Quantum error mitigation (QEM) infers noiseless expectation values from noisy variants of a target quantum circuit. Unlike quantum error correction, QEM requires no additional hardware resources and is therefore routinely employed in experiments on contemporary quantum processors. QEM strategies based on agnostic noise amplification (ANA) are intrinsically resilient to temporal noise drift during the execution of the experiment, but their sampling cost (runtime overhead) remains a major practical bottleneck. In this work, we introduce the virtual noise scaling framework and combine it with layered mitigation to further enhance performance. While virtual noise scaling consistently reduces sampling overhead, we identify a specific noise threshold for the layered mitigation approach. When the noise level is above this threshold, layered mitigation decreases the sampling overhead; conversely, when below it, the overhead increases. Notably, this threshold is circuit-independent and depends solely on the number of layers. For strong noise, the combination of virtual noise scaling and layered mitigation yields several orders of magnitude reduction in sampling overhead compared with conventional zero-noise extrapolation post-processing. As a result, mitigation tasks that once seemed unrealistic are now challenging but achievable. The proposed approach is compatible with dynamic circuits and can be seamlessly integrated with error detection and quantum error correction schemes. In addition, it is also applicable to ANA-based mitigation of mid-circuit measurements and preparation errors. Our findings extend to any constant-step amplification factors and therefore also apply to probabilistic error amplification (PEA) QEM. We validate our post-processing approach by applying it to previously reported experimental data, where we observe a substantial improvement in mitigation efficiency and accuracy.
Comments
Added a new section relevant to PEA. A few typos in equations were fixed
Quantum error mitigation (QEM) infers noiseless expectation values from noisy variants of a target quantum circuit. Unlike quantum error correction, QEM requires no additional hardware resources and is therefore routinely employed in experiments on contemporary quantum processors. QEM strategies based on agnostic noise amplification (ANA) are intrinsically resilient to temporal noise drift during the execution of the experiment, but their sampling cost (runtime overhead) remains a major practical bottleneck. In this work, we introduce the virtual noise scaling framework and combine it with layered mitigation to further enhance performance. While virtual noise scaling consistently reduces sampling overhead, we identify a specific noise threshold for the layered mitigation approach. When the noise level is above this threshold, layered mitigation decreases the sampling overhead; conversely, when below it, the overhead increases. Notably, this threshold is circuit-independent and depends solely on the number of layers. For strong noise, the combination of virtual noise scaling and layered mitigation yields several orders of magnitude reduction in sampling overhead compared with conventional zero-noise extrapolation post-processing. As a result, mitigation tasks that once seemed unrealistic are now challenging but achievable. The proposed approach is compatible with dynamic circuits and can be seamlessly integrated with error detection and quantum error correction schemes. In addition, it is also applicable to ANA-based mitigation of mid-circuit measurements and preparation errors. Our findings extend to any constant-step amplification factors and therefore also apply to probabilistic error amplification (PEA) QEM. We validate our post-processing approach by applying it to previously reported experimental data, where we observe a substantial improvement in mitigation efficiency and accuracy.
Quantum Error Mitigation is essential for enhancing the reliability of quantum computing experiments. The adaptive KIK error mitigation method has demonstrated significant advantages, including resilience to temporal noise drifts, applicability to non-Clifford gates, and guaranteed performance bounds. However, its reliance on global noise amplification introduces limitations, such as incompatibility with mid-circuit measurements and dynamic circuits, as well as small residual errors due to unaccounted high-order Magnus noise terms. In this work, we propose a layer-based noise amplification approach that overcomes these challenges without incurring additional overhead or experimental complexity. Since the Layered KIK method is inherently compatible with mid-circuit measurements, it enables seamless integration with quantum error correction codes. This synergy allows error correction to address dominant noise mechanisms, while the Layered KIK suppresses residual errors arising from leakage and correlated noise sources. Similarly, for reducing sampling costs, Layered KIK can be combined with complementary mitigation methods for providing drift resilience and broadening the range of addressable errors.
The pursuit of practical quantum utility on near-term quantum processors is critically challenged by their inherent noise. Quantum error mitigation (QEM) techniques are leading solutions to improve computation fidelity with relatively low qubit-overhead, while full-scale quantum error correction remains a distant goal. However, QEM techniques incur substantial measurement overheads, especially when applied to families of quantum circuits parameterized by classical inputs. Focusing on zero-noise extrapolation (ZNE), a widely adopted QEM technique, here we devise the surrogate-enabled ZNE (S-ZNE), which leverages classical learning surrogates to perform ZNE entirely on the classical side. Unlike conventional ZNE, whose measurement cost scales linearly with the number of circuits, S-ZNE requires only constant measurement overhead for an entire family of quantum circuits, offering superior scalability. Theoretical analysis indicates that S-ZNE achieves accuracy comparable to conventional ZNE in many practical scenarios, and numerical experiments on up to 100-qubit ground-state energy and quantum metrology tasks confirm its effectiveness. Our approach provides a template that can be effectively extended to other quantum error mitigation protocols, opening a promising path toward scalable error mitigation.
Quantum Error Mitigation is essential for enhancing the reliability of quantum computing experiments. The adaptive KIK error mitigation method has demonstrated significant advantages, including resilience to temporal noise drifts, applicability to non-Clifford gates, and guaranteed performance bounds. However, its reliance on global noise amplification introduces limitations, such as incompatibility with mid-circuit measurements and dynamic circuits, as well as small residual errors due to unaccounted high-order Magnus noise terms. In this work, we propose a layer-based noise amplification approach that overcomes these challenges without incurring additional overhead or experimental complexity. Since the Layered KIK method is inherently compatible with mid-circuit measurements, it enables seamless integration with quantum error correction codes. This synergy allows error correction to address dominant noise mechanisms, while the Layered KIK suppresses residual errors arising from leakage and correlated noise sources. Similarly, for reducing sampling costs, Layered KIK can be combined with complementary mitigation methods for providing drift resilience and broadening the range of addressable errors.
We present a simple, malleable and low-overhead approach for improving generic biased quantum error mitigation (QEM) methods, achieving up to 15% fidelity improvements over standard QEM on 100-qubit circuits with up to 2000 entangling gates. We do so by constructing verifiable benchmark circuits which mirror the application circuit's native-gate structure and thus noise profile. These circuits can be used to benchmark and mitigate the bias of the underlying error mitigation method, requiring only the application circuit and hardware native gate set. We present two methods for generating benchmark circuits; one is agnostic to the target hardware at the expense of a small overhead of single-qubit gates, while the other is specific to the IBM superconducting hardware and has no gate overhead. As a corollary, we introduce benchmarked-noise zero-noise extrapolation (bnZNE) as a simple adaptation of zero-noise extrapolation (ZNE), one of the most popular error mitigation methods. We consider as an example the bias-mitigated ZNE and bnZNE of Trotterized Hamiltonian simulations, observing that our approaches outperform standard ZNE using both small-scale classical simulations and 100-qubit utility-scale experiments on the IBM superconducting hardware. We consider the measurement of both single-site observables as well as two-site correlations along a one-dimensional qubit chain. We also provide a software package for implementing the error mitigation techniques used in this research.
We experimentally study error mitigation and finite-shot sampling on superconducting quantum hardware under a constrained execution budget. The study combines calibration-aware qubit selection, circuit-depth scaling, zero-noise extrapolation, dynamical decoupling, readout-error mitigation, and repeated-shot estimation on an IBM Quantum processor. Experiments are organized across ideal simulation, noise-model simulation, and physical-device execution to separate sampling uncertainty from device-induced error. We investigate how mitigation performance changes with circuit depth, effective noise scale, qubit connectivity, and measurement budget, and quantify accuracy using expectation-value error, mean-squared error, statistical uncertainty, and mitigation gain. A fixed hardware-execution budget is used to evaluate shot allocation strategies and repeated measurements without relying on unlimited sampling. The resulting analysis provides a hardware-aware characterization of when mitigation improves expectation-value estimation and when finite-shot fluctuations offset the benefit of additional mitigation overhead. The implementation uses contemporary Qiskit and IBM Quantum Runtime workflows and is designed to provide reproducible experimental evidence for error-mitigation studies on current quantum processors.
Abstract The pursuit of practical quantum utility on near-term quantum processors is critically challenged by their inherent noise. Quantum error mitigation (QEM) techniques are leading solutions to improve computation fidelity with relatively low qubit-overhead, while full-scale quantum error correction remains a distant goal. However, QEM techniques incur substantial measurement overheads, especially when applied to families of quantum circuits parameterized by classical inputs. Focusing on zero-noise extrapolation (ZNE), a widely adopted QEM technique, here we devise the surrogate-enabled ZNE (S-ZNE), which leverages classical learning surrogates to perform ZNE entirely on the classical side. Unlike conventional ZNE, whose measurement cost scales linearly with the number of circuits, S-ZNE requires only constant measurement overhead for an entire family of quantum circuits, offering superior scalability. Theoretical analysis indicates that S-ZNE achieves accuracy comparable to conventional ZNE in many practical scenarios, and numerical experiments on up to 100-qubit ground-state energy and quantum metrology tasks confirm its effectiveness. Our approach provides a template that can be effectively extended to other quantum error mitigation protocols, opening a promising path toward scalable error mitigation.