Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2601.09969 · Applied Physics Reviews

Interfacing Superconductor and Semiconductor Digital Electronics

Yerzhan Mustafa, Selçuk Köse

physics.app-phcond-mat.supr-coneess.SYquant-phSubmitted Jan 15, 2026• Announced Jan 16, 2026• 0 citations
arXivHTMLPDF

Abstract

Interface circuits are the key components that enable the hybrid integration of superconductor and semiconductor digital electronics. The design requirements of superconductor-semiconductor interface circuits vary depending on the application, such as high-performance classical computing, superconducting quantum computing, and digital signal processing. In this survey, various interface circuits are categorized based on the working principle and structure. The superconducting output drivers are explored, which are capable of converting and amplifying, e.g., single flux quantum (SFQ) voltage pulses, to voltage levels that semiconductor circuits can process. Several trade-offs between circuit- and system-level design parameters are examined. Accordingly, parameters such as the data rate, output voltage, power dissipation, layout area, thermal/heat load of cryogenic cables, and bit-error rate are considered.

Journal reference
Y. Mustafa, S. Köse; Interfacing superconductor and semiconductor digital electronics: A review of superconducting output drivers. Appl. Phys. Rev. 1 September 2026; 13 (3): 031332
DOI
10.1063/5.0326611

Related papers

High-Speed Hybrid Superconductor-to-Semiconductor Interface Circuit With Ultra-Low Power Consumption

Thomas Ortlepp, Stephen R. Whiteley, Lizhen Zheng +2 more

Superconductor electronics for high-performance computing and high-speed analog-to-digital converters requires multi-channel digital data links. Most difficult is the amplification of the weak signals from the superconductor circuit to the volt level of semiconductor electronics. We developed a hybrid digital interface based on a Josephson latching driver, the so-called Suzuki stack, and a clocked CMOS comparator. The input can be directly triggered by a single flux quantum pulse and the output provides a 1 V CMOS-level signal. In contrast to existing systems, our interface is optimized for ultra-low-power consumption to enable its application for parallel multi-bit data interfaces. We provide evaluation of various types of Suzuki stacks and various CMOS comparators. We present experimental data on the delay of the overall hybrid interface and the total power consumption. The bit-error rate has been measured to be below 10-12. We will discuss the trade-off among circuit robustness, speed, and power consumption.

IEEE Transactions on Applied Superconductivity•Nov 14, 2012•21 citations

Digital Output Data Links From Superconductor Integrated Circuits

Deepnarayan Gupta, Saad M. Sarwana, Dmitri E. Kirichenko +7 more

Improving the efficiency in digital data transport, originating from 4 K superconductor integrated circuits (ICs) to standard room-temperature (300 K) electronics, both in terms of speed and power consumption, is vitally important for nearly all applications of superconductor digital electronics. The required data link must include all necessary amplification and conditioning to convert digital data from single flux quantum (SFQ) logic to standard CMOS logic levels. Therefore, one must minimize the overall power consumption for the required total data throughout by taking into account all parts of the link: (1) data transmitters or output drivers with SFQ input, (2) additional amplifiers, (3) transmission lines, and (4) data receivers at room-temperature, such as the ones available on commercial field-programmable gate arrays (FPGAs). Here, we describe two variants of electrical data links, with and without cryogenic semiconductor amplifiers.

IEEE Transactions on Applied Superconductivity•May 15, 2019•29 citations

A compact high frequency voltage amplifier for superconductor–semiconductor logic interface

Sasan Razmkhah, Ali Bozbey, Pascal Febvre

Abstract The many advantages of cryogenically cooled single-flux quantum (SFQ) circuits imply that the high speed and low voltage output signals must be amplified and interfaced with standard electronics. State-of-the-art low-noise and wide-band amplifiers are required to interface with room temperature electronics. One solution is to place preamplifiers at the cryogenic stage, which requires specific semiconductor design and fabrication. However, a more viable and energy-efficient approach is to integrate the pulsed logic circuit output stages with on-chip superconductor preamplifiers. We designed, fabricated, and tested an on-chip compact voltage multiplier integrated with the output stage of SFQ circuits to increase the voltage amplitude of SFQ pulses. The circuit is designed with the same technology as the logic circuit hence its noise level is lower, and it works at higher frequencies compared to complementary metal-oxide semi-conductor amplifiers and due to quantized nature of it there is no added noise. The fabricated circuit has a compact size of 160 µ m × 320 µ m and provides about 10 dB gain with measured 600 µ V output voltage at frequencies up to ∼25 GHz in simulations. By stacking more levels, over 20 dB gain at circuit level is achievable as shown in simulations. Moreover the gain of the superconductor voltage amplifier is quantized and programmable.

arXiv:2011.03625•Superconductor Science and Technology•Jan 22, 2021•11 citations

S-PAM: Superconductor-Semiconductor Interface Circuit with Pulse-Amplitude Modulation

Yerzhan Mustafa, Selçuk Köse

Superconductor-semiconductor interface circuits are integral part of connecting cryogenic classical and quantum computing systems with the room temperature electronics. Due to the cooling power constraints of cryogenic setups, the number of data transmission channels between temperature stages is often limited by the heat load of cables and connectors. As a result, a high data rate (throughput) per channel is desired for large-scale computing systems. The state-of-the-art superconductor-semiconductor interface circuits use a binary data format. In this work, a novel interface circuit is proposed that produces signals with pulse-amplitude modulation (PAM). As a case study, a PAM-4 SQUID (superconducting quantum interference device) stack interface circuit is developed. With four output voltage levels, the effective data rate can be doubled while keeping the same operating frequency. Alternatively, the number of cryogenic cables can be reduced by two times as compared to the conventional binary data links.

IEEE International Symposium on Circuits and Systems proceedings•May 25, 2025•3 citations

Superconductive electronics-a high speed and low power technology complementing III-V technologies for advanced systems

Michael Leung, J.W. Spargo, Kevin W. Kobayashi +1 more

Superconductive electronics offers a unique combination of high bandwidth and low power for mission critical hardware such as digital processors at 20 to 100 GHz, microwatt per bit analog to digital converters, large digital switches at multi-Gb/s data rates, and low noise parametric amplifiers. This cryogenic technology, typically operating at a few degrees or a few tens of degrees Kelvin, depends upon the unique physics of superconducting materials such as Nb, NbN, and YBaCuO, and the fundamental circuit element, the Josephson junction (JJ) to create unique architectures of unprecedented design efficiency and performance. These circuits are based on the single flux quantum (SFQ) logic family, a technology that has no parallel in semiconductor electronics. Digital data is transmitted by voltage pulses with amplitude less than 1 mV, but at extremely high speeds. Individual gates have been operated as high as 370 GHz. In this paper, we present a brief overview of superconductive digital technology, describe some recent circuits, and discuss how the challenges to superconductive technology are being met, including the use of multi-chip module (MCM) technology, and the potential use of III-V HBT and HEMT circuits to provide interface drivers and amplifiers, possibly operated cryogenically.

Technical digest -- IEEE Compound Semiconductor Integrated Circuit Symposium•Nov 23, 2002•1 citation

An ultrahigh-impedance superconducting thermal switch for interfacing superconductors to semiconductors and optoelectronics

Adam N. McCaughan, Varun Boehm Verma, Sonia Mary Buckley +5 more

A number of current approaches to quantum and neuromorphic computing use superconductors as the basis of their platform or as a measurement component, and will need to operate at cryogenic temperatures. Semiconductor systems are typically proposed as a top-level control in these architectures, with low-temperature passive components and intermediary superconducting electronics acting as the direct interface to the lowest-temperature stages. The architectures, therefore, require a low-power superconductor-semiconductor interface, which is not currently available. Here we report a superconducting switch that is capable of translating low-voltage superconducting inputs directly into semiconductor-compatible (above 1,000 mV) outputs at kelvin-scale temperatures (1 K or 4 K). To illustrate the capabilities in interfacing superconductors and semiconductors, we use it to drive a light-emitting diode (LED) in a photonic integrated circuit, generating photons at 1 K from a low-voltage input and detecting them with an on-chip superconducting single-photon detector. We also characterize our device's timing response (less than 300 ps turn-on, 15 ns turn-off), output impedance (greater than 1 MΩ), and energy requirements (0.18 fJ/um^2, 3.24 mV/nW).

arXiv:1903.10461•Mar 25, 2019•1 citation
Interface circuits are the key components that enable the hybrid integration of superconductor and semiconductor digital electronics. The design requirements of superconductor-semiconductor interface circuits vary depending on the application, such as high-performance classical computing, superconducting quantum computing, and digital signal processing. In this survey, various interface circuits are categorized based on the working principle and structure. The superconducting output drivers are explored, which are capable of converting and amplifying, e.g., single flux quantum (SFQ) voltage pulses, to voltage levels that semiconductor circuits can process. Several trade-offs between circuit- and system-level design parameters are examined. Accordingly, parameters such as the data rate, output voltage, power dissipation, layout area, thermal/heat load of cryogenic cables, and bit-error rate are considered.
Superconductor electronics for high-performance computing and high-speed analog-to-digital converters requires multi-channel digital data links. Most difficult is the amplification of the weak signals from the superconductor circuit to the volt level of semiconductor electronics. We developed a hybrid digital interface based on a Josephson latching driver, the so-called Suzuki stack, and a clocked CMOS comparator. The input can be directly triggered by a single flux quantum pulse and the output provides a 1 V CMOS-level signal. In contrast to existing systems, our interface is optimized for ultra-low-power consumption to enable its application for parallel multi-bit data interfaces. We provide evaluation of various types of Suzuki stacks and various CMOS comparators. We present experimental data on the delay of the overall hybrid interface and the total power consumption. The bit-error rate has been measured to be below 10-12. We will discuss the trade-off among circuit robustness, speed, and power consumption.
Improving the efficiency in digital data transport, originating from 4 K superconductor integrated circuits (ICs) to standard room-temperature (300 K) electronics, both in terms of speed and power consumption, is vitally important for nearly all applications of superconductor digital electronics. The required data link must include all necessary amplification and conditioning to convert digital data from single flux quantum (SFQ) logic to standard CMOS logic levels. Therefore, one must minimize the overall power consumption for the required total data throughout by taking into account all parts of the link: (1) data transmitters or output drivers with SFQ input, (2) additional amplifiers, (3) transmission lines, and (4) data receivers at room-temperature, such as the ones available on commercial field-programmable gate arrays (FPGAs). Here, we describe two variants of electrical data links, with and without cryogenic semiconductor amplifiers.
Abstract The many advantages of cryogenically cooled single-flux quantum (SFQ) circuits imply that the high speed and low voltage output signals must be amplified and interfaced with standard electronics. State-of-the-art low-noise and wide-band amplifiers are required to interface with room temperature electronics. One solution is to place preamplifiers at the cryogenic stage, which requires specific semiconductor design and fabrication. However, a more viable and energy-efficient approach is to integrate the pulsed logic circuit output stages with on-chip superconductor preamplifiers. We designed, fabricated, and tested an on-chip compact voltage multiplier integrated with the output stage of SFQ circuits to increase the voltage amplitude of SFQ pulses. The circuit is designed with the same technology as the logic circuit hence its noise level is lower, and it works at higher frequencies compared to complementary metal-oxide semi-conductor amplifiers and due to quantized nature of it there is no added noise. The fabricated circuit has a compact size of 160 µ m × 320 µ m and provides about 10 dB gain with measured 600 µ V output voltage at frequencies up to ∼25 GHz in simulations. By stacking more levels, over 20 dB gain at circuit level is achievable as shown in simulations. Moreover the gain of the superconductor voltage amplifier is quantized and programmable.
Superconductor-semiconductor interface circuits are integral part of connecting cryogenic classical and quantum computing systems with the room temperature electronics. Due to the cooling power constraints of cryogenic setups, the number of data transmission channels between temperature stages is often limited by the heat load of cables and connectors. As a result, a high data rate (throughput) per channel is desired for large-scale computing systems. The state-of-the-art superconductor-semiconductor interface circuits use a binary data format. In this work, a novel interface circuit is proposed that produces signals with pulse-amplitude modulation (PAM). As a case study, a PAM-4 SQUID (superconducting quantum interference device) stack interface circuit is developed. With four output voltage levels, the effective data rate can be doubled while keeping the same operating frequency. Alternatively, the number of cryogenic cables can be reduced by two times as compared to the conventional binary data links.
Superconductive electronics offers a unique combination of high bandwidth and low power for mission critical hardware such as digital processors at 20 to 100 GHz, microwatt per bit analog to digital converters, large digital switches at multi-Gb/s data rates, and low noise parametric amplifiers. This cryogenic technology, typically operating at a few degrees or a few tens of degrees Kelvin, depends upon the unique physics of superconducting materials such as Nb, NbN, and YBaCuO, and the fundamental circuit element, the Josephson junction (JJ) to create unique architectures of unprecedented design efficiency and performance. These circuits are based on the single flux quantum (SFQ) logic family, a technology that has no parallel in semiconductor electronics. Digital data is transmitted by voltage pulses with amplitude less than 1 mV, but at extremely high speeds. Individual gates have been operated as high as 370 GHz. In this paper, we present a brief overview of superconductive digital technology, describe some recent circuits, and discuss how the challenges to superconductive technology are being met, including the use of multi-chip module (MCM) technology, and the potential use of III-V HBT and HEMT circuits to provide interface drivers and amplifiers, possibly operated cryogenically.
A number of current approaches to quantum and neuromorphic computing use superconductors as the basis of their platform or as a measurement component, and will need to operate at cryogenic temperatures. Semiconductor systems are typically proposed as a top-level control in these architectures, with low-temperature passive components and intermediary superconducting electronics acting as the direct interface to the lowest-temperature stages. The architectures, therefore, require a low-power superconductor-semiconductor interface, which is not currently available. Here we report a superconducting switch that is capable of translating low-voltage superconducting inputs directly into semiconductor-compatible (above 1,000 mV) outputs at kelvin-scale temperatures (1 K or 4 K). To illustrate the capabilities in interfacing superconductors and semiconductors, we use it to drive a light-emitting diode (LED) in a photonic integrated circuit, generating photons at 1 K from a low-voltage input and detecting them with an on-chip superconducting single-photon detector. We also characterize our device's timing response (less than 300 ps turn-on, 15 ns turn-off), output impedance (greater than 1 MΩ), and energy requirements (0.18 fJ/um^2, 3.24 mV/nW).