Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Technical digest -- IEEE Compound Semiconductor Integrated Circuit Symposium

Superconductive electronics-a high speed and low power technology complementing III-V technologies for advanced systems

Michael Leung, J.W. Spargo, Kevin W. Kobayashi, Arnold H. Silver

Published Nov 23, 2002• 1 citation
Publisher

Abstract

Superconductive electronics offers a unique combination of high bandwidth and low power for mission critical hardware such as digital processors at 20 to 100 GHz, microwatt per bit analog to digital converters, large digital switches at multi-Gb/s data rates, and low noise parametric amplifiers. This cryogenic technology, typically operating at a few degrees or a few tens of degrees Kelvin, depends upon the unique physics of superconducting materials such as Nb, NbN, and YBaCuO, and the fundamental circuit element, the Josephson junction (JJ) to create unique architectures of unprecedented design efficiency and performance. These circuits are based on the single flux quantum (SFQ) logic family, a technology that has no parallel in semiconductor electronics. Digital data is transmitted by voltage pulses with amplitude less than 1 mV, but at extremely high speeds. Individual gates have been operated as high as 370 GHz. In this paper, we present a brief overview of superconductive digital technology, describe some recent circuits, and discuss how the challenges to superconductive technology are being met, including the use of multi-chip module (MCM) technology, and the potential use of III-V HBT and HEMT circuits to provide interface drivers and amplifiers, possibly operated cryogenically.

DOI
10.1109/gaas.1997.628252

Related papers

Superconducting digital circuits with low-T/sub c/ and high-T/sub c/ materials

J.H. Kang, John X. Przybysz, Donald L. Miller +1 more

The authors argue that superconducting digital electronics is the future trend for high-speed and low-power applications. Low-T/sub c/ technology based on stable Nb-AlO/sub x/-Nb tunneling junctions has been successful in constructing most of the digital circuit logic elements. A four-stage shift register constructed with latching logic operated up to 4 GHz with a power consumption of about 60 mu W per gate. A 12-b analog-digital coverter constructed with a single flux quantum (SFQ) logic showed proper operation with the total power dissipated being only about 100 mu W. Fabrication of Josephson tunneling junctions with high-T/sub c/ materials has been tougher than with low-T/sub c/ materials. However, recently developed very high speed rapid single flux quantum (RSFQ) logic circuits can be applied to weak link type junctions fabricated with YBa/sub 2/Cu/sub 3/O/sub 7-x/ films. Simulations of the various circuits with weak link type junctions, e.g., shift registers, analog-digital converters, etc., show fast operation and reasonable margins. Applications of similar concepts can be applied to NbN circuits operating at above 10 K.>

IEEE/Cornell Conference on Advanced Concepts in High Speed Semiconductor Devices and Circuits•Dec 9, 2002•0 citations

Superconducting digital electronics

H. Hayakawa, Nobuyuki Yoshikawa, Shinichi Yorozu +1 more

Single-flux quantum logic (SFQ) circuits, in which a flux quantum is used as an information carrier, have the possibility for opening the door to a new digital system operated at over 100-GHz clock frequency at extremely low power dissipation. The SFQ logic system is a so-called pulse logic, which is completely different from the level logic for semiconductors like CMOS, so circuit design technologies for SFQ logic circuits have to be newly developed. Recently, much progress in basic technologies for designing SFQ circuits and operating circuits at high speeds has been made. With advances in these design tools, large-scale circuits including more than several thousand junctions can be easily operated with the clock frequency of more than several tens of gigahertz. High-end routers and high-end computers are possible applications of SFQ logic circuits because of their high throughput nature and the low power dissipation of SFQ logic. In this paper, recent advances of SFQ circuit design technologies and recent developments of switches for high-end routers and microprocessors for high-end computers that are considered possible applications for SFQ logic will be described.

Proceedings of the IEEE•Sep 20, 2004•72 citations

Superconducting Digital Electronics Based on Single Flux Quantum

Hisao Hayakawa

Single flux quantum (SFQ) logic circuits, in which a single flux quantum is used for an information carrier, have a possibility to open a new digital system operated with over 100 GHz clock frequencies at extremely low power dissipations. Recently, much progress in basic technologies for designing SFQ circuits and operating circuits with high speeds has been done. By taking advancements in these designing tools, circuits including more than several thousands junctions easily operated with the clock frequency of more than several tens GHz. Applications of SFQ circuits such as high performance computers, high end router and high end servers are being developed in the world taking advantages of the high through-put nature and the low power dissipation of the SFQ logic.

Chinese Journal of Physics•Aug 1, 2004•0 citations

Superconductive single-flux quantum technology

Oleg A. Mukhanov

Key digital circuits for signal processing with tens of gigahertz speed and a few microwatts power dissipation have been recently demonstrated using a simple, 2 /spl mu/m linewidth process. These are the fastest digital circuits reported to date. These circuits use novel rapid single flux quantum (RSFQ) technology that takes advantage of the fundamental properties of superconductivity. In this technology, data and clock are picosecond-long quantized voltage pulses corresponding to the transfer of single magnetic flux quanta, /spl Phisub 0/=h/2e=2 mVps. These SFQ pulses are regenerated at each gate and are processed by circuits comprised of overdamped Josephson junctions interconnected via microstrip inductances. The inherent internal memory of all RSFQ gates (primarily flip-flops), combined with high switching speed, makes serial, bit-pipelined circuit design advantageous. This paper presents experiments in RSFQ digital circuits, including an N/spl times/8b serial multiplier, and on-chip test systems based on RSFQ shift registers and on SFQ samplers. They enable test and study of RSFQ circuits at full GHz speed while communicating with semiconductor electronics at low speed.>

Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference•Dec 17, 2002•8 citations

Interfacing Superconductor and Semiconductor Digital Electronics

Yerzhan Mustafa, Selçuk Köse

Interface circuits are the key components that enable the hybrid integration of superconductor and semiconductor digital electronics. The design requirements of superconductor-semiconductor interface circuits vary depending on the application, such as high-performance classical computing, superconducting quantum computing, and digital signal processing. In this survey, various interface circuits are categorized based on the working principle and structure. The superconducting output drivers are explored, which are capable of converting and amplifying, e.g., single flux quantum (SFQ) voltage pulses, to voltage levels that semiconductor circuits can process. Several trade-offs between circuit- and system-level design parameters are examined. Accordingly, parameters such as the data rate, output voltage, power dissipation, layout area, thermal/heat load of cryogenic cables, and bit-error rate are considered.

physics.app-phCross-listedarXiv:2601.09969•Applied Physics Reviews•Jan 16, 2026•0 citations

Superconducting digital electronics

Shuichi Tahara, Shinichi Yorozu, Y. Kameda +5 more

Superconducting devices have intrinsically superior characteristics to those of semiconductor devices. Presently, we can fabricate more than twenty thousand junctions on one chip using niobium technology. We have demonstrated the operation of a network system with a superconducting interconnection chip using voltage-state logic. Single flux quantum devices are promising for future superconducting applications because the clock frequency of SFQ logic is higher than that of voltage-state. We have proposed a high-end switch based on hybrid architecture using optical devices, semiconductors and SFQ devices. To demonstrate the high-speed operation of SFQ circuits, we developed an arbiter circuit that uses SFQ components and the arbiter circuit operates at 60 GHz. We also have developed a high Tc superconducting (HTS) SFQ sampler system for observing ultra-fast signal waveforms. In addition, we will discuss the prospects of future superconducting devices based on the fabrication technologies we developed.

IEEE Transactions on Applied Superconductivity•Mar 1, 2001•24 citations
Superconductive electronics offers a unique combination of high bandwidth and low power for mission critical hardware such as digital processors at 20 to 100 GHz, microwatt per bit analog to digital converters, large digital switches at multi-Gb/s data rates, and low noise parametric amplifiers. This cryogenic technology, typically operating at a few degrees or a few tens of degrees Kelvin, depends upon the unique physics of superconducting materials such as Nb, NbN, and YBaCuO, and the fundamental circuit element, the Josephson junction (JJ) to create unique architectures of unprecedented design efficiency and performance. These circuits are based on the single flux quantum (SFQ) logic family, a technology that has no parallel in semiconductor electronics. Digital data is transmitted by voltage pulses with amplitude less than 1 mV, but at extremely high speeds. Individual gates have been operated as high as 370 GHz. In this paper, we present a brief overview of superconductive digital technology, describe some recent circuits, and discuss how the challenges to superconductive technology are being met, including the use of multi-chip module (MCM) technology, and the potential use of III-V HBT and HEMT circuits to provide interface drivers and amplifiers, possibly operated cryogenically.
The authors argue that superconducting digital electronics is the future trend for high-speed and low-power applications. Low-T/sub c/ technology based on stable Nb-AlO/sub x/-Nb tunneling junctions has been successful in constructing most of the digital circuit logic elements. A four-stage shift register constructed with latching logic operated up to 4 GHz with a power consumption of about 60 mu W per gate. A 12-b analog-digital coverter constructed with a single flux quantum (SFQ) logic showed proper operation with the total power dissipated being only about 100 mu W. Fabrication of Josephson tunneling junctions with high-T/sub c/ materials has been tougher than with low-T/sub c/ materials. However, recently developed very high speed rapid single flux quantum (RSFQ) logic circuits can be applied to weak link type junctions fabricated with YBa/sub 2/Cu/sub 3/O/sub 7-x/ films. Simulations of the various circuits with weak link type junctions, e.g., shift registers, analog-digital converters, etc., show fast operation and reasonable margins. Applications of similar concepts can be applied to NbN circuits operating at above 10 K.>
Single-flux quantum logic (SFQ) circuits, in which a flux quantum is used as an information carrier, have the possibility for opening the door to a new digital system operated at over 100-GHz clock frequency at extremely low power dissipation. The SFQ logic system is a so-called pulse logic, which is completely different from the level logic for semiconductors like CMOS, so circuit design technologies for SFQ logic circuits have to be newly developed. Recently, much progress in basic technologies for designing SFQ circuits and operating circuits at high speeds has been made. With advances in these design tools, large-scale circuits including more than several thousand junctions can be easily operated with the clock frequency of more than several tens of gigahertz. High-end routers and high-end computers are possible applications of SFQ logic circuits because of their high throughput nature and the low power dissipation of SFQ logic. In this paper, recent advances of SFQ circuit design technologies and recent developments of switches for high-end routers and microprocessors for high-end computers that are considered possible applications for SFQ logic will be described.
Single flux quantum (SFQ) logic circuits, in which a single flux quantum is used for an information carrier, have a possibility to open a new digital system operated with over 100 GHz clock frequencies at extremely low power dissipations. Recently, much progress in basic technologies for designing SFQ circuits and operating circuits with high speeds has been done. By taking advancements in these designing tools, circuits including more than several thousands junctions easily operated with the clock frequency of more than several tens GHz. Applications of SFQ circuits such as high performance computers, high end router and high end servers are being developed in the world taking advantages of the high through-put nature and the low power dissipation of the SFQ logic.
Key digital circuits for signal processing with tens of gigahertz speed and a few microwatts power dissipation have been recently demonstrated using a simple, 2 /spl mu/m linewidth process. These are the fastest digital circuits reported to date. These circuits use novel rapid single flux quantum (RSFQ) technology that takes advantage of the fundamental properties of superconductivity. In this technology, data and clock are picosecond-long quantized voltage pulses corresponding to the transfer of single magnetic flux quanta, /spl Phisub 0/=h/2e=2 mVps. These SFQ pulses are regenerated at each gate and are processed by circuits comprised of overdamped Josephson junctions interconnected via microstrip inductances. The inherent internal memory of all RSFQ gates (primarily flip-flops), combined with high switching speed, makes serial, bit-pipelined circuit design advantageous. This paper presents experiments in RSFQ digital circuits, including an N/spl times/8b serial multiplier, and on-chip test systems based on RSFQ shift registers and on SFQ samplers. They enable test and study of RSFQ circuits at full GHz speed while communicating with semiconductor electronics at low speed.>
Interface circuits are the key components that enable the hybrid integration of superconductor and semiconductor digital electronics. The design requirements of superconductor-semiconductor interface circuits vary depending on the application, such as high-performance classical computing, superconducting quantum computing, and digital signal processing. In this survey, various interface circuits are categorized based on the working principle and structure. The superconducting output drivers are explored, which are capable of converting and amplifying, e.g., single flux quantum (SFQ) voltage pulses, to voltage levels that semiconductor circuits can process. Several trade-offs between circuit- and system-level design parameters are examined. Accordingly, parameters such as the data rate, output voltage, power dissipation, layout area, thermal/heat load of cryogenic cables, and bit-error rate are considered.
Superconducting devices have intrinsically superior characteristics to those of semiconductor devices. Presently, we can fabricate more than twenty thousand junctions on one chip using niobium technology. We have demonstrated the operation of a network system with a superconducting interconnection chip using voltage-state logic. Single flux quantum devices are promising for future superconducting applications because the clock frequency of SFQ logic is higher than that of voltage-state. We have proposed a high-end switch based on hybrid architecture using optical devices, semiconductors and SFQ devices. To demonstrate the high-speed operation of SFQ circuits, we developed an arbiter circuit that uses SFQ components and the arbiter circuit operates at 60 GHz. We also have developed a high Tc superconducting (HTS) SFQ sampler system for observing ultra-fast signal waveforms. In addition, we will discuss the prospects of future superconducting devices based on the fabrication technologies we developed.