Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Superconductor Science and Technology

Prospect of single flux quantum logic in superconducting digital electronics

J.H. Kang, John X. Przybysz, Donald L. Miller, D.L. Meier, Martin G. Forrester

Published Nov 1, 1991• 5 citations
Publisher

Abstract

This paper presents a study on the merits of single flux quantum (SFQ) logic in superconducting digital electronics. With no requirements for an external RF clock source, the speed of SFQ logic circuits can exceed 100 GHz, orders of magnitude higher than latching logic circuits. Use of overdamped junctions in SFQ circuits makes this logic available for already developed high-Tc junctions. Simulations show the operation of SFQ circuits at above 10 GHz with the junctions having characteristics similar to those of YBa2Cu3O7-x/Au/YBa2Cu3O7-x planar junctions. A similar concept is applied to NbN circuits operable above 10 K. A flip-flop counter using NbN junctions with Vm (1.5 mV)=3 mV and Delta =1.9 mV to model 12 K operation has been successfully simulated up to 5 GHz. Operating margins of only 26% on MVTL shift register were obtained by simulations, which is comparable to the margins for SFQ logic circuits. A counting SFQ analogue-to-digital converter can be improved by using an output buffered quantizer.

DOI
10.1088/0953-2048/4/11/006

Related papers

Single flux quantum digital devices

V. P. Koshelets

A new generation of the Josephson digital circuits-rapid single flux quantum (RSFQ) devices-based on overdamped externally shunted high quality Nb-AlO x -Nb tunnel junctions have been designed, fabricated and experimentally investigated. All-refractory material 11-layer 5 mu m integrated technology has been successfully employed for the preparation of the RSFQ microcircuits. The T flip-flop has been demonstrated to operate properly up to clock frequencies of 100 GHz at 25% margins. The proper operation of the buffer stage for a one-directional SFQ pulse transmission at clock frequencies up to 125 GHz has been achieved. The possibilities to convert the information from the usual DC form to SFQ and vice versa have been demonstrated. An output signal in an SFQ/DC converter as high as 220 mu V has been measured. A new counter type A/D converter which includes a comparator and reversible binary counter with DC outputs has been fabricated and tested. The proposed ADC seems to be very promising for high-accuracy measurement of medium-bandwidth signals. The possibilities of creating a number of SFQ devices with outstanding parameters are discussed.

Superconductor Science and Technology•Nov 1, 1991•5 citations

Superconducting digital circuits with low-T/sub c/ and high-T/sub c/ materials

J.H. Kang, John X. Przybysz, Donald L. Miller +1 more

The authors argue that superconducting digital electronics is the future trend for high-speed and low-power applications. Low-T/sub c/ technology based on stable Nb-AlO/sub x/-Nb tunneling junctions has been successful in constructing most of the digital circuit logic elements. A four-stage shift register constructed with latching logic operated up to 4 GHz with a power consumption of about 60 mu W per gate. A 12-b analog-digital coverter constructed with a single flux quantum (SFQ) logic showed proper operation with the total power dissipated being only about 100 mu W. Fabrication of Josephson tunneling junctions with high-T/sub c/ materials has been tougher than with low-T/sub c/ materials. However, recently developed very high speed rapid single flux quantum (RSFQ) logic circuits can be applied to weak link type junctions fabricated with YBa/sub 2/Cu/sub 3/O/sub 7-x/ films. Simulations of the various circuits with weak link type junctions, e.g., shift registers, analog-digital converters, etc., show fast operation and reasonable margins. Applications of similar concepts can be applied to NbN circuits operating at above 10 K.>

IEEE/Cornell Conference on Advanced Concepts in High Speed Semiconductor Devices and Circuits•Dec 9, 2002•0 citations

Metastability in Superconducting Single Flux Quantum (SFQ) Logic

Gourav Datta, Yunkun Lin, Bo Zhang +1 more

Superconducting digital electronics, especially Single Flux Quantum (SFQ), has emerged as a promising beyond-CMOS technology with Josephson junctions (JJ) as the active device. It has the potential to meet the booming demands of lower power consumption and higher operation speeds in the electronics industry and future exascale supercomputing systems. Despite these promises, scaling SFQ circuits remains a serious challenge that motivates the support of multiple SFQ clock domains. Towards this end, this paper analyzes the impact of setup time violations and metastability in SFQ circuits comparing the derived analytical models to their CMOS counterparts. It also proposes new techniques to reduce the average latency in metastability-tolerant SFQ synchronizers, and evaluates their effects on the layout and critical margin of the design. It further extends the proposed model to estimate the Mean Time Between Failure (MTBF) of flip-flop-based synchronizers and shows that their MTBF with the current feature sizes is unaffected by noise, similar to CMOS. Finally, it curve fits this model to simulations using the state-of-the-art SFQ5ee process and shows that a two-flop SFQ synchronizer with a clock frequency of 25 GHz has an estimated MTBF of ~106years.

IEEE Transactions on Circuits and Systems I Regular Papers•Feb 15, 2021•6 citations

Superconductive single-flux quantum technology

Oleg A. Mukhanov

Key digital circuits for signal processing with tens of gigahertz speed and a few microwatts power dissipation have been recently demonstrated using a simple, 2 /spl mu/m linewidth process. These are the fastest digital circuits reported to date. These circuits use novel rapid single flux quantum (RSFQ) technology that takes advantage of the fundamental properties of superconductivity. In this technology, data and clock are picosecond-long quantized voltage pulses corresponding to the transfer of single magnetic flux quanta, /spl Phisub 0/=h/2e=2 mVps. These SFQ pulses are regenerated at each gate and are processed by circuits comprised of overdamped Josephson junctions interconnected via microstrip inductances. The inherent internal memory of all RSFQ gates (primarily flip-flops), combined with high switching speed, makes serial, bit-pipelined circuit design advantageous. This paper presents experiments in RSFQ digital circuits, including an N/spl times/8b serial multiplier, and on-chip test systems based on RSFQ shift registers and on SFQ samplers. They enable test and study of RSFQ circuits at full GHz speed while communicating with semiconductor electronics at low speed.>

Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference•Dec 17, 2002•8 citations

Superconducting digital electronics

Shuichi Tahara, Shinichi Yorozu, Y. Kameda +5 more

Superconducting devices have intrinsically superior characteristics to those of semiconductor devices. Presently, we can fabricate more than twenty thousand junctions on one chip using niobium technology. We have demonstrated the operation of a network system with a superconducting interconnection chip using voltage-state logic. Single flux quantum devices are promising for future superconducting applications because the clock frequency of SFQ logic is higher than that of voltage-state. We have proposed a high-end switch based on hybrid architecture using optical devices, semiconductors and SFQ devices. To demonstrate the high-speed operation of SFQ circuits, we developed an arbiter circuit that uses SFQ components and the arbiter circuit operates at 60 GHz. We also have developed a high Tc superconducting (HTS) SFQ sampler system for observing ultra-fast signal waveforms. In addition, we will discuss the prospects of future superconducting devices based on the fabrication technologies we developed.

IEEE Transactions on Applied Superconductivity•Mar 1, 2001•24 citations

Superconducting Digital Electronics Based on Single Flux Quantum

Hisao Hayakawa

Single flux quantum (SFQ) logic circuits, in which a single flux quantum is used for an information carrier, have a possibility to open a new digital system operated with over 100 GHz clock frequencies at extremely low power dissipations. Recently, much progress in basic technologies for designing SFQ circuits and operating circuits with high speeds has been done. By taking advancements in these designing tools, circuits including more than several thousands junctions easily operated with the clock frequency of more than several tens GHz. Applications of SFQ circuits such as high performance computers, high end router and high end servers are being developed in the world taking advantages of the high through-put nature and the low power dissipation of the SFQ logic.

Chinese Journal of Physics•Aug 1, 2004•0 citations
This paper presents a study on the merits of single flux quantum (SFQ) logic in superconducting digital electronics. With no requirements for an external RF clock source, the speed of SFQ logic circuits can exceed 100 GHz, orders of magnitude higher than latching logic circuits. Use of overdamped junctions in SFQ circuits makes this logic available for already developed high-Tc junctions. Simulations show the operation of SFQ circuits at above 10 GHz with the junctions having characteristics similar to those of YBa2Cu3O7-x/Au/YBa2Cu3O7-x planar junctions. A similar concept is applied to NbN circuits operable above 10 K. A flip-flop counter using NbN junctions with Vm (1.5 mV)=3 mV and Delta =1.9 mV to model 12 K operation has been successfully simulated up to 5 GHz. Operating margins of only 26% on MVTL shift register were obtained by simulations, which is comparable to the margins for SFQ logic circuits. A counting SFQ analogue-to-digital converter can be improved by using an output buffered quantizer.
A new generation of the Josephson digital circuits-rapid single flux quantum (RSFQ) devices-based on overdamped externally shunted high quality Nb-AlO x -Nb tunnel junctions have been designed, fabricated and experimentally investigated. All-refractory material 11-layer 5 mu m integrated technology has been successfully employed for the preparation of the RSFQ microcircuits. The T flip-flop has been demonstrated to operate properly up to clock frequencies of 100 GHz at 25% margins. The proper operation of the buffer stage for a one-directional SFQ pulse transmission at clock frequencies up to 125 GHz has been achieved. The possibilities to convert the information from the usual DC form to SFQ and vice versa have been demonstrated. An output signal in an SFQ/DC converter as high as 220 mu V has been measured. A new counter type A/D converter which includes a comparator and reversible binary counter with DC outputs has been fabricated and tested. The proposed ADC seems to be very promising for high-accuracy measurement of medium-bandwidth signals. The possibilities of creating a number of SFQ devices with outstanding parameters are discussed.
The authors argue that superconducting digital electronics is the future trend for high-speed and low-power applications. Low-T/sub c/ technology based on stable Nb-AlO/sub x/-Nb tunneling junctions has been successful in constructing most of the digital circuit logic elements. A four-stage shift register constructed with latching logic operated up to 4 GHz with a power consumption of about 60 mu W per gate. A 12-b analog-digital coverter constructed with a single flux quantum (SFQ) logic showed proper operation with the total power dissipated being only about 100 mu W. Fabrication of Josephson tunneling junctions with high-T/sub c/ materials has been tougher than with low-T/sub c/ materials. However, recently developed very high speed rapid single flux quantum (RSFQ) logic circuits can be applied to weak link type junctions fabricated with YBa/sub 2/Cu/sub 3/O/sub 7-x/ films. Simulations of the various circuits with weak link type junctions, e.g., shift registers, analog-digital converters, etc., show fast operation and reasonable margins. Applications of similar concepts can be applied to NbN circuits operating at above 10 K.>
Superconducting digital electronics, especially Single Flux Quantum (SFQ), has emerged as a promising beyond-CMOS technology with Josephson junctions (JJ) as the active device. It has the potential to meet the booming demands of lower power consumption and higher operation speeds in the electronics industry and future exascale supercomputing systems. Despite these promises, scaling SFQ circuits remains a serious challenge that motivates the support of multiple SFQ clock domains. Towards this end, this paper analyzes the impact of setup time violations and metastability in SFQ circuits comparing the derived analytical models to their CMOS counterparts. It also proposes new techniques to reduce the average latency in metastability-tolerant SFQ synchronizers, and evaluates their effects on the layout and critical margin of the design. It further extends the proposed model to estimate the Mean Time Between Failure (MTBF) of flip-flop-based synchronizers and shows that their MTBF with the current feature sizes is unaffected by noise, similar to CMOS. Finally, it curve fits this model to simulations using the state-of-the-art SFQ5ee process and shows that a two-flop SFQ synchronizer with a clock frequency of 25 GHz has an estimated MTBF of ~106years.
Key digital circuits for signal processing with tens of gigahertz speed and a few microwatts power dissipation have been recently demonstrated using a simple, 2 /spl mu/m linewidth process. These are the fastest digital circuits reported to date. These circuits use novel rapid single flux quantum (RSFQ) technology that takes advantage of the fundamental properties of superconductivity. In this technology, data and clock are picosecond-long quantized voltage pulses corresponding to the transfer of single magnetic flux quanta, /spl Phisub 0/=h/2e=2 mVps. These SFQ pulses are regenerated at each gate and are processed by circuits comprised of overdamped Josephson junctions interconnected via microstrip inductances. The inherent internal memory of all RSFQ gates (primarily flip-flops), combined with high switching speed, makes serial, bit-pipelined circuit design advantageous. This paper presents experiments in RSFQ digital circuits, including an N/spl times/8b serial multiplier, and on-chip test systems based on RSFQ shift registers and on SFQ samplers. They enable test and study of RSFQ circuits at full GHz speed while communicating with semiconductor electronics at low speed.>
Superconducting devices have intrinsically superior characteristics to those of semiconductor devices. Presently, we can fabricate more than twenty thousand junctions on one chip using niobium technology. We have demonstrated the operation of a network system with a superconducting interconnection chip using voltage-state logic. Single flux quantum devices are promising for future superconducting applications because the clock frequency of SFQ logic is higher than that of voltage-state. We have proposed a high-end switch based on hybrid architecture using optical devices, semiconductors and SFQ devices. To demonstrate the high-speed operation of SFQ circuits, we developed an arbiter circuit that uses SFQ components and the arbiter circuit operates at 60 GHz. We also have developed a high Tc superconducting (HTS) SFQ sampler system for observing ultra-fast signal waveforms. In addition, we will discuss the prospects of future superconducting devices based on the fabrication technologies we developed.
Single flux quantum (SFQ) logic circuits, in which a single flux quantum is used for an information carrier, have a possibility to open a new digital system operated with over 100 GHz clock frequencies at extremely low power dissipations. Recently, much progress in basic technologies for designing SFQ circuits and operating circuits with high speeds has been done. By taking advancements in these designing tools, circuits including more than several thousands junctions easily operated with the clock frequency of more than several tens GHz. Applications of SFQ circuits such as high performance computers, high end router and high end servers are being developed in the world taking advantages of the high through-put nature and the low power dissipation of the SFQ logic.