Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Ultrafast Superconducting Digital Circuits for Analysis and Processing of Microwave Signals

Pascal Febvre, Torsten Reich, Thomas Ortlepp, Friedrich Uhlmann

Published May 1, 2006• 0 citations
OpenAlex

Abstract

Rapid-Single-Flux-Quantum (RSFQ) digital circuits based on shunted Josephson junctions have been shown to be able to digitally process signals up to several hundreds GHz. The principle of operation is based on the generation, transport and processing of picosecond voltage pulses of 2.07 mV.ps quantized area, which corresponds to one quantum flux h/2e. Operation of RSFQ circuits can be performed with clock frequencies of the order of 20 to 50 GHz with present technology. We will present current developments and experimental results obtained so far, based on circuits developed in the JeSEF RSFQ process of IPHT Jena, using a 1 kA/cm2 shunted Nb/Al-AlOx/Nb junctions. Some particular potential applications for space will be emphasized

Related papers

Superconductive Microwave Single-Flux-Quantum Digital Circuits and Corresponding Opto-Electronic Interfaces: On-Going Studies and First Experimental Results

Pascal Febvre, Siham Badi, Torsten Reich +2 more

Superconductive microwave rapid single-flux-quantum (RSFQ) digital circuits offer the possibility to digitally process signals in the frequency range of tens of GHz. An example of application to bring the advantages of this technology deals with digital SQUIDs, used for sensitive magnetometry with a broadband dynamics connected to a slew-rate in the GHz range. First recently obtained results of digital SQUID operation, based on Nb/Al-Al2O3/Nb shunted Josephson junctions, are presented in this article. In order to obtain the best performance of RSFQ circuits, and especially to push their speed at its limits, a precise diagnostic of such circuits is needed. We are developing a time-resolved diagnostic system based on sensitive photoconductive switches to sample the weak signals coming out of RSFQ circuits at cryogenic temperature. This system includes two different sorts of opto-RSFQ interfaces, based on superconducting and semiconducting materials, respectively. Some simulation results in the microwave range, along with measurements giving the potentialities of different photoswitches are presented.

•Jul 13, 2005•0 citations

Asynchronous circuits and systems in superconducting RSFQ digital technology

Z.J. Deng, Nobuyuki Yoshikawa, J. Tierno +2 more

Superconductive Rapid Single Flux Quantum (RSFQ) logic and memory, in which ones and zeros are represented by the presence or absence within a timing window of quantized picosecond voltage pulse (/spl int/v(t)dt=h/2e=2.07 mV/spl middot/ps), corresponding to one SFQ, can be integrated into a digital computing system with an operating rate of several tens of GHz, based on the present Nb Josephson junction integrated circuit technology. It is the most promising technology beyond semiconductor transistors for low-power high-end computation. However, as the operating speed of circuits and systems increase, timing uncertainty from fabrication process variations makes global synchronization very hard. In this paper, we present a globally asynchronous, locally synchronous timing methodology for RSFQ digital design, which can solve the global synchronization problem. We also demonstrate the recent experimental results of some asynchronous circuits and systems implemented in RSFQ technology. Several key components such as a self-timed shift register, a self-timed demultiplexor, a Muller-C element, a completion detector, and a clock generator have been designed and tested. High speed operation has been confirmed up to 20 Gb/s for a prototype data buffer system, which consists two self-timed shift registers and an on-chip 5-38 GHz clock generator.

IEEE International Symposium on Asynchronous Circuits and Systems (ASYNC)•Nov 27, 2002•7 citations

Superconducting RSFQ logic: Towards 100GHz digital electronics

Vratislav Michal, Emanuele Baggetta, Mario Aurino +2 more

The Rapid Single-Flux-Quantum logic (RSFQ) presents an efficient way to achieve ultra fast digital operations. This logic uses the macroscopic effects which can be found in nano-structured superconductor devices such as the Josephson AC and DC effects, and the magnetic flux quantization. As the typical time of the Josephson junction quantized phase leap 2π is in the order of picoseconds, the RSFQ circuits can operate with clock frequencies in the order of hundreds of GHz. This invited paper focuses on basic principles of superconducting RSFQ logic as well as on typical applications, such as the signal conversion or petaflops computing systems. In addition we point out the benefits of the semi-metallic NbN-TaxN-NbN Josephson junction technology, which has been developed at CEA-INAC in Grenoble.

International Conference Radioelektronika•Apr 1, 2011•10 citations

Superconducting digital technology for ultrafast processing of microwave signals

Romain Collot, Pascal Febvre, Jean-Luc Issler +2 more

Superconducting Rapid Single Flux Quantum (RSFQ) circuits have the ability to perform digital operation with clock signals in the microwave frequency range. The clock signal can be either generated on-chip via Josephson oscillators, or injected externally through microwave lines. We have investigated several configurations to digitize and process on-chip microwave signals for space-based applications, based on the European FLUXONICS Foundry with a niobium-based technology that can opearate at clock frequencies in the 30-40 GHz range. This presentation will focus on the main features of the technology, the expected performances for specific applications and the current status of experimental results of several circuits measured at 4K. It will also feature prospects and expectations, based on circuits already designed and in preparation.

•Sep 25, 2014•0 citations

RSFQ logic/memory family: a new Josephson-junction technology for sub-terahertz-clock-frequency digital systems

K. K. Likharev, Vasili K. Semenov

Recent developments concerning the rapid single-flux-quantum (RSFQ) circuit family are reviewed. Elementary cells in this circuit family can generate, pass, memorize, and reproduce picosecond voltage pulses with a nominally quantized area corresponding to transfer of a single magnetic flux quantum across a Josephson junction. Functionally, each cell can be viewed as a combination of a logic gate and an output latch (register) controlled by clock pulses, which are physically similar to the signal pulses. Hand-shaking style of local exchange by the clock pulses enables one to increase complexity of the LSI RSFQ systems without loss of operating speed. The simplest components of the RSFQ circuitry have been experimentally tested at clock frequencies exceeding 100 GHz, and an increase of the speed beyond 300 GHz is expected as a result of using an up-to-date fabrication technology. This review includes a discussion of possible future developments and applications of this novel, ultrafast digital technology.>

IEEE Transactions on Applied Superconductivity•Mar 1, 1991•2,124 citations

Superconductive single-flux quantum technology

Oleg A. Mukhanov

Key digital circuits for signal processing with tens of gigahertz speed and a few microwatts power dissipation have been recently demonstrated using a simple, 2 /spl mu/m linewidth process. These are the fastest digital circuits reported to date. These circuits use novel rapid single flux quantum (RSFQ) technology that takes advantage of the fundamental properties of superconductivity. In this technology, data and clock are picosecond-long quantized voltage pulses corresponding to the transfer of single magnetic flux quanta, /spl Phisub 0/=h/2e=2 mVps. These SFQ pulses are regenerated at each gate and are processed by circuits comprised of overdamped Josephson junctions interconnected via microstrip inductances. The inherent internal memory of all RSFQ gates (primarily flip-flops), combined with high switching speed, makes serial, bit-pipelined circuit design advantageous. This paper presents experiments in RSFQ digital circuits, including an N/spl times/8b serial multiplier, and on-chip test systems based on RSFQ shift registers and on SFQ samplers. They enable test and study of RSFQ circuits at full GHz speed while communicating with semiconductor electronics at low speed.>

Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference•Dec 17, 2002•8 citations
Rapid-Single-Flux-Quantum (RSFQ) digital circuits based on shunted Josephson junctions have been shown to be able to digitally process signals up to several hundreds GHz. The principle of operation is based on the generation, transport and processing of picosecond voltage pulses of 2.07 mV.ps quantized area, which corresponds to one quantum flux h/2e. Operation of RSFQ circuits can be performed with clock frequencies of the order of 20 to 50 GHz with present technology. We will present current developments and experimental results obtained so far, based on circuits developed in the JeSEF RSFQ process of IPHT Jena, using a 1 kA/cm2 shunted Nb/Al-AlOx/Nb junctions. Some particular potential applications for space will be emphasized
Superconductive microwave rapid single-flux-quantum (RSFQ) digital circuits offer the possibility to digitally process signals in the frequency range of tens of GHz. An example of application to bring the advantages of this technology deals with digital SQUIDs, used for sensitive magnetometry with a broadband dynamics connected to a slew-rate in the GHz range. First recently obtained results of digital SQUID operation, based on Nb/Al-Al2O3/Nb shunted Josephson junctions, are presented in this article. In order to obtain the best performance of RSFQ circuits, and especially to push their speed at its limits, a precise diagnostic of such circuits is needed. We are developing a time-resolved diagnostic system based on sensitive photoconductive switches to sample the weak signals coming out of RSFQ circuits at cryogenic temperature. This system includes two different sorts of opto-RSFQ interfaces, based on superconducting and semiconducting materials, respectively. Some simulation results in the microwave range, along with measurements giving the potentialities of different photoswitches are presented.
Superconductive Rapid Single Flux Quantum (RSFQ) logic and memory, in which ones and zeros are represented by the presence or absence within a timing window of quantized picosecond voltage pulse (/spl int/v(t)dt=h/2e=2.07 mV/spl middot/ps), corresponding to one SFQ, can be integrated into a digital computing system with an operating rate of several tens of GHz, based on the present Nb Josephson junction integrated circuit technology. It is the most promising technology beyond semiconductor transistors for low-power high-end computation. However, as the operating speed of circuits and systems increase, timing uncertainty from fabrication process variations makes global synchronization very hard. In this paper, we present a globally asynchronous, locally synchronous timing methodology for RSFQ digital design, which can solve the global synchronization problem. We also demonstrate the recent experimental results of some asynchronous circuits and systems implemented in RSFQ technology. Several key components such as a self-timed shift register, a self-timed demultiplexor, a Muller-C element, a completion detector, and a clock generator have been designed and tested. High speed operation has been confirmed up to 20 Gb/s for a prototype data buffer system, which consists two self-timed shift registers and an on-chip 5-38 GHz clock generator.
The Rapid Single-Flux-Quantum logic (RSFQ) presents an efficient way to achieve ultra fast digital operations. This logic uses the macroscopic effects which can be found in nano-structured superconductor devices such as the Josephson AC and DC effects, and the magnetic flux quantization. As the typical time of the Josephson junction quantized phase leap 2π is in the order of picoseconds, the RSFQ circuits can operate with clock frequencies in the order of hundreds of GHz. This invited paper focuses on basic principles of superconducting RSFQ logic as well as on typical applications, such as the signal conversion or petaflops computing systems. In addition we point out the benefits of the semi-metallic NbN-TaxN-NbN Josephson junction technology, which has been developed at CEA-INAC in Grenoble.
Superconducting Rapid Single Flux Quantum (RSFQ) circuits have the ability to perform digital operation with clock signals in the microwave frequency range. The clock signal can be either generated on-chip via Josephson oscillators, or injected externally through microwave lines. We have investigated several configurations to digitize and process on-chip microwave signals for space-based applications, based on the European FLUXONICS Foundry with a niobium-based technology that can opearate at clock frequencies in the 30-40 GHz range. This presentation will focus on the main features of the technology, the expected performances for specific applications and the current status of experimental results of several circuits measured at 4K. It will also feature prospects and expectations, based on circuits already designed and in preparation.
Recent developments concerning the rapid single-flux-quantum (RSFQ) circuit family are reviewed. Elementary cells in this circuit family can generate, pass, memorize, and reproduce picosecond voltage pulses with a nominally quantized area corresponding to transfer of a single magnetic flux quantum across a Josephson junction. Functionally, each cell can be viewed as a combination of a logic gate and an output latch (register) controlled by clock pulses, which are physically similar to the signal pulses. Hand-shaking style of local exchange by the clock pulses enables one to increase complexity of the LSI RSFQ systems without loss of operating speed. The simplest components of the RSFQ circuitry have been experimentally tested at clock frequencies exceeding 100 GHz, and an increase of the speed beyond 300 GHz is expected as a result of using an up-to-date fabrication technology. This review includes a discussion of possible future developments and applications of this novel, ultrafast digital technology.>
Key digital circuits for signal processing with tens of gigahertz speed and a few microwatts power dissipation have been recently demonstrated using a simple, 2 /spl mu/m linewidth process. These are the fastest digital circuits reported to date. These circuits use novel rapid single flux quantum (RSFQ) technology that takes advantage of the fundamental properties of superconductivity. In this technology, data and clock are picosecond-long quantized voltage pulses corresponding to the transfer of single magnetic flux quanta, /spl Phisub 0/=h/2e=2 mVps. These SFQ pulses are regenerated at each gate and are processed by circuits comprised of overdamped Josephson junctions interconnected via microstrip inductances. The inherent internal memory of all RSFQ gates (primarily flip-flops), combined with high switching speed, makes serial, bit-pipelined circuit design advantageous. This paper presents experiments in RSFQ digital circuits, including an N/spl times/8b serial multiplier, and on-chip test systems based on RSFQ shift registers and on SFQ samplers. They enable test and study of RSFQ circuits at full GHz speed while communicating with semiconductor electronics at low speed.>