Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Spectral Sensitivity and Spectral Resolution of Superconducting Single-Photon Detectors

Philipp Moritz Haas, Alexej D. Semenov, Heinz‐Wilhelm Hübers, P.J. Beyer, A. Kirste, T. Schurig, K. Ilin, M. Siegel, Andreas Engel, A. V. Smirnov

Published Jun 1, 2007• 26 citations
Publisher

Abstract

Single photon detectors based on meanders from 5-nm thin B1 niobium nitride nanostrips show moderate spectral resolution along with the spectral cut-off of the quantum efficiency occurring in the near-infrared spectral range. Beyond the cut-off there is a gradual decrease of the quantum efficiency. To describe the response beyond the cut-off we combine the previously developed hot-spot detection mechanism with the photon-induced unbinding of the vortex-antivortex pairs, which appear in the superconducting film below the Kosterlitz-Thouless phase transition. The detector responds to the absorption of a single photon with a voltage pulse whose amplitude depends on the photon energy. We report the observation of a photon-energy dependent statistical distribution of the pulse amplitude that defines the energy resolution of the detector. We analyzed the detector response to continuous and femtosecond-pulse radiation using broadband microwave amplifiers and a fast single-shot oscilloscope as well as integrating SQUID amplifiers. Our analysis suggests that both the amplitude and the duration of the response pulses are jointly controlled via the kinetic inductance of the meander line and the Joule power dissipated in the meander by the bias current.

DOI
10.1109/tasc.2007.898713

Related papers

Energy resolution of a superconducting quantum detector

Alexei D. Semenov, Andreas Engel, Heinz‐Wilhelm Hübers +2 more

Thin film cryogenic bolometers are widely used as integrating detectors for infrared and millimeter wave radiation. A superconducting quantum detector based on a nanometer-scaled structure may be an alternative for future applications where energy resolved single-photon detection and fast response times are simultaneously required. The mechanism responsible for the single-photon detection capability is due to the combined action of a hot-spot formation after photon absorption and a subsequent normal domain caused by an applied bias current [1]. We present recent results on energy resolution and spectral sensitivity of infrared quantum detectors made of different materials (Nb and NbN). The spectral response of the detector exhibits a pronounced threshold at a particular photon energy E0 that depends on the material and detector geometry. According to the detector model, information about the photons energy is contained in the amplitude and duration of the voltage pulse. A reasonable energy resolution is expected only for photon energies E >> E0. Preliminary experiments performed near the threshold energy have shown that the time integral of the response pulses indeed varied with the photon energy. The observed energy resolution of about 20% at 0.6 eV was not sufficient for practical applications. However, these preliminary data validate the response mechanism and support the envisaged performance at higher photon energies. [1] Semenov A D, Gol'tsman G N and Korneev A A 2001 Physica C 351 349.

•Jan 1, 2004•0 citations

Spectral response of an infrared superconducting quantum detector

Alexei D. Semenov, Andreas Engel, Heinz‐Wilhelm Hübers +2 more

We analyze the spectral performance of recently developed single-photon quantum detector that consists of a narrow, nanometer sized meander-line made from ultra-thin superconducting film. The detector exploits a combined detection mechanism, in which avalanche multiplication of quasiparticles after absorption of a single photon and the bias current jointly produce a normal domain that results in a voltage pulse developing between the meander ends. With either the wavelength increase or the bias current decrease, the single-photon detection regime exhibits a cut-off. The wavelength, at which the cut-off occurs, varies from infrared waves to visible light depending on the superconducting material and operation conditions. Structural and geometrical non-uniformities of the meander line smooth out the otherwise expected sharp drop of the detection efficiency beyond the cut-off. We refine the early detector model and propose a tentative explanation of how superconducting fluctuations may additionally extend the detection efficiency beyond the cut-off wavelength.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Sep 1, 2004•5 citations

Energy resolution of a superconductor quantum detector

Alexei Semenov, Andreas Engel, Heinz‐Wilhelm Hübers +2 more

We report on the energy resolution of a recently developed superconductor single-photon quantum detector. In a superconducting strip quasiparticles created by a single absorbed photon and a bias current jointly cause a normal domain and, subsequently, a voltage transient that manifests absorption of the photon. Given a constant optical coupling, the mechanism suggests a moderate to good energy resolution in the wavelength range from near-infrared to X-rays. We implemented a meander line from a 80-nm wide and 5-nm thick NbN strip to detect single near-infrared photons with the repetition rate 5•107 sec-1 and quantum efficiency of few per cent. Although with this detector operated at 2 K we have indeed observed photon-energy dependent detector response, the energy resolving capability appeared smaller than the detector model predicted. We suggest that the inconsistency owes to the influence of the bias current.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Sep 29, 2004•1 citation

Intrinsic quantum efficiency and electro-thermal model of a superconducting nanowire single-photon detector

Alexei D. Semenov, Philipp Moritz Haas, Heinz‐Wilhelm Hübers +6 more

Superconducting single-photon detectors from thin niobium nitride nanostrips exhibit a cut-off of the wavelength-independent quantum efficiency along with a moderate energy resolution in the near-infrared spectral range. Before the cut-off, the intrinsic quantum efficiency of the detector reaches ≈30% of the ultimate value, which is physically limited to the absorbance of the detector structure. The intrinsic quantum efficiency is most likely controlled by non-homogeneities of the niobium nitride films. We have developed an electro-thermal model of the detector response that allowed us to optimize the SQUID-based readout and to achieve, in the temperature range from 1 to 6 K, the photon count rate 3 × 107 s−1 and a dark count rate less than 10−4 s−1.

Journal of Modern Optics•Jan 20, 2009•31 citations

SQUID-Readout for the Superconducting Nanowire Single-Photon Detector

A. Kirste, Alexey Semenov, Heinz‐Wilhelm Hübers +5 more

Superconducting single-photon detectors from thin niobium nitride nanostrips exhibit a near-infrared cut-off of the wavelength-independent quantum efficiency along with a moderate energy resolution in the wavelength range around the cut-off. For the wavelength range before the cut-off, we have developed the electro-thermal model that describes the initial growth, diminution and disappearance of the normal domain created by a photon in the superconducting nanostrip. The response parameters extracted from the model fit were used to optimize the signal-to-noise ratio of the SQUID-based readout and to achieve in the temperature range from 1 to 4 K a photon counting frequency of 20 MHz and a dark count rate less than four in one hour.

IEEE Transactions on Applied Superconductivity•Jun 1, 2009•6 citations

Spectral performance of a single-photon detector

A. Semenov, Andreas Engel, Heinz‐Wilhelm Hübers +2 more

We have experimentally studied the supercurrent-assisted formation of the resistive state in nano-structured disordered superconducting Nb(N) films after absorption of a single optical to near-infrared photon. The efficiency of the resistive state formation has a pronounced spectral cut-off; corresponding threshold photon energy decreases with the bias current. Analysis of the experimental data in the framework of the refined hot-spot model suggests that the quantum yield for near-infrared photons increases with the photon energy. Relaxation of the resistive state depends on the photon energy making the phenomena feasible for the development of energy resolving single-photon detectors.

•Jan 1, 2005•6 citations
Single photon detectors based on meanders from 5-nm thin B1 niobium nitride nanostrips show moderate spectral resolution along with the spectral cut-off of the quantum efficiency occurring in the near-infrared spectral range. Beyond the cut-off there is a gradual decrease of the quantum efficiency. To describe the response beyond the cut-off we combine the previously developed hot-spot detection mechanism with the photon-induced unbinding of the vortex-antivortex pairs, which appear in the superconducting film below the Kosterlitz-Thouless phase transition. The detector responds to the absorption of a single photon with a voltage pulse whose amplitude depends on the photon energy. We report the observation of a photon-energy dependent statistical distribution of the pulse amplitude that defines the energy resolution of the detector. We analyzed the detector response to continuous and femtosecond-pulse radiation using broadband microwave amplifiers and a fast single-shot oscilloscope as well as integrating SQUID amplifiers. Our analysis suggests that both the amplitude and the duration of the response pulses are jointly controlled via the kinetic inductance of the meander line and the Joule power dissipated in the meander by the bias current.
Thin film cryogenic bolometers are widely used as integrating detectors for infrared and millimeter wave radiation. A superconducting quantum detector based on a nanometer-scaled structure may be an alternative for future applications where energy resolved single-photon detection and fast response times are simultaneously required. The mechanism responsible for the single-photon detection capability is due to the combined action of a hot-spot formation after photon absorption and a subsequent normal domain caused by an applied bias current [1]. We present recent results on energy resolution and spectral sensitivity of infrared quantum detectors made of different materials (Nb and NbN). The spectral response of the detector exhibits a pronounced threshold at a particular photon energy E0 that depends on the material and detector geometry. According to the detector model, information about the photons energy is contained in the amplitude and duration of the voltage pulse. A reasonable energy resolution is expected only for photon energies E >> E0. Preliminary experiments performed near the threshold energy have shown that the time integral of the response pulses indeed varied with the photon energy. The observed energy resolution of about 20% at 0.6 eV was not sufficient for practical applications. However, these preliminary data validate the response mechanism and support the envisaged performance at higher photon energies. [1] Semenov A D, Gol'tsman G N and Korneev A A 2001 Physica C 351 349.
We analyze the spectral performance of recently developed single-photon quantum detector that consists of a narrow, nanometer sized meander-line made from ultra-thin superconducting film. The detector exploits a combined detection mechanism, in which avalanche multiplication of quasiparticles after absorption of a single photon and the bias current jointly produce a normal domain that results in a voltage pulse developing between the meander ends. With either the wavelength increase or the bias current decrease, the single-photon detection regime exhibits a cut-off. The wavelength, at which the cut-off occurs, varies from infrared waves to visible light depending on the superconducting material and operation conditions. Structural and geometrical non-uniformities of the meander line smooth out the otherwise expected sharp drop of the detection efficiency beyond the cut-off. We refine the early detector model and propose a tentative explanation of how superconducting fluctuations may additionally extend the detection efficiency beyond the cut-off wavelength.
We report on the energy resolution of a recently developed superconductor single-photon quantum detector. In a superconducting strip quasiparticles created by a single absorbed photon and a bias current jointly cause a normal domain and, subsequently, a voltage transient that manifests absorption of the photon. Given a constant optical coupling, the mechanism suggests a moderate to good energy resolution in the wavelength range from near-infrared to X-rays. We implemented a meander line from a 80-nm wide and 5-nm thick NbN strip to detect single near-infrared photons with the repetition rate 5•107 sec-1 and quantum efficiency of few per cent. Although with this detector operated at 2 K we have indeed observed photon-energy dependent detector response, the energy resolving capability appeared smaller than the detector model predicted. We suggest that the inconsistency owes to the influence of the bias current.
Superconducting single-photon detectors from thin niobium nitride nanostrips exhibit a cut-off of the wavelength-independent quantum efficiency along with a moderate energy resolution in the near-infrared spectral range. Before the cut-off, the intrinsic quantum efficiency of the detector reaches ≈30% of the ultimate value, which is physically limited to the absorbance of the detector structure. The intrinsic quantum efficiency is most likely controlled by non-homogeneities of the niobium nitride films. We have developed an electro-thermal model of the detector response that allowed us to optimize the SQUID-based readout and to achieve, in the temperature range from 1 to 6 K, the photon count rate 3 × 107 s−1 and a dark count rate less than 10−4 s−1.
Superconducting single-photon detectors from thin niobium nitride nanostrips exhibit a near-infrared cut-off of the wavelength-independent quantum efficiency along with a moderate energy resolution in the wavelength range around the cut-off. For the wavelength range before the cut-off, we have developed the electro-thermal model that describes the initial growth, diminution and disappearance of the normal domain created by a photon in the superconducting nanostrip. The response parameters extracted from the model fit were used to optimize the signal-to-noise ratio of the SQUID-based readout and to achieve in the temperature range from 1 to 4 K a photon counting frequency of 20 MHz and a dark count rate less than four in one hour.
We have experimentally studied the supercurrent-assisted formation of the resistive state in nano-structured disordered superconducting Nb(N) films after absorption of a single optical to near-infrared photon. The efficiency of the resistive state formation has a pronounced spectral cut-off; corresponding threshold photon energy decreases with the bias current. Analysis of the experimental data in the framework of the refined hot-spot model suggests that the quantum yield for near-infrared photons increases with the photon energy. Relaxation of the resistive state depends on the photon energy making the phenomena feasible for the development of energy resolving single-photon detectors.