Implementing segmented ion trap designs for quantum computing

Gergely Imreh

Published Jan 1, 2008• 5 citations

Abstract

With all the key elements of quantum computing in ion traps demonstrated by the research community, the focus is now placed on building more sophisticated traps with larger numbers of ions to allow practical scale information processing. One promising avenue is to store ions in and shuttle them between many independent traps which serve as potential interaction sites. The core of the work described in this thesis is the experimental evaluation of a microfabricated segmented ion trap, built by Sandia National Laboratories ("Sandia trap"). These experiments required construction of a wholly new optical setup including laser and detection systems, a vacuum system and control electronics. Among our experimental achievements were: successful loading of single and pairs of ions in the microscale trap, measurement of ion storage lifetime, measurement of the motional heating rate with a time-resolved Doppler-cooling method — which showed above than average heating, and implemented a single-ion shuttling method — which reliably transferred the ion through a distance of 360 μm (two DC electrode widths away) and back. These results have been used to improve the next version of the Sandia trap design. We also used computer modelling to study several aspects of ion traps: a mesoscopic ion trap designed for fast ion separation, simulated ion loading to quantify requirements for successful trapping in small and shallow traps, and analyzed a precise shuttling method — where the time dependence of the trapping potential is engineered such that there is minimal motional heating. The results show that ion trap arrays at the 100 μm distance scale are feasible and suggests that such multiple trap designs merit further study.

DOI: 10.5287/ora-x577oe55z

Related papers

Surface-electrode ion traps for scalable quantum computing

D. T. C. Allcock

The major challenges in trapped-ion quantum computation are to scale up few-ion experiments to many qubits and to improve control techniques so that quantum logic gates can be carried out with higher fidelities. This thesis reports experimental progress in both of these areas. In the early part of the thesis we describe the fabrication of a surface-electrode ion trap, the development of the apparatus and techniques required to operate it and the successful trapping of 40Ca+ ions. Notably we developed methods to control the orientation of the principal axes and to minimise ion micromotion. We propose a repumping scheme that simplifies heating rate measurements for ions with low-lying D levels, and use it to characterise the electric field noise in the trap. Surface-electrode traps are important because they offer a route to dense integration of electronic and optical control elements using existing microfabrication technology. We explore this scaling route by testing a series of three traps that were microfabricated at Sandia National Laboratories. Investigations of micromotion and charging of the surface by laser beams were carried out and improvements to future traps are suggested. Using one of these traps we also investigated anomalous electrical noise from the electrode surfaces and discovered that it can be reduced by cleaning with a pulsed laser. A factor of two decrease was observed; this represents the first in situ removal of this noise source, an important step towards higher gate fidelities. In the second half of the thesis we describe the design and construction of an experiment for the purpose of replacing laser-driven multi-qubit quantum logic gates with microwave-driven ones. We investigate magnetic-field-independent hyperfine qubits in 40Ca+ as suitable qubits for this scheme. We make a design study of how best to integrate an ion trap with the microwave conductors required to implement the gate and propose a novel integrated resonant structure. The trap was fabricated and ions were successfully loaded. Single-qubit experiments show that the microwave fields above the trap are in excellent agreement with software simulations. There are good prospects for demonstrating a multi-qubit gate in the near future. We conclude by discussing the possibilities for larger-scale quantum computation by combining microfabricated traps and microwave control.

Jan 1, 20115 citations

Ytterbium ion trapping and microfabrication of ion trap arrays

R. C. Sterling

Over the past 15 years ion traps have demonstrated all the building blocks required of a quantum computer. Despite this success, trapping ions remains a challenging task, with the requirement for extensive laser systems and vacuum systems to perform operations on only a handful of qubits. To scale these proof of principle experiments into something that can outperform a classical computer requires an advancement in the trap technologies that will allow multiple trapping zones, junctions and utilize scalable fabrication technologies. I will discuss the construction of an ion trapping experiment, focussing on my work towards the laser stabilization and ion trap design but also covering the experimental setup as a whole. The vacuum system that I designed allows the mounting and testing of a variety of ion trap chips, with versatile optical access and a fast turn around time. I will also present the design and fabrication of a microfabricated Y junction and a 2- dimensional ion trap lattice. I achieve a suppression of barrier height and small variation of secular frequency through the Y junction, aiding to the junctions applicability to adiabatic shuttling operations. I also report the design and fabrication of a 2-D ion trap lattice. Such structures have been proposed as a means to implement quantum simulators and to my knowledge is the first microfabricated lattice trap. Electrical testing of the trap structures was undertaken to investigate the breakdown voltage of microfabricated structures with both static and radio frequency voltages. The results from these tests negate the concern over reduced rf voltage breakdown and in fact demonstrates breakdown voltages significantly above that typically required for ion trapping. This may allow ion traps to be designed to operate with higher voltages and greater ion-electrode separations, reducing anomalous heating. Lastly I present my work towards the implementation of magnetic fields gradients and microwaves on chip. This may allow coupling of the ions internal state to its motion using microwaves, thus reducing the requirements for the use of laser systems.

Jun 11, 20122 citations

Fabrication and Characterization of Semiconductor Ion Traps for Quantum Information Processing.

Daniel Stick

The electromagnetic manipulation of isolated ions has led to many advances in atomic physics, from laser cooling to precision metrology and quantum control. As technical capability in this area has grown, so has interest in building miniature electromagnetic traps for the development of large-scale quantum information processors. This thesis will primarily focus on using microfabrication techniques to build arrays of miniature ion traps, similar to techniques used in fabricating high component density microprocessors. A specific focus will be on research using a gallium arsenide/aluminum gallium arsenide heterostructure as a trap architecture, as well as the recent testing of different ion traps fabricated at outside foundries. The construction and characterization of a conventional ceramic trap capable of shuttling an ion through a junction will also be detailed, and reveal the need for moving towards lithographically fabricated traps. Combined, these serve as a set of proof-of-principle experiments pointing to methods for designing and building large scale arrays of ion traps capable of constituting a quantum information processor. As traps become smaller, electrical potentials on the electrodes have greater influence on the ion. This not only pertains to intentionally applied voltages, but also to deleterious noise sources, such as thermal Johnson noise and the more significant ``patch potential" noise, which both cause motional heating of the ion. These problematic noise sources dovetail with my thesis research into trap miniaturization since their effects become more pronounced and impossible to ignore for small trap sizes. Therefore characterizing them and investigating ways to suppress them have become an important component of my research. I will describe an experiment using a pair of movable needle electrodes to measure the ion heating rate corresponding to the harmonic frequency of the trap, the ion-electrode distance, and the electrode temperature. This information is used for characterizing the fluctuating potentials and exploring the possibility of suppressing motional heating by cooling the trap electrodes. This source of noise is also observed in other systems, and its characterization could potentially improve other precision experiments, such as those measuring deviations in the gravitational inverse square law with proximate masses.

Jan 1, 20073 citations

Development of microfabricated ion traps for scalable microwave quantum technology

Bjoern Lekitsch

Microfabricated ion traps are an important tool in the development of scalable quantum systems. Tremendous advancements towards an ion quantum computer were made in the past decade and most requirements for a quantum computer have been fulfilled in individual experiments. Incorporating all essential capabilities in a fully scalable system will require the further advancement of established quantum information technologies and development of new trap fabrication techniques. In my thesis I will discuss the theoretical background and experimental setup required for the operation of ion traps. Measurement of the important ion trap heating rate was performed in the setup and I will discuss the results in more detail. I will give a review of microfabrication processes used for the fabrication of traps, outlining advantages, disadvantages and issues inherent to the processes. Following the review I will present my work on a concept for a scalable ion trap quantum system based on microwave quantum gates and shuttling through X-junctions. Many of the required building blocks, including ion trap structures with current-carrying wires intended to create strong magnetic field gradients for microwave gates were investigated further. A novel fabrication process was developed to combine current-carrying wires with advanced multilayered ion trap structures. Several trap designs intended for proof of principle experiments of high fidelity microwave gates, advanced detection techniques and shuttling between electrically disconnected ion traps will be presented. Also the electrode geometry of an optimized X-junction design with strongly suppressed rf barrier height will be presented. Further, I developed several modifications for the experimental setup to extend the existing capabilities. A plasma source capable of performing in-situ cleans of the trap electrode surfaces, which has been demonstrated to dramatically reduce the heating rate in ion traps, was incorporated. I will also present a vacuum system modification designed to cool ion traps with current-carrying wires and transport the generated heat out of the vacuum system. In addition a novel low-noise, high-speed, multichannel voltage control system was developed by me. The device can be used in future experiments to precisely shuttle ions from one trapping zone to another and also to shuttle ions through ion trap junctions. Lastly I will outline the process optimization and microfabrication of my ion trap designs. A novel fabrication process which makes use of the extremely high thermal conductivity of diamond substrates and combines it with thick copper tracks embedded in the substrate was developed. Large currents will be passed through the wires creating a strong and controllable magnetic field gradient. Ion trap designs with isolated electrodes connected via buried wires can be placed on top of the current-carrying wires, allowing the most advanced electrode designs to be fabricated with current-carrying wires.

May 18, 20150 citations

Characterization of Microfabricated Surface Ion Traps.

Craig Hogle

Current classical computing methods are unable to simulate quantum many-body interactions efficiently.Analog quantum simulators with even small numbers of quantum degrees of freedom are expected to enable the investigation of systems not fully accessible in traditional computing such as condensed-matter systems, quantum chemistry, and material science.Two-dimensional lattices of trapped ions are a good candidate to realize an analog quantum simulator for their addressability, individual control and individual detection.Here, we report on multiple unique lattice surface ion trap designs, microfabricated at Sandia National Laboratories, capable of trapping and interacting up to 4 ions.Ions are held in close proximity in individual all radio-frequency potential minima and interact via their Coulomb repulsion.The Coulomb coupling between ions allows for simulation of spin-spin interactions 1-6 .Control electrodes of the trap can be used to adjust principal axes of the ion's motion and thus enable individual control over the interaction between ions.The lattice trap array architecture tested in this work can be scaled to larger two-dimensional lattices of trapped ions.

Jul 4, 20180 citations

Quantum State Manipulation and Dynamics in Micro Ion Traps

Frank Ziesel

The outstanding degree of control over trapped ions in Paul traps gives rise to the development of novel quantum manipulation techniques. Optical transitions can be used for precise manipulation of internal and external states. This way, non-classical states can be created which are a key component of quantum algorithms based on quantum logic operations. This powerful optical toolbox enabled the trapped ion system to assume leadership in the field of quantum computation. This thesis addresses two major challenges in the field of micro ion trap quantum optics. The temperature dependence of the heating rate from the ion trap surface is analysed in a novel cryogenic micro ion trap. Furthermore segmented traps allow state manipulations by time dependent electrical potentials, generated by the control voltages. These electrical fields provide a fast and reliable control handle to the ions external degrees of freedom. Quantum computation in Paul trap arrays is based on a combination of ion crystal transport, splitting and merging operations, while laser driven quantum state manipulations are mainly carried out on small ion crystals. Within this thesis a basic building block was realised by performing transport operations with a single ground-state cooled ion. As a highlight of experimental achievements, shuttling in the non-adiabatic regime, on the timescale of the motional period was demonstrated with low residual energy transfer. For his endeavour a specialised low noise arbitrary function generator was designed and manufactured during this thesis. Arbitrary voltage ramps at a sampling rate of up to 2.5 MS/s on up to 12 channels allow the study of a novel excitation method by directly manipulating the ion using electrical forces. Accurate numerical simulations in combination with the fast high resolution voltage supply allow deterministic quantum manipulations via momentum kicks. I report the first experimental demonstration of displaced number states with trapped ions.

Jan 1, 20120 citations