Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Superconductor Science and Technology

An energy-resolving superconducting nanowire photon counter

Alexei D. Semenov, Peter J. Haas, B. Günther, Heinz‐Wilhelm Hübers, K. Ilin, M. Siegel, A. Kirste, J. Beyer, D. Drung, T. Schurig, A Smirnov

Published Aug 22, 2007• 43 citations
Publisher

Abstract

We report on the energy-resolving capability of a superconducting NbN nanowire photon counter, which is read out by a superconducting quantum interference device. For counters operated at 6.5 K, a resolution of 0.55 eV was measured in the wavelength range from 1000 to 1500 nm (photon energies 1.2–0.8 eV) along with a counting rate of 2 MHz. The best energy resolution occurred in the spectral range where the quantum efficiency of the counter began to decrease with the wavelength. The results are explained by the change of the detection scenario from the hot-spot formation to unbinding of vortex–antivortex pairs.

DOI
10.1088/0953-2048/20/10/005

Related papers

Intrinsic detection efficiency of superconducting nanowire single-photon detectors with different thicknesses

M. Hofherr, Dagmar Rall, K. Ilin +4 more

We evaluate experimentally the intrinsic detection efficiency (IDE) of superconducting NbN nanowire single-photon detectors in the range of wire thicknesses from 4 to 12 nm. The study is performed in the broad spectral interval between near-ultraviolet (wavelength 400 nm) and near-infrared (wavelength 2000 nm) light with plane waves at normal incidence. For visible light the IDE of the thinnest detectors reaches 70%. We use numerically computed absorptance of the nanowire-structures for the analysis of the experimental data. Variations in the detection efficiency with both the wire thickness and the wavelength evidence the red boundary of the hot-spot photon-detection mechanism. We explain the detection at larger wavelengths invoking thermal excitation of magnetic Pearl vortices over the potential barrier at the edges of the wire.

Journal of Applied Physics•Jul 1, 2010•93 citations

Spectral Sensitivity and Spectral Resolution of Superconducting Single-Photon Detectors

Philipp Moritz Haas, Alexej D. Semenov, Heinz‐Wilhelm Hübers +7 more

Single photon detectors based on meanders from 5-nm thin B1 niobium nitride nanostrips show moderate spectral resolution along with the spectral cut-off of the quantum efficiency occurring in the near-infrared spectral range. Beyond the cut-off there is a gradual decrease of the quantum efficiency. To describe the response beyond the cut-off we combine the previously developed hot-spot detection mechanism with the photon-induced unbinding of the vortex-antivortex pairs, which appear in the superconducting film below the Kosterlitz-Thouless phase transition. The detector responds to the absorption of a single photon with a voltage pulse whose amplitude depends on the photon energy. We report the observation of a photon-energy dependent statistical distribution of the pulse amplitude that defines the energy resolution of the detector. We analyzed the detector response to continuous and femtosecond-pulse radiation using broadband microwave amplifiers and a fast single-shot oscilloscope as well as integrating SQUID amplifiers. Our analysis suggests that both the amplitude and the duration of the response pulses are jointly controlled via the kinetic inductance of the meander line and the Joule power dissipated in the meander by the bias current.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•26 citations

Photon and dark counts in NbN superconducting single-photon detectors and nanostripes

J. Kitaygorsky, Sobolewski, Roman

Nanostructured NbN superconducting single-photon detectors (SSPDs) are fast and reliable photon counters that have become a highly desired technology in recent years. SSPDs feature counting rates up to 250 MHz in the wavelength range from UV to mid-IR, along with very low dark count rates, low timing jitter, and high detection efficiencies. Nanosecond and sub-nanosecond spontaneous transient voltage pulses, or dark counts, are studied in SSPDs along with NbN nanostripes of various dimensions. Dark counts, along with quantum efficiency (QE), determine the ultimate SSPD sensitivity. In experiments, the detector was completely isolated from the outside world by a metallic shield, and kept at temperatures below the superconducting critical temperature. Dark counts are associated with the formation of phase-slip centers, and dissociation of vortex-antivortex pairs, due to thermal fluctuations. Both temperature and current dependences are studied extensively. Additionally, resistive transitions of different samples are investigated, as well as their transport properties. Investigation of the photodetection mechanism, which requires understanding of hotspot dynamics, is presented. This was accomplished by measuring the QE dependence on temperature; it was found that QE increases monotonically with decreasing temperature. Additionally, two different read-out schemes are presented: the first is the standard scheme, where SSPDs act as photon counters, and dark counts are indistinguishable from photon counts. The second scheme is based on integrating the SSPD with a low-noise cryogenic HEMT amplifier with high-input impedance, which allows us to achieve amplitude resolution of the recorded output transients. The new read-out technique should enable photon-number resolving capability of standard devices, and possibly even energy-resolving capability, while also allowing us to study further the physics of dark counts and the photoresponse mechanism.

•Jan 1, 2008•4 citations

Improved photon counting efficiency calibration using superconducting single photon detectors

Haiyong Gan, Nan Xu, Jianwei Li +9 more

The quantum efficiency of photon counters can be measured with standard uncertainty below 1% level using correlated photon pairs generated through spontaneous parametric down-conversion process. Normally a laser in UV, blue or green wavelength range with sufficient photon energy is applied to produce energy and momentum conserved photon pairs in two channels with desired wavelengths for calibration. One channel is used as the heralding trigger, and the other is used for the calibration of the detector under test. A superconducting nanowire single photon detector with advantages such as high photon counting speed (<20 MHz), low dark count rate (<50 counts per second), and wideband responsivity (UV to near infrared) is used as the trigger detector, enabling correlated photons calibration capabilities into shortwave visible range. For a 355nm single longitudinal mode pump laser, when a superconducting nanowire single photon detector is used as the trigger detector at 1064nm and 1560nm in the near infrared range, the photon counting efficiency calibration capabilities can be realized at 532nm and 460nm. The quantum efficiency measurement on photon counters such as photomultiplier tubes and avalanche photodiodes can be then further extended in a wide wavelength range (e.g. 400-1000nm) using a flat spectral photon flux source to meet the calibration demands in cutting edge low light applications such as time resolved fluorescence and nonlinear optical spectroscopy, super resolution microscopy, deep space observation, and so on.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Oct 15, 2015•0 citations

Superconducting nanowire single-photon detectors: Quantum efficiency vs. film thickness

M. Hofherr, Dagmar Rall, K. Ilin +4 more

The quantum efficiency of superconducting nanowire single-photon detectors has been systematically studied in a broad spectral range from near ultra-violet to near infrared radiation. Detectors were made from NbN films on sapphire substrates and had thicknesses between 4 and 12 nm. The gradual reduction of the quantum efficiency with increasing wavelength is caused by a crossover from the "hot-spot" to the "vortex" detection scenario. For thicker films the wavelength demarcating the two regimes shifts to shorter wavelengths.

Journal of Physics Conference Series•Jun 1, 2010•10 citations

A high speed and high efficiency superconducting photon number resolving detector

Tao Xu, Shi Chen, Yajun Chen +8 more

Abstract A series superconducting nanowire single-photon detector is a high performance nanowire array detector that has the potential to reach a high system detection efficiency (SQE), a high counting rate (CR) and photon number resolving functionality. Interconnected with a simplified readout, it shows promise for large scale expansion and has good prospects for future applications in single-photon imaging, quantum optics, quantum computing and deep-space communication. In this paper, we demonstrate a high SQE and CR series superconducting nanowire single-photon detector with an active area of 20 × 20 μ m 2 . The detector shows a maximum SQE of 68% at 1550 nm with a dark count rate of 200 Hz and a wide response wavelength from 1100–2000 nm. It also achieves a CR over 300 MHz at single photon power level and has the capability of resolving photon numbers by up to six photons.

Superconductor Science and Technology•Feb 15, 2019•22 citations
We report on the energy-resolving capability of a superconducting NbN nanowire photon counter, which is read out by a superconducting quantum interference device. For counters operated at 6.5 K, a resolution of 0.55 eV was measured in the wavelength range from 1000 to 1500 nm (photon energies 1.2–0.8 eV) along with a counting rate of 2 MHz. The best energy resolution occurred in the spectral range where the quantum efficiency of the counter began to decrease with the wavelength. The results are explained by the change of the detection scenario from the hot-spot formation to unbinding of vortex–antivortex pairs.
We evaluate experimentally the intrinsic detection efficiency (IDE) of superconducting NbN nanowire single-photon detectors in the range of wire thicknesses from 4 to 12 nm. The study is performed in the broad spectral interval between near-ultraviolet (wavelength 400 nm) and near-infrared (wavelength 2000 nm) light with plane waves at normal incidence. For visible light the IDE of the thinnest detectors reaches 70%. We use numerically computed absorptance of the nanowire-structures for the analysis of the experimental data. Variations in the detection efficiency with both the wire thickness and the wavelength evidence the red boundary of the hot-spot photon-detection mechanism. We explain the detection at larger wavelengths invoking thermal excitation of magnetic Pearl vortices over the potential barrier at the edges of the wire.
Single photon detectors based on meanders from 5-nm thin B1 niobium nitride nanostrips show moderate spectral resolution along with the spectral cut-off of the quantum efficiency occurring in the near-infrared spectral range. Beyond the cut-off there is a gradual decrease of the quantum efficiency. To describe the response beyond the cut-off we combine the previously developed hot-spot detection mechanism with the photon-induced unbinding of the vortex-antivortex pairs, which appear in the superconducting film below the Kosterlitz-Thouless phase transition. The detector responds to the absorption of a single photon with a voltage pulse whose amplitude depends on the photon energy. We report the observation of a photon-energy dependent statistical distribution of the pulse amplitude that defines the energy resolution of the detector. We analyzed the detector response to continuous and femtosecond-pulse radiation using broadband microwave amplifiers and a fast single-shot oscilloscope as well as integrating SQUID amplifiers. Our analysis suggests that both the amplitude and the duration of the response pulses are jointly controlled via the kinetic inductance of the meander line and the Joule power dissipated in the meander by the bias current.
Nanostructured NbN superconducting single-photon detectors (SSPDs) are fast and reliable photon counters that have become a highly desired technology in recent years. SSPDs feature counting rates up to 250 MHz in the wavelength range from UV to mid-IR, along with very low dark count rates, low timing jitter, and high detection efficiencies. Nanosecond and sub-nanosecond spontaneous transient voltage pulses, or dark counts, are studied in SSPDs along with NbN nanostripes of various dimensions. Dark counts, along with quantum efficiency (QE), determine the ultimate SSPD sensitivity. In experiments, the detector was completely isolated from the outside world by a metallic shield, and kept at temperatures below the superconducting critical temperature. Dark counts are associated with the formation of phase-slip centers, and dissociation of vortex-antivortex pairs, due to thermal fluctuations. Both temperature and current dependences are studied extensively. Additionally, resistive transitions of different samples are investigated, as well as their transport properties. Investigation of the photodetection mechanism, which requires understanding of hotspot dynamics, is presented. This was accomplished by measuring the QE dependence on temperature; it was found that QE increases monotonically with decreasing temperature. Additionally, two different read-out schemes are presented: the first is the standard scheme, where SSPDs act as photon counters, and dark counts are indistinguishable from photon counts. The second scheme is based on integrating the SSPD with a low-noise cryogenic HEMT amplifier with high-input impedance, which allows us to achieve amplitude resolution of the recorded output transients. The new read-out technique should enable photon-number resolving capability of standard devices, and possibly even energy-resolving capability, while also allowing us to study further the physics of dark counts and the photoresponse mechanism.
The quantum efficiency of photon counters can be measured with standard uncertainty below 1% level using correlated photon pairs generated through spontaneous parametric down-conversion process. Normally a laser in UV, blue or green wavelength range with sufficient photon energy is applied to produce energy and momentum conserved photon pairs in two channels with desired wavelengths for calibration. One channel is used as the heralding trigger, and the other is used for the calibration of the detector under test. A superconducting nanowire single photon detector with advantages such as high photon counting speed (<20 MHz), low dark count rate (<50 counts per second), and wideband responsivity (UV to near infrared) is used as the trigger detector, enabling correlated photons calibration capabilities into shortwave visible range. For a 355nm single longitudinal mode pump laser, when a superconducting nanowire single photon detector is used as the trigger detector at 1064nm and 1560nm in the near infrared range, the photon counting efficiency calibration capabilities can be realized at 532nm and 460nm. The quantum efficiency measurement on photon counters such as photomultiplier tubes and avalanche photodiodes can be then further extended in a wide wavelength range (e.g. 400-1000nm) using a flat spectral photon flux source to meet the calibration demands in cutting edge low light applications such as time resolved fluorescence and nonlinear optical spectroscopy, super resolution microscopy, deep space observation, and so on.
The quantum efficiency of superconducting nanowire single-photon detectors has been systematically studied in a broad spectral range from near ultra-violet to near infrared radiation. Detectors were made from NbN films on sapphire substrates and had thicknesses between 4 and 12 nm. The gradual reduction of the quantum efficiency with increasing wavelength is caused by a crossover from the "hot-spot" to the "vortex" detection scenario. For thicker films the wavelength demarcating the two regimes shifts to shorter wavelengths.
Abstract A series superconducting nanowire single-photon detector is a high performance nanowire array detector that has the potential to reach a high system detection efficiency (SQE), a high counting rate (CR) and photon number resolving functionality. Interconnected with a simplified readout, it shows promise for large scale expansion and has good prospects for future applications in single-photon imaging, quantum optics, quantum computing and deep-space communication. In this paper, we demonstrate a high SQE and CR series superconducting nanowire single-photon detector with an active area of 20 × 20 μ m 2 . The detector shows a maximum SQE of 68% at 1550 nm with a dark count rate of 200 Hz and a wide response wavelength from 1100–2000 nm. It also achieves a CR over 300 MHz at single photon power level and has the capability of resolving photon numbers by up to six photons.