Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Loading an Equidistant Ion Chain in a Ring Shaped Surface Trap and Anomalous Heating Studies with a High Optical Access Trap

Boyan Tabakov

Published Sep 1, 2015• 0 citations
OpenAlex

Abstract

Microfabricated segmented surface ion traps are one viable avenue to scalable quantum information processing. At Sandia National Laboratories we design, fabricate, and characterize such traps. Our unique fabrication capabilities allow us to design traps that facilitate tasks beyond quantum information processing. The design and performance of a trap with a target capability of storing hundreds of equally spaced ions on a ring is described. Such a device could aid experimental studies of phenom- ena as diverse as Hawking radiation, quantum phase transitions, and the Aharonov - Bohm effect. The fabricated device is demonstrated to hold a \u223c 400 ion circular crystal, with 9 μm average spacing between ions. The task is accomplished by first characterizing undesired electric fields in the trapping volume and then designing and applying an electric field that substantially reduces the undesired fields. In addition, experimental efforts are described to reduce the motional heating rates in a surface trap by low energy in situ argon plasma treatment that reduces the amount of surface contaminants. The experiment explores the premise that carbonaceous compounds present on the surface contribute to the anomalous heating of secular motion modes in surface traps. This is a research area of fundamental interest to the ion trapping community, as heating adversely affects coherence and thus gate fidelity. The de- vice used provides high optical laser access, substantially reducing scatter from the surface, and thus charging that may lead to excess micromotion. Heating rates for different axial mode frequencies are compared before and after plasma treatment. The presence of a carbon source near the plasma prevents making a conclusion on the observed absence of change in heating rates.

Related papers

Implementing segmented ion trap designs for quantum computing

Gergely Imreh

With all the key elements of quantum computing in ion traps demonstrated by the research community, the focus is now placed on building more sophisticated traps with larger numbers of ions to allow practical scale information processing. One promising avenue is to store ions in and shuttle them between many independent traps which serve as potential interaction sites. The core of the work described in this thesis is the experimental evaluation of a microfabricated segmented ion trap, built by Sandia National Laboratories ("Sandia trap"). These experiments required construction of a wholly new optical setup including laser and detection systems, a vacuum system and control electronics. Among our experimental achievements were: successful loading of single and pairs of ions in the microscale trap, measurement of ion storage lifetime, measurement of the motional heating rate with a time-resolved Doppler-cooling method — which showed above than average heating, and implemented a single-ion shuttling method — which reliably transferred the ion through a distance of 360 μm (two DC electrode widths away) and back. These results have been used to improve the next version of the Sandia trap design. We also used computer modelling to study several aspects of ion traps: a mesoscopic ion trap designed for fast ion separation, simulated ion loading to quantify requirements for successful trapping in small and shallow traps, and analyzed a precise shuttling method — where the time dependence of the trapping potential is engineered such that there is minimal motional heating. The results show that ion trap arrays at the 100 μm distance scale are feasible and suggests that such multiple trap designs merit further study.

•Jan 1, 2008•5 citations

Characterization of surface ion trap structures for quantum information processing.

Susan Clark, Craig Robert Clark, Raymond A. Haltli +6 more

Scaling trapped ion quantum information processing to large numbers of qubits relies on micro-fabricated traps optimized for the applications in quantum computing and quantum simulation.High trap frequencies and excellent optical access are the key features necessary for quantum information processing that are realized in Sandia's bowtie shaped High Optical Access trap.For quantum simulations long equidistant chains of ions, and ring-shaped crystals are of interest.Here, we demonstrate a chain of approximately 350 ions in a highly symmetric ring trap. Ring Trap10 mm Motivation • Large equidistant ion crystal • RF potential is sufficient to trap ion chain • Periodic boundary conditions • Possible applications: • phase transitions (E.

•Jan 1, 2014•0 citations

Surface-electrode ion traps for scalable quantum computing

D. T. C. Allcock

The major challenges in trapped-ion quantum computation are to scale up few-ion experiments to many qubits and to improve control techniques so that quantum logic gates can be carried out with higher fidelities. This thesis reports experimental progress in both of these areas. In the early part of the thesis we describe the fabrication of a surface-electrode ion trap, the development of the apparatus and techniques required to operate it and the successful trapping of 40Ca+ ions. Notably we developed methods to control the orientation of the principal axes and to minimise ion micromotion. We propose a repumping scheme that simplifies heating rate measurements for ions with low-lying D levels, and use it to characterise the electric field noise in the trap. Surface-electrode traps are important because they offer a route to dense integration of electronic and optical control elements using existing microfabrication technology. We explore this scaling route by testing a series of three traps that were microfabricated at Sandia National Laboratories. Investigations of micromotion and charging of the surface by laser beams were carried out and improvements to future traps are suggested. Using one of these traps we also investigated anomalous electrical noise from the electrode surfaces and discovered that it can be reduced by cleaning with a pulsed laser. A factor of two decrease was observed; this represents the first in situ removal of this noise source, an important step towards higher gate fidelities. In the second half of the thesis we describe the design and construction of an experiment for the purpose of replacing laser-driven multi-qubit quantum logic gates with microwave-driven ones. We investigate magnetic-field-independent hyperfine qubits in 40Ca+ as suitable qubits for this scheme. We make a design study of how best to integrate an ion trap with the microwave conductors required to implement the gate and propose a novel integrated resonant structure. The trap was fabricated and ions were successfully loaded. Single-qubit experiments show that the microwave fields above the trap are in excellent agreement with software simulations. There are good prospects for demonstrating a multi-qubit gate in the near future. We conclude by discussing the possibilities for larger-scale quantum computation by combining microfabricated traps and microwave control.

•Jan 1, 2011•5 citations

A monolithic segmented 3D ion trap fabricated from fused silica by selective laser-induced etching

Edgar Brucke, Martin Wagener, Moritz Fontboté-Schmidt +10 more

We present the design, fabrication, and characterization of a monolithic, segmented, three-dimensional linear Paul ion trap for quantum science applications. The trap is fabricated from a single fused-silica block using selective laser-induced etching (SLE) and is subsequently metallized, forming electrodes isolated by self-shadowing trench structures without the need for layer alignment or external shadow masks. The segmented electrodes allow for shaping of the axial potential, enabling the creation of anharmonic potential wells, such as those required for equidistant ion strings. In addition, they enable shuttling and splitting of ion chains. We discuss key design choices and SLE-imposed constraints on achievable feature sizes, and evaluate electron-beam evaporation and magnetron sputtering as metallization approaches. Across two independent experimental setups, we demonstrate stable trapping and control of linear chains of up to 33 $^{40}$Ca$^+$ ions, including approximately equally spaced configurations. The measured secular frequencies in both traps agree with boundary-element simulations at the percent level, with residual deviations attributed to stray electric fields in the presence of anharmonic axial potentials, rather than fabrication imperfections. We measure axial micromotion field strengths on the order of 100 V/m along the trap axis, in approximate agreement with simulations. For radial mode frequencies near 2 MHz and an ion-electrode distance of 300 um, we measure heating rates of the order of 10 quanta/s in all but one motional mode, which is elevated by a technical noise source. The presented trap design is thus suitable for a wide range of quantum science applications and demonstrates the viability of SLE for the fabrication of finely segmented, monolithic, three-dimensional ion traps.

physics.atom-phCross-listedarXiv:2609.01694•Sep 2, 2026•0 citations

Controlling trapping potentials and stray electric fields in a microfabricated ion trap through design and compensation

S. Charles Doret, Jason Amini, Kenneth Wright +8 more

Recent advances in quantum information processing with trapped ions have demonstrated the need for new ion trap architectures capable of holding and manipulating chains of many (>10) ions. Here we present the design and detailed characterization of a new linear trap, microfabricated with scalable complementary metal-oxide-semiconductor (CMOS) techniques, that is well-suited to this challenge. Forty-four individually controlled dc electrodes provide the many degrees of freedom required to construct anharmonic potential wells, shuttle ions, merge and split ion chains, precisely tune secular mode frequencies, and adjust the orientation of trap axes. Microfabricated capacitors on dc electrodes suppress radio-frequency pickup and excess micromotion, while a top-level ground layer simplifies modeling of electric fields and protects trap structures underneath. A localized aperture in the substrate provides access to the trapping region from an oven below, permitting deterministic loading of particular isotopic/elemental sequences via species-selective photoionization. The shapes of the aperture and radio-frequency electrodes are optimized to minimize perturbation of the trapping pseudopotential. Laboratory experiments verify simulated potentials and characterize trapping lifetimes, stray electric fields, and ion heating rates, while measurement and cancellation of spatially-varying stray electric fields permits the formation of nearly-equally spaced ion chains.

arXiv:1204.4147•New Journal of Physics•Jul 6, 2012•77 citations

Development of microfabricated ion traps for scalable microwave quantum technology

Bjoern Lekitsch

Microfabricated ion traps are an important tool in the development of scalable quantum systems. Tremendous advancements towards an ion quantum computer were made in the past decade and most requirements for a quantum computer have been fulfilled in individual experiments. Incorporating all essential capabilities in a fully scalable system will require the further advancement of established quantum information technologies and development of new trap fabrication techniques. In my thesis I will discuss the theoretical background and experimental setup required for the operation of ion traps. Measurement of the important ion trap heating rate was performed in the setup and I will discuss the results in more detail. I will give a review of microfabrication processes used for the fabrication of traps, outlining advantages, disadvantages and issues inherent to the processes. Following the review I will present my work on a concept for a scalable ion trap quantum system based on microwave quantum gates and shuttling through X-junctions. Many of the required building blocks, including ion trap structures with current-carrying wires intended to create strong magnetic field gradients for microwave gates were investigated further. A novel fabrication process was developed to combine current-carrying wires with advanced multilayered ion trap structures. Several trap designs intended for proof of principle experiments of high fidelity microwave gates, advanced detection techniques and shuttling between electrically disconnected ion traps will be presented. Also the electrode geometry of an optimized X-junction design with strongly suppressed rf barrier height will be presented. Further, I developed several modifications for the experimental setup to extend the existing capabilities. A plasma source capable of performing in-situ cleans of the trap electrode surfaces, which has been demonstrated to dramatically reduce the heating rate in ion traps, was incorporated. I will also present a vacuum system modification designed to cool ion traps with current-carrying wires and transport the generated heat out of the vacuum system. In addition a novel low-noise, high-speed, multichannel voltage control system was developed by me. The device can be used in future experiments to precisely shuttle ions from one trapping zone to another and also to shuttle ions through ion trap junctions. Lastly I will outline the process optimization and microfabrication of my ion trap designs. A novel fabrication process which makes use of the extremely high thermal conductivity of diamond substrates and combines it with thick copper tracks embedded in the substrate was developed. Large currents will be passed through the wires creating a strong and controllable magnetic field gradient. Ion trap designs with isolated electrodes connected via buried wires can be placed on top of the current-carrying wires, allowing the most advanced electrode designs to be fabricated with current-carrying wires.

•May 18, 2015•0 citations
Microfabricated segmented surface ion traps are one viable avenue to scalable quantum information processing. At Sandia National Laboratories we design, fabricate, and characterize such traps. Our unique fabrication capabilities allow us to design traps that facilitate tasks beyond quantum information processing. The design and performance of a trap with a target capability of storing hundreds of equally spaced ions on a ring is described. Such a device could aid experimental studies of phenom- ena as diverse as Hawking radiation, quantum phase transitions, and the Aharonov - Bohm effect. The fabricated device is demonstrated to hold a \u223c 400 ion circular crystal, with 9 μm average spacing between ions. The task is accomplished by first characterizing undesired electric fields in the trapping volume and then designing and applying an electric field that substantially reduces the undesired fields. In addition, experimental efforts are described to reduce the motional heating rates in a surface trap by low energy in situ argon plasma treatment that reduces the amount of surface contaminants. The experiment explores the premise that carbonaceous compounds present on the surface contribute to the anomalous heating of secular motion modes in surface traps. This is a research area of fundamental interest to the ion trapping community, as heating adversely affects coherence and thus gate fidelity. The de- vice used provides high optical laser access, substantially reducing scatter from the surface, and thus charging that may lead to excess micromotion. Heating rates for different axial mode frequencies are compared before and after plasma treatment. The presence of a carbon source near the plasma prevents making a conclusion on the observed absence of change in heating rates.
With all the key elements of quantum computing in ion traps demonstrated by the research community, the focus is now placed on building more sophisticated traps with larger numbers of ions to allow practical scale information processing. One promising avenue is to store ions in and shuttle them between many independent traps which serve as potential interaction sites. The core of the work described in this thesis is the experimental evaluation of a microfabricated segmented ion trap, built by Sandia National Laboratories ("Sandia trap"). These experiments required construction of a wholly new optical setup including laser and detection systems, a vacuum system and control electronics. Among our experimental achievements were: successful loading of single and pairs of ions in the microscale trap, measurement of ion storage lifetime, measurement of the motional heating rate with a time-resolved Doppler-cooling method — which showed above than average heating, and implemented a single-ion shuttling method — which reliably transferred the ion through a distance of 360 μm (two DC electrode widths away) and back. These results have been used to improve the next version of the Sandia trap design. We also used computer modelling to study several aspects of ion traps: a mesoscopic ion trap designed for fast ion separation, simulated ion loading to quantify requirements for successful trapping in small and shallow traps, and analyzed a precise shuttling method — where the time dependence of the trapping potential is engineered such that there is minimal motional heating. The results show that ion trap arrays at the 100 μm distance scale are feasible and suggests that such multiple trap designs merit further study.
Scaling trapped ion quantum information processing to large numbers of qubits relies on micro-fabricated traps optimized for the applications in quantum computing and quantum simulation.High trap frequencies and excellent optical access are the key features necessary for quantum information processing that are realized in Sandia's bowtie shaped High Optical Access trap.For quantum simulations long equidistant chains of ions, and ring-shaped crystals are of interest.Here, we demonstrate a chain of approximately 350 ions in a highly symmetric ring trap. Ring Trap10 mm Motivation • Large equidistant ion crystal • RF potential is sufficient to trap ion chain • Periodic boundary conditions • Possible applications: • phase transitions (E.
The major challenges in trapped-ion quantum computation are to scale up few-ion experiments to many qubits and to improve control techniques so that quantum logic gates can be carried out with higher fidelities. This thesis reports experimental progress in both of these areas. In the early part of the thesis we describe the fabrication of a surface-electrode ion trap, the development of the apparatus and techniques required to operate it and the successful trapping of 40Ca+ ions. Notably we developed methods to control the orientation of the principal axes and to minimise ion micromotion. We propose a repumping scheme that simplifies heating rate measurements for ions with low-lying D levels, and use it to characterise the electric field noise in the trap. Surface-electrode traps are important because they offer a route to dense integration of electronic and optical control elements using existing microfabrication technology. We explore this scaling route by testing a series of three traps that were microfabricated at Sandia National Laboratories. Investigations of micromotion and charging of the surface by laser beams were carried out and improvements to future traps are suggested. Using one of these traps we also investigated anomalous electrical noise from the electrode surfaces and discovered that it can be reduced by cleaning with a pulsed laser. A factor of two decrease was observed; this represents the first in situ removal of this noise source, an important step towards higher gate fidelities. In the second half of the thesis we describe the design and construction of an experiment for the purpose of replacing laser-driven multi-qubit quantum logic gates with microwave-driven ones. We investigate magnetic-field-independent hyperfine qubits in 40Ca+ as suitable qubits for this scheme. We make a design study of how best to integrate an ion trap with the microwave conductors required to implement the gate and propose a novel integrated resonant structure. The trap was fabricated and ions were successfully loaded. Single-qubit experiments show that the microwave fields above the trap are in excellent agreement with software simulations. There are good prospects for demonstrating a multi-qubit gate in the near future. We conclude by discussing the possibilities for larger-scale quantum computation by combining microfabricated traps and microwave control.
We present the design, fabrication, and characterization of a monolithic, segmented, three-dimensional linear Paul ion trap for quantum science applications. The trap is fabricated from a single fused-silica block using selective laser-induced etching (SLE) and is subsequently metallized, forming electrodes isolated by self-shadowing trench structures without the need for layer alignment or external shadow masks. The segmented electrodes allow for shaping of the axial potential, enabling the creation of anharmonic potential wells, such as those required for equidistant ion strings. In addition, they enable shuttling and splitting of ion chains. We discuss key design choices and SLE-imposed constraints on achievable feature sizes, and evaluate electron-beam evaporation and magnetron sputtering as metallization approaches. Across two independent experimental setups, we demonstrate stable trapping and control of linear chains of up to 33 40^{40}40Ca+^++ ions, including approximately equally spaced configurations. The measured secular frequencies in both traps agree with boundary-element simulations at the percent level, with residual deviations attributed to stray electric fields in the presence of anharmonic axial potentials, rather than fabrication imperfections. We measure axial micromotion field strengths on the order of 100 V/m along the trap axis, in approximate agreement with simulations. For radial mode frequencies near 2 MHz and an ion-electrode distance of 300 um, we measure heating rates of the order of 10 quanta/s in all but one motional mode, which is elevated by a technical noise source. The presented trap design is thus suitable for a wide range of quantum science applications and demonstrates the viability of SLE for the fabrication of finely segmented, monolithic, three-dimensional ion traps.
Recent advances in quantum information processing with trapped ions have demonstrated the need for new ion trap architectures capable of holding and manipulating chains of many (>10) ions. Here we present the design and detailed characterization of a new linear trap, microfabricated with scalable complementary metal-oxide-semiconductor (CMOS) techniques, that is well-suited to this challenge. Forty-four individually controlled dc electrodes provide the many degrees of freedom required to construct anharmonic potential wells, shuttle ions, merge and split ion chains, precisely tune secular mode frequencies, and adjust the orientation of trap axes. Microfabricated capacitors on dc electrodes suppress radio-frequency pickup and excess micromotion, while a top-level ground layer simplifies modeling of electric fields and protects trap structures underneath. A localized aperture in the substrate provides access to the trapping region from an oven below, permitting deterministic loading of particular isotopic/elemental sequences via species-selective photoionization. The shapes of the aperture and radio-frequency electrodes are optimized to minimize perturbation of the trapping pseudopotential. Laboratory experiments verify simulated potentials and characterize trapping lifetimes, stray electric fields, and ion heating rates, while measurement and cancellation of spatially-varying stray electric fields permits the formation of nearly-equally spaced ion chains.
Microfabricated ion traps are an important tool in the development of scalable quantum systems. Tremendous advancements towards an ion quantum computer were made in the past decade and most requirements for a quantum computer have been fulfilled in individual experiments. Incorporating all essential capabilities in a fully scalable system will require the further advancement of established quantum information technologies and development of new trap fabrication techniques. In my thesis I will discuss the theoretical background and experimental setup required for the operation of ion traps. Measurement of the important ion trap heating rate was performed in the setup and I will discuss the results in more detail. I will give a review of microfabrication processes used for the fabrication of traps, outlining advantages, disadvantages and issues inherent to the processes. Following the review I will present my work on a concept for a scalable ion trap quantum system based on microwave quantum gates and shuttling through X-junctions. Many of the required building blocks, including ion trap structures with current-carrying wires intended to create strong magnetic field gradients for microwave gates were investigated further. A novel fabrication process was developed to combine current-carrying wires with advanced multilayered ion trap structures. Several trap designs intended for proof of principle experiments of high fidelity microwave gates, advanced detection techniques and shuttling between electrically disconnected ion traps will be presented. Also the electrode geometry of an optimized X-junction design with strongly suppressed rf barrier height will be presented. Further, I developed several modifications for the experimental setup to extend the existing capabilities. A plasma source capable of performing in-situ cleans of the trap electrode surfaces, which has been demonstrated to dramatically reduce the heating rate in ion traps, was incorporated. I will also present a vacuum system modification designed to cool ion traps with current-carrying wires and transport the generated heat out of the vacuum system. In addition a novel low-noise, high-speed, multichannel voltage control system was developed by me. The device can be used in future experiments to precisely shuttle ions from one trapping zone to another and also to shuttle ions through ion trap junctions. Lastly I will outline the process optimization and microfabrication of my ion trap designs. A novel fabrication process which makes use of the extremely high thermal conductivity of diamond substrates and combines it with thick copper tracks embedded in the substrate was developed. Large currents will be passed through the wires creating a strong and controllable magnetic field gradient. Ion trap designs with isolated electrodes connected via buried wires can be placed on top of the current-carrying wires, allowing the most advanced electrode designs to be fabricated with current-carrying wires.