Superconductor Science and Technology

Single flux quantum digital devices

V. P. Koshelets

Published Nov 1, 1991• 5 citations

Abstract

A new generation of the Josephson digital circuits-rapid single flux quantum (RSFQ) devices-based on overdamped externally shunted high quality Nb-AlO x -Nb tunnel junctions have been designed, fabricated and experimentally investigated. All-refractory material 11-layer 5 mu m integrated technology has been successfully employed for the preparation of the RSFQ microcircuits. The T flip-flop has been demonstrated to operate properly up to clock frequencies of 100 GHz at 25% margins. The proper operation of the buffer stage for a one-directional SFQ pulse transmission at clock frequencies up to 125 GHz has been achieved. The possibilities to convert the information from the usual DC form to SFQ and vice versa have been demonstrated. An output signal in an SFQ/DC converter as high as 220 mu V has been measured. A new counter type A/D converter which includes a comparator and reversible binary counter with DC outputs has been fabricated and tested. The proposed ADC seems to be very promising for high-accuracy measurement of medium-bandwidth signals. The possibilities of creating a number of SFQ devices with outstanding parameters are discussed.

DOI: 10.1088/0953-2048/4/11/001

Related papers

Experimental realization of a resistive single flux quantum logic circuit

V. P. Koshelets, K. K. Likharev, V. V. Migulin +5 more

An integrated circuit including all basic components of the recently suggested Resistive Single Flux Quantum (RSFQ) logic family has been designed, fabricated and tested successfully. The circuit includes a generator of periodic SFQ pulses, four buffer/amplifier stages for splitting, channeling and regeneration of the pulses, a detector/load stage, and universal RSFQ logic gate (here performing the NOT function). The 10μm design rule circuit employs 13 active Nb - Al2O3- Nb Josephson junctions with the critical current density ∼ 0.5 kA/cm2. externally shunted by Mo resistors with R 1 Ohm. The shunting provided critical damping of the junctions (\beta_{c}\lsim 1) and reasonable (\sim 500 \muV) IcR product. The circuit operation has been tested by measurement of dc voltages\bar{V}_{i}across various Josephson junctions as functions of the dc current through the pulse generator. Correct and stable operation of the circuit for the clock frequencies from 0 to ∼30 GHz has been demonstrated.

IEEE Transactions on MagneticsMar 1, 198739 citations

New RSFQ circuits (Josephson junction digital devices)

Stanislav V. Polonsky, Vasili K. Semenov, P. Bunyk +7 more

Several novel circuits of the rapid single-flux-quantum (RSFQ) family of Josephson-junction digital devices have been designed, fabricated using a 2.5- mu m 1000-A/cm/sup 2/ Nb trilayer technology, and tested at low frequencies. Numerical simulation and measurements have shown that these circuits have considerably wider parameter margins, due to application of several novel design methods. The authors have also carried out an experiment to measure the rate of errors in a simple RSFQ circuit including an inverter, confluence buffer, and Josephson transmission line. Near the middle of the parameter window at 4.2 K, the error probability was definitely lower than 3*10/sup -15/ per logic operation, despite experimentation with rudimentary shielding and filtering.>

IEEE Transactions on Applied SuperconductivityMar 1, 1993133 citations

High-speed single-flux-quantum circuit using planarized niobium-trilayer Josephson junction technology

P. Bunyk, A. Oliva, Vasili K. Semenov +5 more

A simple test circuit of the rapid single-flux-quantum (RSFQ) logic family has been implemented in a planarized all-refractory technology using only two superconducting layers and small Nb/AlOx/Nb Josephson junctions (nominally 1.5×1.5 μm2) with critical current density jc≊6 kA/cm2. A special layout design of the integrated circuit (including a SFQ pulse generator, Josephson transmission line, and T flip–flop) was used to reduce 3D inductances resulting from absence of the ground plane. For samples with various junction parameters, the maximum frequency of the SFQ pulse train, which could be divided by 2 by the flip–flop, ranged from 200 to 370 GHz.

Applied Physics LettersJan 30, 199565 citations

Design of SFQ-counting analog-to-digital converter

J.C. Lin, Vasili K. Semenov, Konstantin K. Likharev

We describe the design of an oversampling single-flux-counting analog-to-digital converter with the estimated bandwidth of a few tens of MHz, based on Rapid Single-Flux-Quantum (RSFQ) devices. It consists of an input analog circuit, high-speed quantizer with an original analog/digital negative feedback loop, decimation (comb) filter, and supporting subsystems including clock distribution circuits, quantization signal conditioner, and output drivers. We have applied a new approach, the 'symmetrizing' negative feedback, to free the quantizer from the intrinsic hysteresis without dynamic range sacrifice. The 16-bit version of the system comprises about 1,500 Josephson junctions and consumes 1.2 mW of DC power, when implemented using Nb-trilayer technology with 1 kA/cm/sup 2/, 3.5 /spl mu/m Josephson junctions. All subsystems of the converter have been successfully tested and testing of the system as a whole is in progress.>

IEEE Transactions on Applied SuperconductivityJun 1, 199551 citations

Prospect of single flux quantum logic in superconducting digital electronics

J.H. Kang, John X. Przybysz, Donald L. Miller +2 more

This paper presents a study on the merits of single flux quantum (SFQ) logic in superconducting digital electronics. With no requirements for an external RF clock source, the speed of SFQ logic circuits can exceed 100 GHz, orders of magnitude higher than latching logic circuits. Use of overdamped junctions in SFQ circuits makes this logic available for already developed high-Tc junctions. Simulations show the operation of SFQ circuits at above 10 GHz with the junctions having characteristics similar to those of YBa2Cu3O7-x/Au/YBa2Cu3O7-x planar junctions. A similar concept is applied to NbN circuits operable above 10 K. A flip-flop counter using NbN junctions with Vm (1.5 mV)=3 mV and Delta =1.9 mV to model 12 K operation has been successfully simulated up to 5 GHz. Operating margins of only 26% on MVTL shift register were obtained by simulations, which is comparable to the margins for SFQ logic circuits. A counting SFQ analogue-to-digital converter can be improved by using an output buffered quantizer.

Superconductor Science and TechnologyNov 1, 19915 citations

Ultrafast Superconducting Digital Circuits for Analysis and Processing of Microwave Signals

Pascal Febvre, Torsten Reich, Thomas Ortlepp +1 more

Rapid-Single-Flux-Quantum (RSFQ) digital circuits based on shunted Josephson junctions have been shown to be able to digitally process signals up to several hundreds GHz. The principle of operation is based on the generation, transport and processing of picosecond voltage pulses of 2.07 mV.ps quantized area, which corresponds to one quantum flux h/2e. Operation of RSFQ circuits can be performed with clock frequencies of the order of 20 to 50 GHz with present technology. We will present current developments and experimental results obtained so far, based on circuits developed in the JeSEF RSFQ process of IPHT Jena, using a 1 kA/cm2 shunted Nb/Al-AlOx/Nb junctions. Some particular potential applications for space will be emphasized

May 1, 20060 citations