Superconducting Rapid Single Flux Quantum (RSFQ) circuits have the ability to perform digital operation with clock signals in the microwave frequency range. The clock signal can be either generated on-chip via Josephson oscillators, or injected externally through microwave lines. We have investigated several configurations to digitize and process on-chip microwave signals for space-based applications, based on the European FLUXONICS Foundry with a niobium-based technology that can opearate at clock frequencies in the 30-40 GHz range. This presentation will focus on the main features of the technology, the expected performances for specific applications and the current status of experimental results of several circuits measured at 4K. It will also feature prospects and expectations, based on circuits already designed and in preparation.
Superconducting Rapid Single Flux Quantum (RSFQ) circuits have the ability to perform digital operation with clock signals in the microwave frequency range. The clock signal can be either generated on-chip via Josephson oscillators, or injected externally through microwave lines. We have investigated several configurations to digitize and process on-chip microwave signals for space-based applications, based on the European FLUXONICS Foundry with a niobium-based technology that can opearate at clock frequencies in the 30-40 GHz range. This presentation will focus on the main features of the technology, the expected performances for specific applications and the current status of experimental results of several circuits measured at 4K. It will also feature prospects and expectations, based on circuits already designed and in preparation.
Rapid-Single-Flux-Quantum (RSFQ) digital circuits based on shunted Josephson junctions have been shown to be able to digitally process signals up to several hundreds GHz. The principle of operation is based on the generation, transport and processing of picosecond voltage pulses of 2.07 mV.ps quantized area, which corresponds to one quantum flux h/2e. Operation of RSFQ circuits can be performed with clock frequencies of the order of 20 to 50 GHz with present technology. We will present current developments and experimental results obtained so far, based on circuits developed in the JeSEF RSFQ process of IPHT Jena, using a 1 kA/cm2 shunted Nb/Al-AlOx/Nb junctions. Some particular potential applications for space will be emphasized
Superconductive microwave rapid single-flux-quantum (RSFQ) digital circuits offer the possibility to digitally process signals in the frequency range of tens of GHz. An example of application to bring the advantages of this technology deals with digital SQUIDs, used for sensitive magnetometry with a broadband dynamics connected to a slew-rate in the GHz range. First recently obtained results of digital SQUID operation, based on Nb/Al-Al2O3/Nb shunted Josephson junctions, are presented in this article. In order to obtain the best performance of RSFQ circuits, and especially to push their speed at its limits, a precise diagnostic of such circuits is needed. We are developing a time-resolved diagnostic system based on sensitive photoconductive switches to sample the weak signals coming out of RSFQ circuits at cryogenic temperature. This system includes two different sorts of opto-RSFQ interfaces, based on superconducting and semiconducting materials, respectively. Some simulation results in the microwave range, along with measurements giving the potentialities of different photoswitches are presented.
AbstractSuperconducting digital technology based on Rapid Single Flux Quantum (RSFQ) logic offers a 50 times faster clock rate and 100 times less on chip power consumption than today's mainstream semiconductor electronics. This technology is attractive for many applications and in particular for Digital Signal Processing (DSP). The applications of the RSFQ DSPs are numerous and include multi-user detection in spread spectrum system, channel equalization for Multi-in, Multi-out (MIMO) systems, and blind detection and signal tracking for signal intelligence.At Chalmers we are developing a hybrid DSP with target performance of 30 giga operations per second. It consists of an RSFQ Multiply Accumulate unit (MAC), RSFQ fast cache memory, and an external semiconductor memory. The development of the complex high speed cryogenic digital system requires interface, packaging and testing solutions. The main difficulties are due to the 4 K operational temperature, the high magnetic field sensitivity of the RSFQ circuits, the multi-channel high bandwidth interface required in the hybrid architecture, and the high speed RSFQ digital core. The key steps towards addressing each of these problems are the subject of this thesis. The main emphasis is put on the experimental testing and interfacing of superconductor electronics. A large part of the work is connected to the experimental verification of DSP components and their incremental improvement towards functionality. The RSFQ circuits tested were fabricated using the four-metal layer VLSI processes available from NGST(8 kA/cm^2 Josephson junction critical current) and HYPRES (both 1 kA/cm^2 and HYPRES 4.5 kA/cm^2. The main results of the work are demonstrations of the RSFQ cache memory with more than 2,000 Josephson junctions, 33.5 GHz operation of the digital clock controller, and 20.48 GHz operation of the autocorrelator. In addition, various experiments have been done for investigation of parasitic effects in RSFQ circuits such as flux trapping and influence of the high current bias lines.At the final stage of the work, a unique high bandwidth 4 K cryocooler based experimental setup has been developed. The system, developed in close cooperation with Hypres Inc. USA, has 40 high speed I/Os with bandwidth of 2 Gbps, 64 DC bias channels, 4 high frequency clock lines, and 4 auxiliary control lines. It supports exchangeable test units for 10 mm x 10 mm and 20 mm x 20 mm Multi Chip Module (MCM) carriers. The availability of such a system is critical to demonstration of the hybrid DSP prototype and future commercialization.
The article describes the activities aimed at bringing superconductive high-speed electronics towards maturity.Integrated circuits based on the effects in superconducting materials have become feasible for some years already.The main focus lies on the so-called Rapid Single-Flux-Quantum (RSFQ) electronics which allows the combination of high operation frequencies (well above 20 GHz) with very low energy consumption when logical states are changed.Thus, this circuit technology exhibits a promising potential for realising energy-efficient modules for signal processing and computing.Recently, a dedicated design infrastructure has been developed in Europe.Closely associated is a foundry for digital RSFQ integrated circuits so that the fabrication of integrated circuits is viable.In the contribution, the basic features of the RSFQ circuit design are addressed with special emphasis on implementation on the wafer scale.
Superconductive rapid single-flux-quantum (RSFQ) circuits are able to work in a digital mode with clock frequencies of tens to hundreds of GHz. They rely on shunted Josephson junctions assembled with thin films inductors. To date, there is no on-the-shelf instrumentation apparatus which allows to directly verify the digital operation of such circuits in the 100 GHz range and above. Nevertheless, it is of importance of being able to sample the output of RSFQ circuits, and RSFQ pulses themselves, in a time-resolved manner at ultrafast speed, in order to get direct information about the RSFQ circuit behavior and for some specific applications. At this stage, we want to prove that RSFQ circuits can be correctly triggered through optical means, i.e. with a femtosecond Ti-Sa pulsed laser synchronized with a readout setup. Superconducting bridges of different dimensions, based on niobium films, have been designed to act as photoswitches. They have been included in a microwave custom-made circuit connected to a simple RSFQ processing circuit based on the 1 kA/cm2JeSEF RSFQ process of IPHT Jena [1]. The design of different geometries is presented, along with the expected electrical features of the bridges and RSFQ circuits. Preliminary experimental results are also given.
Key digital circuits for signal processing with tens of gigahertz speed and a few microwatts power dissipation have been recently demonstrated using a simple, 2 /spl mu/m linewidth process. These are the fastest digital circuits reported to date. These circuits use novel rapid single flux quantum (RSFQ) technology that takes advantage of the fundamental properties of superconductivity. In this technology, data and clock are picosecond-long quantized voltage pulses corresponding to the transfer of single magnetic flux quanta, /spl Phisub 0/=h/2e=2 mVps. These SFQ pulses are regenerated at each gate and are processed by circuits comprised of overdamped Josephson junctions interconnected via microstrip inductances. The inherent internal memory of all RSFQ gates (primarily flip-flops), combined with high switching speed, makes serial, bit-pipelined circuit design advantageous. This paper presents experiments in RSFQ digital circuits, including an N/spl times/8b serial multiplier, and on-chip test systems based on RSFQ shift registers and on SFQ samplers. They enable test and study of RSFQ circuits at full GHz speed while communicating with semiconductor electronics at low speed.>