr 16, 2019•15 citations
In this paper, the security of two-phase relaying system with multiple intermediate nodes in the presence of a malicious eavesdropper is investigated. To enhance the secrecy, a joint cooperative beamforming and jamming combined with relay and jammer selection is proposed. First, the source broadcasts its signal to the relays that are located close to source in a cluster, i.e., the source node uses a small amount of power to broadcast its message locally to other nodes of the cluster, while destination and the eavesdropper are located outside this cluster. In the second phase, two relays transmit re-encoded signal with optimal beamforming such that the secrecy rate is maximized. Simultaneously, two other intermediate nodes (which act as friendly jammers) transmit random jamming signals to degrade the eavesdropper’s channel. Our goal in this paper is to maximize the secrecy rate by applying different methods such as cooperative beamforming, cooperative jamming and relay and jammer selection. To avoid operational complexity, we consider the minimum number of intermediate nodes needed for relaying and jamming without losing the performance, i.e., achieving a non-zero secrecy rate. Cooperative beamforming with multiple relays demands high amount of information exchange and therefore increases the operational complexity. Thus, we aim to reduce the number of relays which take part in cooperative beamforming. Limiting the number of relays may have a bad effect on the coding gain which we compensate it with a proposed selection gain scheme. Numerical results demonstrate the advantage of our proposed scheme compared to the scheme with no cooperative jamming. The main contribution of this work is combining cooperative beamforming and jamming with relay and jammer selection to enhance the physical layer security.
The broadcast nature of wireless communications makes the propagation medium vulnerable to security attacks such as eavesdropping and jamming from adversarial or unauthorized users. Applying physical layer secrecy approaches will enable the exchange of confidential messages over a wireless medium in the presence of unauthorized eavesdroppers, without using any secret keys. However, physical layer security approaches are typically feasible only when the source-eavesdropper channel is weaker than the source-destination channel. Cooperative jamming can be used to overcome this challenge and increase the secrecy rate. In this paper, the security of two-phase relaying system with multiple intermediate nodes and in the presence of an eavesdropper is investigated. To enhance the system secrecy rate, a joint cooperative beamforming and jamming combined with relay and jammer selections is proposed. In phase I, the source node broadcasts a signal to relays while three intermediate nodes (which act as jammers) help the source node by transmitting random jamming signals to confuse the eavesdropper. Since the friendly (cooperative) jammers create interference for both the intended relays and the eavesdropper, optimal beamforming is applied such that no interference is caused at two preselected desired relays (that are going to receive the confidential massage in phase I). In phase II, two preselected relays transmit the source message with beamforming coefficients such that the received signal at the eavesdropper is completely nulled out. Our goal in this paper is to minimize the received SNR at the eavesdropper while increasing it at the destination as much as possible by applying different methods such as cooperative beamforming, cooperative jamming and relay selection. To avoid operational complexity, we consider the minimum number of intermediate nodes that are necessary without losing the performance. Numerical results demonstrate the advantage of our proposed scheme compared with the scheme with no cooperative jamming.
This paper proposes a new joint cooperative beamforming and jamming (JCBJ) scheme for improving the physical layer security of decode-and-forward wireless networks where a source node transmits to its destination with the aid of multiple intermediate nodes in the presence of an eavesdropper. In the proposed JCBJ scheme, we select the intermediate nodes succeeding in source decoding as the relays to forward the source transmission simultaneously by employing a beamforming weight vector, and meanwhile, use the remaining ones as the friendly jammers to disturb the eavesdropper by sending artificial noise. In order to achieve the secrecy rate maximum, we further study on the power allocation among the source, relays, and jammers under two assumptions of the wiretap link's channel state information. We derive the closed-form optimal solutions by first allocating the transmit power at the source within different ranges to consider all the possible relay selection schemes in which different numbers of relays are employed, and then transforming the multivariable power allocation problem to a set of single-variable optimization subproblems. Our numerical results show the superiority of the proposed JCBJ scheme and the proposed power allocation strategies.
In this paper, we examine the physical layer security for cooperative wireless networks with multiple intermediate nodes, where the decode-and-forward protocol is considered. We propose a new joint relay and jammer selection (JRJS) scheme for protecting wireless communications against eavesdropping, where an intermediate node is selected as the relay for the sake of forwarding the source signal to the destination and meanwhile, the remaining intermediate nodes are employed to act as friendly jammers, which broadcast the artificial noise for disturbing the eavesdropper. We further investigate the power allocation among the source, relay and friendly jammers for maximizing the secrecy rate of proposed JRJS scheme, and derive a closed-form sub-optimal solution. Specifically, all the intermediate nodes, which successfully decode the source signal, are considered as relay candidates. For each candidate, we derive the sub-optimal closed-form power allocation solution and obtain the secrecy rate result of the corresponding JRJS scheme. Then, the candidate, which is capable of achieving the highest secrecy rate, is selected as the relay. Two assumptions about the channel state information (CSI), namely the full CSI (FCSI) and partial CSI (PCSI), are considered. Simulation results show that the proposed JRJS scheme outperforms the conventional pure relay selection, pure jamming, and generalized singular-value-decomposition-based beamforming schemes in terms of secrecy rate. Additionally, the proposed FCSI-based power allocation and PCSI-based power allocation schemes both achieve higher secrecy rates than the equal power allocation scheme.
This paper proposes a joint cooperative relaying and jamming scheme based on distributed beamforming to enhance the secrecy rate of a wireless channel in the presence of an eavesdropper. Specifically, we consider the scenario that a source node transmits messages to a destination with the help of multiple cooperative relays, where a relay might be compromised to become an eavesdropper as an inside attacker. Our joint relaying and jamming approach is to assign some relay nodes to act as jammers to interfere the eavesdropper, while the remaining ones continue relaying information to the destination. We propose a protocol to implement the joint cooperative relaying and jamming. Our protocol further considers the particular challenge brought by the inside attacker: it may know the jamming signal and can use it to remove the interference from the jammers. The issue of phase and frequency synchronization in the distributed beamforming is also taken into account. A mixed integer programming problem is formulated to maximize the secrecy rate with the proposed joint relaying and jamming, by which the optimal role assignment to a relay and the associated optimal power assignment can be solved. Numerical results are presented to demonstrate the efficiency of the proposed joint relaying and jamming in improving the secrecy rate, with comparison to existing approaches.
To improve physical (PHY) layer security of a wireless relay system in the presence of an eavesdropper, a two-phase cooperative relaying scheme is investigated in this paper. In phase I, the source transmits confidential message, simultaneously, it cooperates with the friendly jammers and destination to create jamming signal at the eavesdropper without affecting the forwarding relay which is preselected. In phase II, the forwarding relay retransmits the decoded signal, meanwhile, the particular relay cooperates with the friendly jammers to create jamming signal at the eavesdropper without affecting the destination. We focus on the investigation of optimal power allocation for maximizing achievable secrecy rate subject to a total power constraint. Optimal relay selection and suboptimal relay selection schemes are also proposed. It is shown that as the number of relays increases, both secrecy rate and the performance of suboptimal relay selection scheme improve significantly. Numerical results are presented to validate the derived analytical results and compare them to existing work.
In this paper, we investigate the physical layer security (PLS) of cooperative wireless-powered networks where a source transmits confidential information to a destination with the aid of wireless-powered intermediate nodes equipped with multiple antennas in the presence of a passive eavesdropper. We consider two generalized joint relay and jammer selection (GJRJS) frameworks based on the power splitting (PS) and time switching (TS) techniques, respectively. Specifically, the intermediate nodes which cannot decode the source signal successfully are selected to act as friendly jammers to transmit artificial noise, and the remaining nodes are exploited as relays to simultaneously forward the source signal through cooperative beamforming. We further propose two cooperative secure beamforming (CSB) schemes for the PS-based GJRJS (PS-GJRJS) and TS-based GJRJS (TS-GJRJS) frameworks, respectively. To be specific, we investigate the optimization of the beamforming vector of our selected relays for maximizing the secrecy rate of the source–destination transmission. A closed-form solution is derived under the assumption of available instantaneous channel state information (CSI) of the main link and statistical CSI of the wiretap link. In addition, we also illustrate that the pure relay selection (PRS) scheme is a special case of our GJRJS framework at high signal-to-noise ratios (SNRs). The numerical results show that the proposed CSB scheme achieves a higher secrecy rate than the traditional maximal ratio transmission (MRT) method for both the PS-GJRJS and TS-GJRJS frameworks. Additionally, the GJRJS framework outperforms the PRS as well as the joint best relay and jammer selection (JBRJS) methods in terms of secrecy rate.