Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

New RSFQ circuits (Josephson junction digital devices)

Stanislav V. Polonsky, Vasili K. Semenov, P. Bunyk, Alex F. Kirichenko, Anna Kidiyarova-Shevchenko, Oleg A. Mukhanov, P.N. Shevchenko, D.F. Schneider, Dmitry Y. Zinoviev, Konstantin K. Likharev

Published Mar 1, 1993• 133 citations
Publisher

Abstract

Several novel circuits of the rapid single-flux-quantum (RSFQ) family of Josephson-junction digital devices have been designed, fabricated using a 2.5- mu m 1000-A/cm/sup 2/ Nb trilayer technology, and tested at low frequencies. Numerical simulation and measurements have shown that these circuits have considerably wider parameter margins, due to application of several novel design methods. The authors have also carried out an experiment to measure the rate of errors in a simple RSFQ circuit including an inverter, confluence buffer, and Josephson transmission line. Near the middle of the parameter window at 4.2 K, the error probability was definitely lower than 3*10/sup -15/ per logic operation, despite experimentation with rudimentary shielding and filtering.>

DOI
10.1109/77.233530

Related papers

Single flux quantum digital devices

V. P. Koshelets

A new generation of the Josephson digital circuits-rapid single flux quantum (RSFQ) devices-based on overdamped externally shunted high quality Nb-AlO x -Nb tunnel junctions have been designed, fabricated and experimentally investigated. All-refractory material 11-layer 5 mu m integrated technology has been successfully employed for the preparation of the RSFQ microcircuits. The T flip-flop has been demonstrated to operate properly up to clock frequencies of 100 GHz at 25% margins. The proper operation of the buffer stage for a one-directional SFQ pulse transmission at clock frequencies up to 125 GHz has been achieved. The possibilities to convert the information from the usual DC form to SFQ and vice versa have been demonstrated. An output signal in an SFQ/DC converter as high as 220 mu V has been measured. A new counter type A/D converter which includes a comparator and reversible binary counter with DC outputs has been fabricated and tested. The proposed ADC seems to be very promising for high-accuracy measurement of medium-bandwidth signals. The possibilities of creating a number of SFQ devices with outstanding parameters are discussed.

Superconductor Science and Technology•Nov 1, 1991•5 citations

High-speed single-flux-quantum circuit using planarized niobium-trilayer Josephson junction technology

P. Bunyk, A. Oliva, Vasili K. Semenov +5 more

A simple test circuit of the rapid single-flux-quantum (RSFQ) logic family has been implemented in a planarized all-refractory technology using only two superconducting layers and small Nb/AlOx/Nb Josephson junctions (nominally 1.5×1.5 μm2) with critical current density jc≊6 kA/cm2. A special layout design of the integrated circuit (including a SFQ pulse generator, Josephson transmission line, and T flip–flop) was used to reduce 3D inductances resulting from absence of the ground plane. For samples with various junction parameters, the maximum frequency of the SFQ pulse train, which could be divided by 2 by the flip–flop, ranged from 200 to 370 GHz.

Applied Physics Letters•Jan 30, 1995•65 citations

Experimental study of the RSFQ logic elements

V. K. Kaplunenko, M. Khabipov, V. P. Koshelets +5 more

New elements of the rapid single flux quantum (RSFQ) logic family have been designed, fabricated, and tested. All-Nb 14-layer 5 mu m technology using externally shunted tunnel junctions with j/sub c/=500 A/cm/sup 2/, I/sub c/R/sub s/=300 mu V, and B/sub c/>

IEEE Transactions on Magnetics•Mar 1, 1989•84 citations

Ultimate performance of the RSFQ logic circuits

Oleg A. Mukhanov, Vasili K. Semenov, Konstantin K. Likharev

A new family of dc-powered Josephson junction digital devices, the Rapid Single Flux Quantum (RSFQ) logic, is described. The devices use overdamped Josephson junctions and two-junction interferometers to store, pass and process the digital information presented in form of single flux quanta. We have carried out extensive numerical simulation of the dynamics of the RSFQ logic gates and of some more complex circuits including serial full adder and reversible shift register, within the standard microscopic-theory ("Werthamer") description of Josephson junctions. The minimum clock cycles of the basic RSFQ circuits turn out to be as small as 2.5 ps. The most promising ways to use the RSFQ logic circuits at the present stage of development of the Josephson junction digital technology are discussed.

IEEE Transactions on Magnetics•Mar 1, 1987•143 citations

High-frequency performance of RSFQ circuits realized in SINIS technology

M. Khabipov, D Balashov, F.-I. Buchholz +1 more

The paper presents the determination of the high-frequency performance of Rapid Single Flux Quantum (RSFQ) circuits fabricated in superconductor-insulator-normal metal-insulator-superconductor (SINIS) technology. Circuits of different designs have been realized and were experimentally investigated, including specially designed T flip-flop (TFF) structures and circuits consisting of a switch terminated in Josephson transmission lines. For TFF circuits, the operational functionality was investigated in the frequency range from dc up to nearly 200 GHz. Two frequency domains were found. In the first domain, ranging up to frequencies of 80 GHz (f/sub C//spl cong/Y/sub C///spl Phi//sub 0/), correct digital operation of the device was ascertained. Beyond this range a second domain was found, ranging to nearly 200 GHz, for which quasi-analog frequency dividing is assumed. The bias current margins are /spl plusmn/30% at 40 GHz and /spl plusmn/15% between 130 GHz and 200 GHz. For circuits consisting of a switch, the operational functionality was proved in the frequency range from dc up to 50 GHz, with bias current margins of more than /spl plusmn/20%. The critical current density of the circuits is j/sub C//spl cong/750 A/cm/sup 2/. The smallest junction area is about A=12 /spl mu/m/sup 2/, and the characteristic voltage is V/sub C/=170 /spl mu/V.

IEEE Transactions on Applied Superconductivity•Mar 1, 2001•7 citations

Design Improvement and Measurement of a Rapid Single Flux Quantum Confluence Buffer

Seunghun Baek, Jinyoung Kim, Sehoon Kim +4 more

Rapid Single flux quantum (RSFQ) confluence buffer is widely used in complex superconductive digital circuits. In this work, we have improved the currently used confluence buffer and obtained a more soundly designed confluence buffer. In simulations, improvements in the bias margins of 11 % and the global margins of 10%, compared to the previously used confluence buffer, were achieved. Global margins are very important in estimating a process error range allowed in fabrications. We used two circuit simulation tools, WRspice and Julia, to design and optimize the confluence buffer. We used Xic to obtain a mask layout. We fabricated the improved circuits by using Nb technology. The test results at low frequency showed that the improved confluence buffer operated correctly and had a very wide main bias margin of +/-43% enhanced from +/-26% of the previously used confluence buffer.

Progress in Superconductivity and Cryogenics•Jan 1, 2004•0 citations
Several novel circuits of the rapid single-flux-quantum (RSFQ) family of Josephson-junction digital devices have been designed, fabricated using a 2.5- mu m 1000-A/cm/sup 2/ Nb trilayer technology, and tested at low frequencies. Numerical simulation and measurements have shown that these circuits have considerably wider parameter margins, due to application of several novel design methods. The authors have also carried out an experiment to measure the rate of errors in a simple RSFQ circuit including an inverter, confluence buffer, and Josephson transmission line. Near the middle of the parameter window at 4.2 K, the error probability was definitely lower than 3*10/sup -15/ per logic operation, despite experimentation with rudimentary shielding and filtering.>
A new generation of the Josephson digital circuits-rapid single flux quantum (RSFQ) devices-based on overdamped externally shunted high quality Nb-AlO x -Nb tunnel junctions have been designed, fabricated and experimentally investigated. All-refractory material 11-layer 5 mu m integrated technology has been successfully employed for the preparation of the RSFQ microcircuits. The T flip-flop has been demonstrated to operate properly up to clock frequencies of 100 GHz at 25% margins. The proper operation of the buffer stage for a one-directional SFQ pulse transmission at clock frequencies up to 125 GHz has been achieved. The possibilities to convert the information from the usual DC form to SFQ and vice versa have been demonstrated. An output signal in an SFQ/DC converter as high as 220 mu V has been measured. A new counter type A/D converter which includes a comparator and reversible binary counter with DC outputs has been fabricated and tested. The proposed ADC seems to be very promising for high-accuracy measurement of medium-bandwidth signals. The possibilities of creating a number of SFQ devices with outstanding parameters are discussed.
A simple test circuit of the rapid single-flux-quantum (RSFQ) logic family has been implemented in a planarized all-refractory technology using only two superconducting layers and small Nb/AlOx/Nb Josephson junctions (nominally 1.5×1.5 μm2) with critical current density jc≊6 kA/cm2. A special layout design of the integrated circuit (including a SFQ pulse generator, Josephson transmission line, and T flip–flop) was used to reduce 3D inductances resulting from absence of the ground plane. For samples with various junction parameters, the maximum frequency of the SFQ pulse train, which could be divided by 2 by the flip–flop, ranged from 200 to 370 GHz.
A new family of dc-powered Josephson junction digital devices, the Rapid Single Flux Quantum (RSFQ) logic, is described. The devices use overdamped Josephson junctions and two-junction interferometers to store, pass and process the digital information presented in form of single flux quanta. We have carried out extensive numerical simulation of the dynamics of the RSFQ logic gates and of some more complex circuits including serial full adder and reversible shift register, within the standard microscopic-theory ("Werthamer") description of Josephson junctions. The minimum clock cycles of the basic RSFQ circuits turn out to be as small as 2.5 ps. The most promising ways to use the RSFQ logic circuits at the present stage of development of the Josephson junction digital technology are discussed.
The paper presents the determination of the high-frequency performance of Rapid Single Flux Quantum (RSFQ) circuits fabricated in superconductor-insulator-normal metal-insulator-superconductor (SINIS) technology. Circuits of different designs have been realized and were experimentally investigated, including specially designed T flip-flop (TFF) structures and circuits consisting of a switch terminated in Josephson transmission lines. For TFF circuits, the operational functionality was investigated in the frequency range from dc up to nearly 200 GHz. Two frequency domains were found. In the first domain, ranging up to frequencies of 80 GHz (f/sub C//spl cong/Y/sub C///spl Phi//sub 0/), correct digital operation of the device was ascertained. Beyond this range a second domain was found, ranging to nearly 200 GHz, for which quasi-analog frequency dividing is assumed. The bias current margins are /spl plusmn/30% at 40 GHz and /spl plusmn/15% between 130 GHz and 200 GHz. For circuits consisting of a switch, the operational functionality was proved in the frequency range from dc up to 50 GHz, with bias current margins of more than /spl plusmn/20%. The critical current density of the circuits is j/sub C//spl cong/750 A/cm/sup 2/. The smallest junction area is about A=12 /spl mu/m/sup 2/, and the characteristic voltage is V/sub C/=170 /spl mu/V.
Rapid Single flux quantum (RSFQ) confluence buffer is widely used in complex superconductive digital circuits. In this work, we have improved the currently used confluence buffer and obtained a more soundly designed confluence buffer. In simulations, improvements in the bias margins of 11 % and the global margins of 10%, compared to the previously used confluence buffer, were achieved. Global margins are very important in estimating a process error range allowed in fabrications. We used two circuit simulation tools, WRspice and Julia, to design and optimize the confluence buffer. We used Xic to obtain a mask layout. We fabricated the improved circuits by using Nb technology. The test results at low frequency showed that the improved confluence buffer operated correctly and had a very wide main bias margin of +/-43% enhanced from +/-26% of the previously used confluence buffer.