Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2601.23277

Understanding multiscale disorder in superconducting nanowire single photon detectors

Nirjhar Sarkar, Ronan Gourgues, Yueh-Chun Wu, Chengyun Hua, Katyayani Seal, Andreas Fognini, Steven Randolph, Eugene Dumitrescu, Gabor B. Halasz, Benjamin Lawrie

quant-phSubmitted Jan 30, 2026• Announced Feb 2, 2026• 0 citations
arXivHTMLPDF

Abstract

Superconducting nanowire single-photon detectors are central to applications across quantum information science. Yet, their performance is limited by the effects of disorder and electrodynamic inhomogeneities that are not well understood. By combining DC transport, dark-count measurements, and bias-dependent microwave transmission spectroscopy in the presence of controlled nanoscale disorder introduced through helium-ion irradiation, we distinguish local instability-driven processes from intrinsic superconducting depairing and kinetic inductance nonlinearities. This approach enables systematic tuning of kinetic inductance, depairing currents, microwave dissipation, and mode structure within a single device. Bias- and temperature-dependent resonance shifts quantify disorder-induced modifications of the superconducting density of states through the nonlinear kinetic inductance, while the emergence of multiple resonant modes reveals the formation of electrodynamically distinct superconducting regions. Comparing depairing under current, field, and temperature isolates the dominant microwave loss mechanisms, separating vortex, quasiparticle, and two-level-system contributions, thus providing a robust multifunctional foundation for disorder engineering of superconducting nanowire detectors and resonators.

Related papers

Determining the depairing current in superconducting nanowire single-photon detectors

Simone Frasca, Boris A. Korzh, Marco Colangelo +12 more

This work presents a method to estimate experimentally the superconducting depairing current of ultrathin films by means of nanowire-style resonators. Measuring the depairing current allows for a better determination of the figure of merit for the quality of superconducting nanowires. The resonance is set by impedance mismatch between the nanowire and the transmission line. Bias current dependent shifts in the measured resonant frequency correspond to the change in the kinetic inductance, which can be compared with theoretical predictions to estimate the resonator superconducting depairing current. The experiments lead to an unexpected and original result - a decrease of the switching-to-depairing current ratio with increasing temperature.

arXiv:1904.08596•Physical review. B./Physical review. B•Aug 30, 2019•50 citations

Demonstration of Microwave Multiplexed Readout of DC-Biased Superconducting Nanowire Detectors

Sinclair, AK, Schroeder, E, Di Zhu +5 more

© 2002-2011 IEEE. Superconducting nanowires are widely used as sensitive single photon detectors with wide spectral coverage and high timing resolution. We describe a demonstration of an array of dc-biased superconducting nanowire single photon detectors read out with a microwave multiplexing circuit. In this design, each individual nanowire is part of a resonant LC circuit where the inductance is dominated by the kinetic inductance of the nanowire. The circuit also contains two parallel plate capacitors, one of them is in parallel with the inductor and the other is coupled to a microwave transmission line that carries the signals to a cryogenic low-noise amplifier. All of the nanowires are connected via resistors to a single dc bias line that enables the nanowires to be current biased close to their critical current. When a photon hits a nanowire, it creates a normal hotspot that produces a voltage pulse across the LC circuit. This pulse rings down at the resonant frequency of the LC circuit over a time period that is fixed by the quality factor. We present measurements of an array of these devices and an evaluation of their performance in terms of frequency and time response.

•Jan 1, 2019•14 citations

Demonstration of Microwave Multiplexed Readout of DC-Biased Superconducting Nanowire Detectors

A. K. Sinclair, E. Schroeder, Di Zhu +5 more

Superconducting nanowires are widely used as sensitive single photon detectors with wide spectral coverage and high timing resolution. We describe a demonstration of an array of dc-biased superconducting nanowire single photon detectors read out with a microwave multiplexing circuit. In this design, each individual nanowire is part of a resonant LC circuit where the inductance is dominated by the kinetic inductance of the nanowire. The circuit also contains two parallel plate capacitors, one of them is in parallel with the inductor and the other is coupled to a microwave transmission line that carries the signals to a cryogenic low-noise amplifier. All of the nanowires are connected via resistors to a single dc bias line that enables the nanowires to be current biased close to their critical current. When a photon hits a nanowire, it creates a normal hotspot that produces a voltage pulse across the LC circuit. This pulse rings down at the resonant frequency of the LC circuit over a time period that is fixed by the quality factor. We present measurements of an array of these devices and an evaluation of their performance in terms of frequency and time response.

arXiv:1905.06880•IEEE Transactions on Applied Superconductivity•Mar 8, 2019•26 citations

Current crowding–free superconducting nanowire single-photon detectors

Stefan Strohauer, Fabian Wietschorke, Christian Schmid +5 more

Detecting single photons is essential for applications such as dark matter detection, quantum science and technology, and biomedical imaging. Superconducting nanowire single-photon detectors (SNSPDs) excel in this task due to their near-unity detection efficiency, subhertz dark count rates, and picosecond timing jitter. However, a local increase of current density (current crowding) in the bends of meander-shaped SNSPDs limits these performance metrics. By locally irradiating the SNSPD’s straight segments with helium ions while leaving the bends unirradiated, we realize current crowding–free SNSPDs with simultaneously enhanced sensitivity: After irradiation with 800 ions nm −2 , locally irradiated SNSPDs showed a relative saturation plateau width of 37%, while fully irradiated SNSPDs reached only 10%. This larger relative plateau width allows operation at lower relative bias currents, thereby reducing the dark count rate while still detecting single photons efficiently. We achieve an internal detection efficiency of 94% with 7 mHz dark count rate near the onset of saturating detection efficiency for a wavelength of 780 nm.

arXiv:2407.14171•Science Advances•Mar 28, 2025•11 citations

Superinductance and fluctuating two-level systems: Loss and noise in disordered and non-disordered superconducting quantum devices

David Niepce

In this thesis, we first demonstrate that a disordered superconductor with high kinetic inductance can realise a microwave low-loss, non-dissipative circuit element with impedance greater than the quantum resistance. This element, known as a superinductor, can suppress the fluctuations of charge in a quantum circuit.For this purpose, we fabricated and characterised 20 nm thick, 40 nm wide niobium-nitride nanowires and determined the impedance to 6.795 kΩ. We demonstrate internal quality factors Qi = 2.5e4 in nanowire resonators at single photon excitation, which is significantly higher than values reported in devices with similar materials and geometries. Moreover, we show that the dominant dissipation in our nanowires is not an intrinsic property of the disordered films, but can instead be fully understood within the framework of two-level systems.To further characterise these losses, we then explore the geometrical scaling, toward nanowire dimensions, of dielectric losses in superconducting microwave resonators fabricated with the same techniques and from the same NbN thin-film as the nanowire superinductors. For this purpose, we perform an experimental and numerical study of dielectric loss at low temperatures. Using 3D finite-element simulation of the Maxwell--London equations, we compute the geometric filling factors of the lossy regions in our resonator structures and fit the experimental data to determine the intrinsic loss tangents of its interfaces and dielectrics. Finally, we study the effect of two-level systems on the performance of various superconducting quantum circuits. For this purpose, we measure coherence-time fluctuations in qubits and frequency fluctuations in resonators. In all devices, through statistical analysis, we identify the signature of individual Lorentzian fluctuators in the noise. We find that fluctuations in qubit relaxation are local to the qubit and are caused by instabilities of near-resonant two-level-systems. Furthermore, when examining the low-frequency noise of three different types of superconducting resonator - one NbN nanowire, one Al coplanar waveguide, and one Al 3D cavity - we observe a similar power-law dependence of the Lorentzian switching time and amplitude on the circulating power in the resonators, suggesting a common noise mechanism in the three different types of devices.

•Jan 1, 2020•2 citations

Waveform analysis of a large-area superconducting nanowire single photon detector

Claire E. Marvinney, Brian Lerner, Alexander A Puretzky +2 more

Abstract Superconducting nanowire single photon detectors (SNSPDs) are typically used as single-mode-fiber-coupled single-pixel detectors, but large area detectors are increasingly critical for applications ranging from microscopy to free-space quantum communications. However, the long meander-line length of such large-area SNSPDs results in a proportionately large kinetic inductance that affects the waveform generated by the device. Here, we explore changes in the rising edge of the readout pulse for a single-pixel large-area SNSPD as a function of the optical spot size on the detector and compare to the rising edge of the dark-count waveform. We observe a bimodal distribution of bright-count rise times and show that the probability of a slow rise time increases in the limit of large spot sizes, indicative of a position sensitive response. Additionally, in the limit of low bias currents, the dark-count readout pulse is most similar to the large spot-size bright-count readout pulse, which suggests that dark counts arise from locations spanning the device. These results are consistent with a simple model of traveling microwave modes excited by single photons incident at varying positions along the length of the nanowire.

arXiv:2006.00126•Superconductor Science and Technology•Dec 7, 2020•7 citations
Superconducting nanowire single-photon detectors are central to applications across quantum information science. Yet, their performance is limited by the effects of disorder and electrodynamic inhomogeneities that are not well understood. By combining DC transport, dark-count measurements, and bias-dependent microwave transmission spectroscopy in the presence of controlled nanoscale disorder introduced through helium-ion irradiation, we distinguish local instability-driven processes from intrinsic superconducting depairing and kinetic inductance nonlinearities. This approach enables systematic tuning of kinetic inductance, depairing currents, microwave dissipation, and mode structure within a single device. Bias- and temperature-dependent resonance shifts quantify disorder-induced modifications of the superconducting density of states through the nonlinear kinetic inductance, while the emergence of multiple resonant modes reveals the formation of electrodynamically distinct superconducting regions. Comparing depairing under current, field, and temperature isolates the dominant microwave loss mechanisms, separating vortex, quasiparticle, and two-level-system contributions, thus providing a robust multifunctional foundation for disorder engineering of superconducting nanowire detectors and resonators.
This work presents a method to estimate experimentally the superconducting depairing current of ultrathin films by means of nanowire-style resonators. Measuring the depairing current allows for a better determination of the figure of merit for the quality of superconducting nanowires. The resonance is set by impedance mismatch between the nanowire and the transmission line. Bias current dependent shifts in the measured resonant frequency correspond to the change in the kinetic inductance, which can be compared with theoretical predictions to estimate the resonator superconducting depairing current. The experiments lead to an unexpected and original result - a decrease of the switching-to-depairing current ratio with increasing temperature.
© 2002-2011 IEEE. Superconducting nanowires are widely used as sensitive single photon detectors with wide spectral coverage and high timing resolution. We describe a demonstration of an array of dc-biased superconducting nanowire single photon detectors read out with a microwave multiplexing circuit. In this design, each individual nanowire is part of a resonant LC circuit where the inductance is dominated by the kinetic inductance of the nanowire. The circuit also contains two parallel plate capacitors, one of them is in parallel with the inductor and the other is coupled to a microwave transmission line that carries the signals to a cryogenic low-noise amplifier. All of the nanowires are connected via resistors to a single dc bias line that enables the nanowires to be current biased close to their critical current. When a photon hits a nanowire, it creates a normal hotspot that produces a voltage pulse across the LC circuit. This pulse rings down at the resonant frequency of the LC circuit over a time period that is fixed by the quality factor. We present measurements of an array of these devices and an evaluation of their performance in terms of frequency and time response.
Superconducting nanowires are widely used as sensitive single photon detectors with wide spectral coverage and high timing resolution. We describe a demonstration of an array of dc-biased superconducting nanowire single photon detectors read out with a microwave multiplexing circuit. In this design, each individual nanowire is part of a resonant LC circuit where the inductance is dominated by the kinetic inductance of the nanowire. The circuit also contains two parallel plate capacitors, one of them is in parallel with the inductor and the other is coupled to a microwave transmission line that carries the signals to a cryogenic low-noise amplifier. All of the nanowires are connected via resistors to a single dc bias line that enables the nanowires to be current biased close to their critical current. When a photon hits a nanowire, it creates a normal hotspot that produces a voltage pulse across the LC circuit. This pulse rings down at the resonant frequency of the LC circuit over a time period that is fixed by the quality factor. We present measurements of an array of these devices and an evaluation of their performance in terms of frequency and time response.
Detecting single photons is essential for applications such as dark matter detection, quantum science and technology, and biomedical imaging. Superconducting nanowire single-photon detectors (SNSPDs) excel in this task due to their near-unity detection efficiency, subhertz dark count rates, and picosecond timing jitter. However, a local increase of current density (current crowding) in the bends of meander-shaped SNSPDs limits these performance metrics. By locally irradiating the SNSPD’s straight segments with helium ions while leaving the bends unirradiated, we realize current crowding–free SNSPDs with simultaneously enhanced sensitivity: After irradiation with 800 ions nm −2 , locally irradiated SNSPDs showed a relative saturation plateau width of 37%, while fully irradiated SNSPDs reached only 10%. This larger relative plateau width allows operation at lower relative bias currents, thereby reducing the dark count rate while still detecting single photons efficiently. We achieve an internal detection efficiency of 94% with 7 mHz dark count rate near the onset of saturating detection efficiency for a wavelength of 780 nm.
In this thesis, we first demonstrate that a disordered superconductor with high kinetic inductance can realise a microwave low-loss, non-dissipative circuit element with impedance greater than the quantum resistance. This element, known as a superinductor, can suppress the fluctuations of charge in a quantum circuit.For this purpose, we fabricated and characterised 20 nm thick, 40 nm wide niobium-nitride nanowires and determined the impedance to 6.795 kΩ. We demonstrate internal quality factors Qi = 2.5e4 in nanowire resonators at single photon excitation, which is significantly higher than values reported in devices with similar materials and geometries. Moreover, we show that the dominant dissipation in our nanowires is not an intrinsic property of the disordered films, but can instead be fully understood within the framework of two-level systems.To further characterise these losses, we then explore the geometrical scaling, toward nanowire dimensions, of dielectric losses in superconducting microwave resonators fabricated with the same techniques and from the same NbN thin-film as the nanowire superinductors. For this purpose, we perform an experimental and numerical study of dielectric loss at low temperatures. Using 3D finite-element simulation of the Maxwell--London equations, we compute the geometric filling factors of the lossy regions in our resonator structures and fit the experimental data to determine the intrinsic loss tangents of its interfaces and dielectrics. Finally, we study the effect of two-level systems on the performance of various superconducting quantum circuits. For this purpose, we measure coherence-time fluctuations in qubits and frequency fluctuations in resonators. In all devices, through statistical analysis, we identify the signature of individual Lorentzian fluctuators in the noise. We find that fluctuations in qubit relaxation are local to the qubit and are caused by instabilities of near-resonant two-level-systems. Furthermore, when examining the low-frequency noise of three different types of superconducting resonator - one NbN nanowire, one Al coplanar waveguide, and one Al 3D cavity - we observe a similar power-law dependence of the Lorentzian switching time and amplitude on the circulating power in the resonators, suggesting a common noise mechanism in the three different types of devices.
Abstract Superconducting nanowire single photon detectors (SNSPDs) are typically used as single-mode-fiber-coupled single-pixel detectors, but large area detectors are increasingly critical for applications ranging from microscopy to free-space quantum communications. However, the long meander-line length of such large-area SNSPDs results in a proportionately large kinetic inductance that affects the waveform generated by the device. Here, we explore changes in the rising edge of the readout pulse for a single-pixel large-area SNSPD as a function of the optical spot size on the detector and compare to the rising edge of the dark-count waveform. We observe a bimodal distribution of bright-count rise times and show that the probability of a slow rise time increases in the limit of large spot sizes, indicative of a position sensitive response. Additionally, in the limit of low bias currents, the dark-count readout pulse is most similar to the large spot-size bright-count readout pulse, which suggests that dark counts arise from locations spanning the device. These results are consistent with a simple model of traveling microwave modes excited by single photons incident at varying positions along the length of the nanowire.