Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics

Design of Diamond Photonic Devices for Spintronics

Thomas M. Babinec, Helmut Fedder, Jennifer T. Choy, İrfan Bulu, Marcus W. Doherty, Philip Hemmer, Jörg Wrachtrup, Marko Lončar

Published Jan 1, 2012• 3 citations
Publisher

Abstract

We design photonic devices for the purpose of optimizing the optically detected magnetic resonance – including overall spin polarization, read-out contrast, and detection sensitivity – with the Nitrogen-Vacancy center in diamond.
DOI
10.1364/cleo_at.2012.jw1i.6

Related papers

Photoelectrical imaging and coherent spin-state readout of single nitrogen-vacancy centers in diamond

Petr Siyushev, Miloš Nesládek, Emilie Bourgeois +7 more

Nitrogen-vacancy (NV) centers in diamond have become an important instrument for quantum sensing and quantum information science. However, the readout of NV spin state requires bulky optical setups, limiting fabrication of miniaturized compact devices for practical use. Here we realized photoelectrical detection of magnetic resonance as well as Rabi oscillations on a single-defect level. Furthermore, photoelectrical imaging of individual NV centers at room temperature was demonstrated, surpassing conventional optical readout methods by providing high imaging contrast and signal-to-noise ratio. These results pave the way toward fully integrated quantum diamond devices.

Science•Feb 14, 2019•194 citations

Optimization of optical control of nitrogen vacancy centers in solid diamond

Yuan-Yao Feng, Zhonghao Li, Yang Zhang +7 more

The nitrogen-vacancy (NV) centers in diamond have the advantages of stable triaxial structure, ultra-long electron spin coherence time and simple optical readout at room temperature. A nitrogen atom in the diamond crystal replaces a carbon atom and a vacancy is generated at the adjacent position, forming a point defect in the C3v space group structure. Its ground state and excited state are both spin triplet states. It is the key to achieving efficient preparation of optical initial state and extracting NV color center’s information in the researches of highly sensitive sensing magnetic detection, temperature detection, biological imaging, quantum computing, etc. However, there was no systematic study on relevant parameters of laser for high-concentration NV color center’s samples in previous experimental studies. Based on a high concentration diamond NV ensemble, we use pulsed optical detection magnetic resonance (ODMR) technology to systematically study the relationship among laser initial polarization time, information reading time and laser power, and the influence of laser incident polarization angle on the accuracy of sensing information. The effects of various laser parameters on the NV1 peak of ODMR on the [111] axis of the NVs of diamond are also investigated. The contrast of ODMR increases firstly with a sigmoid function and then decreases with an e-exponential function as the information reading time increases. The incident polarization angle of the laser is sinusoidal, with a period of 90°. According to the above experimental results, we finally choose the appropriate experimental parameters at 45.8 W/cm2 (300 μs of polarization, 700 ns, reading time, laser incident angle is 220°) for ODMR test. Compared with previous experimental parameters (polarization time was 50 us, read the time of 3000 ns, laser incident angle was 250°), the experimental results show that the contrast of ODMR increases from 2.1% to 4.6%, and the typical magnetic sensitivity is improved from 21.6 nT/Hz1/2 to 5.6 nT/Hz1/2. The optimization of the optical control of NVs in solid diamond is realized. The above results provide an effective support for the detection of high-sensitivity manipulation sensing based on high-concentration NV ensemble.

Acta Physica Sinica•Jan 1, 2020•8 citations

Design of diamond photonic devices for spintronics

Babinec, Fedder, Choy +5 more

Conference on Lasers and Electro-Optics•Jan 1, 2012•1 citation

Plasmon-enhanced sensitivity of spin-based sensors based on a diamond ensemble of nitrogen vacancy color centers

Hao Guo, Yulei Chen, Wu Da-Jin +6 more

A method for enhancement of the sensitivity of a spin sensor based on an ensemble of nitrogen vacancy (NV) color centers was demonstrated. Gold nanoparticles (NPs) were deposited on the bulk diamond, which had NV centers distributed on its surface. The experimental results demonstrate that, when using this simple method, plasmon enhancement of the deposited gold NPs produces an improvement of ∼10 times in the quantum efficiency and has also improved the signal-to-noise ratio by approximately ∼2.5 times. It was also shown that more electrons participated in the spin sensing process, leading to an improvement in the sensitivity of approximately seven times; this has been proved by Rabi oscillation and optical detection of magnetic resonance (ODMR) measurements. The proposed method has proved to be a more efficient way to design an ensemble of NV centers-based sensors; because the result increases in the number of NV centers, the quantum efficiency and the contrast ratio could greatly increase the device's sensitivity.

Optics Letters•Jan 17, 2017•28 citations

Diamond photonics and NV centers enabled by femtosecond laser writing

Belén Sotillo, John Patrick Hadden, Andrea Chiappini +4 more

Photonic circuits aligned to single NV centers are fabricated in diamond using femtosecond laser writing, to enable an integrated platform for the excitation and collection from these optically active spin defects.

SPIE Newsroom•Feb 7, 2017•0 citations

Optical fibers doped with nitrogen-vacancy submicron diamonds as magnetic sensors

Mariusz Mrózek, Adam Filipkowski, Grzegorz Stępniewski +4 more

Coupling NV-rich diamond with optical fibers opens the door to guiding quantum information via the NV center's spin state. While diamond-functionalized fiber sensors have shown excellent sensitivity to localized magnetic fields, their distributed sensing capabilities have been untapped. By embedding diamonds throughout the fiber's core, we create a sensor sensitive to magnetic fields along its entire length. This theoretically allows for distributed optical readout of small magnetic fields. However, challenges remain in pinpointing the source's location and understanding the performance of a sensor where the NV-center fluorescence is detected at a single endpoint, integrating signals from color centers in varying field and microwave conditions. We present a demonstration of distributed magnetic field sensing using a step-index fiber with NV-rich diamonds incorporated throughout the core. By collecting the NV fluorescence at the fiber's output and recording Optically Detected Magnetic Resonance (ODMR) spectra as the excitation source moves, we can map the magnetic field profile along the fiber, accurately locating the field source. This straightforward sensor design holds promise for applications such as magnetic field mapping of integrated circuits in photonics and spintronics.

Workshop on Specialty Optical Fibers and Their Applications (WSOF)•May 29, 2025•0 citations
Nitrogen-vacancy (NV) centers in diamond have become an important instrument for quantum sensing and quantum information science. However, the readout of NV spin state requires bulky optical setups, limiting fabrication of miniaturized compact devices for practical use. Here we realized photoelectrical detection of magnetic resonance as well as Rabi oscillations on a single-defect level. Furthermore, photoelectrical imaging of individual NV centers at room temperature was demonstrated, surpassing conventional optical readout methods by providing high imaging contrast and signal-to-noise ratio. These results pave the way toward fully integrated quantum diamond devices.
The nitrogen-vacancy (NV) centers in diamond have the advantages of stable triaxial structure, ultra-long electron spin coherence time and simple optical readout at room temperature. A nitrogen atom in the diamond crystal replaces a carbon atom and a vacancy is generated at the adjacent position, forming a point defect in the C3v space group structure. Its ground state and excited state are both spin triplet states. It is the key to achieving efficient preparation of optical initial state and extracting NV color center’s information in the researches of highly sensitive sensing magnetic detection, temperature detection, biological imaging, quantum computing, etc. However, there was no systematic study on relevant parameters of laser for high-concentration NV color center’s samples in previous experimental studies. Based on a high concentration diamond NV ensemble, we use pulsed optical detection magnetic resonance (ODMR) technology to systematically study the relationship among laser initial polarization time, information reading time and laser power, and the influence of laser incident polarization angle on the accuracy of sensing information. The effects of various laser parameters on the NV1 peak of ODMR on the [111] axis of the NVs of diamond are also investigated. The contrast of ODMR increases firstly with a sigmoid function and then decreases with an e-exponential function as the information reading time increases. The incident polarization angle of the laser is sinusoidal, with a period of 90°. According to the above experimental results, we finally choose the appropriate experimental parameters at 45.8 W/cm2 (300 μs of polarization, 700 ns, reading time, laser incident angle is 220°) for ODMR test. Compared with previous experimental parameters (polarization time was 50 us, read the time of 3000 ns, laser incident angle was 250°), the experimental results show that the contrast of ODMR increases from 2.1% to 4.6%, and the typical magnetic sensitivity is improved from 21.6 nT/Hz1/2 to 5.6 nT/Hz1/2. The optimization of the optical control of NVs in solid diamond is realized. The above results provide an effective support for the detection of high-sensitivity manipulation sensing based on high-concentration NV ensemble.
A method for enhancement of the sensitivity of a spin sensor based on an ensemble of nitrogen vacancy (NV) color centers was demonstrated. Gold nanoparticles (NPs) were deposited on the bulk diamond, which had NV centers distributed on its surface. The experimental results demonstrate that, when using this simple method, plasmon enhancement of the deposited gold NPs produces an improvement of ∼10 times in the quantum efficiency and has also improved the signal-to-noise ratio by approximately ∼2.5 times. It was also shown that more electrons participated in the spin sensing process, leading to an improvement in the sensitivity of approximately seven times; this has been proved by Rabi oscillation and optical detection of magnetic resonance (ODMR) measurements. The proposed method has proved to be a more efficient way to design an ensemble of NV centers-based sensors; because the result increases in the number of NV centers, the quantum efficiency and the contrast ratio could greatly increase the device's sensitivity.
Coupling NV-rich diamond with optical fibers opens the door to guiding quantum information via the NV center's spin state. While diamond-functionalized fiber sensors have shown excellent sensitivity to localized magnetic fields, their distributed sensing capabilities have been untapped. By embedding diamonds throughout the fiber's core, we create a sensor sensitive to magnetic fields along its entire length. This theoretically allows for distributed optical readout of small magnetic fields. However, challenges remain in pinpointing the source's location and understanding the performance of a sensor where the NV-center fluorescence is detected at a single endpoint, integrating signals from color centers in varying field and microwave conditions. We present a demonstration of distributed magnetic field sensing using a step-index fiber with NV-rich diamonds incorporated throughout the core. By collecting the NV fluorescence at the fiber's output and recording Optically Detected Magnetic Resonance (ODMR) spectra as the excitation source moves, we can map the magnetic field profile along the fiber, accurately locating the field source. This straightforward sensor design holds promise for applications such as magnetic field mapping of integrated circuits in photonics and spintronics.